Kenmore 59679242015 refrigerator Parts

For Kenmore model 59679242015, the model number alone usually does not state the exact cubic-foot capacity. The most reliable way is to look up the model’s published specs or calculate capacity from the interior measurements (refrigerator and freezer) and convert cubic inches to cubic feet.

• Look up the model specs using the full model number 59679242015 (this is the quickest when specs are listed).
• Measure the interior and calculate (best when you cannot find a spec sheet).
• Use the label as a cross-check: the model/serial label inside the fresh-food section confirms you have the correct model number.

1. Empty enough space to measure the inside of the refrigerator compartment and freezer compartment.
2. Measure each compartment’s height, width, and depth in inches.
3. Compute each compartment’s volume in cubic inches:
   • height × width × depth
4. Convert to cubic feet:
   • cubic inches ÷ 1728 = cubic feet
5. Add refrigerator + freezer results for total capacity.

• Measure to the inside liner, not the door bins.
• If shelves or drawers reduce usable space, measure the largest open rectangle you can; this gives a practical estimate.
• Take depth to the back wall, not to the front edge of shelves.

Cubic feet helps you compare refrigerator sizes, choose storage accessories, and estimate how much airflow space you need when organizing shelves and bins. It also helps when ordering parts that relate to capacity-driven features like filtration and dispensing.

If you are also replacing filtration parts while you’re checking specs, we list the compatible Kenmore refrigerator water filter (9084) EDR4RXD1 for this model.

Last updated: February 2026

Your Kenmore refrigerator model number is printed on the appliance’s ID tag; for Kenmore model 59679242015, it’s typically inside the fresh food compartment on a side wall or ceiling, or on a frame edge behind a crisper drawer. That model number is what we use to match the correct parts list.

Check these common locations first (use a flashlight and look for a white or silver sticker/plate):

• Inside the refrigerator section on the left or right side wall
• On the ceiling of the fresh food compartment near the light
• On the frame edge behind the crisper drawers (remove drawers to see it)
• Along the door jamb area (where the door seals against the cabinet)
• Behind the lower kick plate or toe grille (less common, but worth checking)

Kenmore model numbers are usually a long string of numbers (sometimes with dots or letters). The exact model number is the key to getting the right refrigerator parts, diagrams, and fit information.

Use these steps to narrow it down so you can still order parts:

• Check any purchase paperwork or service receipts for the full model number
• Look for a second tag location (many refrigerators have more than one)
• If only part of the number is readable, write down every character you can see
• Match visible features (bottom-mount freezer, dispenser, shelf style) to the parts diagrams for the closest Kenmore models
• Start with common maintenance items once you confirm fit, such as the Kenmore refrigerator water filter (9084) EDR4RXD1

Kenmore refrigerators often share similar styling across multiple model families; using the exact model number prevents ordering the wrong door gasket, shelf, switch, or water filter and saves time on returns.

Last updated: February 2026

A bad compressor in your Kenmore 59679242015 bottom-mount refrigerator usually shows up as warm temperatures in both sections, a repeating click or hum with no sustained running, or the unit tripping off shortly after trying to start. Before condemning the compressor, we rule out airflow and start-device issues.

• Refrigerator and freezer both warm even though interior lights work
• Compressor area clicks every few minutes (overload cycling)
• Compressor is very hot to the touch and shuts off quickly
• Loud buzzing, grinding, or knocking from the compressor area
• Condenser fan runs but cooling does not improve

Many “bad compressor” symptoms are caused by simpler problems. Check these in order:

• Condenser fan operation: If the fan by the compressor is not running, the system can overheat and stop cooling. A failed refrigerator condenser fan motor W11613295 can mimic compressor trouble.
• Airflow and frost pattern: Heavy frost on the evaporator cover or weak airflow points to an airflow/defrost issue, not the compressor.
• Power reset: Unplug for 5 minutes, then plug back in; listen for a steady compressor run (not just a click).
• Door sealing: Warm temps from air leaks can look like a sealed-system problem; inspect gaskets and alignment.

Replacing a compressor is a major sealed-system repair. Confirming basics like condenser fan cooling and airflow prevents unnecessary parts replacement and gets you to the right fix faster.

If a technician confirms the compressor is not starting (locked rotor) or is electrically open/shorted, replacement is the correct repair. For this model, the compressor is available as refrigerator compressor W10233960.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 59679242015 are cooling issues, ice maker or water dispenser trouble, leaks, frost buildup, and unusual noises. These usually trace back to airflow restrictions, dirty condenser coils, door sealing problems, or a failing fan or switch.

• Not cooling or warm fridge section: blocked vents, dirty condenser coils, evaporator fan issue, or sealed-system/compressor trouble
• Freezer cold but fridge warm: airflow damper/vents blocked, frost on evaporator, or weak evaporator fan
• Water leaking or puddles: clogged defrost drain, loose water line, cracked reservoir, or filter housing connection
• Ice maker not making ice: water supply issue, frozen fill tube, dispenser/ice path blockage, or control problem
• Noisy operation: condenser fan motor, fan blade rubbing, or ice buildup contacting the fan
• Light or door-related issues: failed door/light switch causing lights to stay on or not come on

• Confirm temperatures: 0°F in the freezer and 37°F in the fresh food section.
• Make sure air vents inside the cabinet are not blocked by food containers.
• Clean condenser coils and verify the condenser fan runs when the compressor is running.
• Check door closing and gasket contact all the way around.
• If you have a dispenser, replace the water filter on schedule and purge air from the line.

Cooling, leaks, and frost problems usually get worse quickly. Catching a weak fan, a poor door seal, or a restricted water filter early helps protect food, reduce compressor run time, and prevent ice buildup that can damage airflow.

• How to replace the water filter in a Kenmore refrigerator
• How to fix a fridge door seal
• How to fix your evaporator cooling fan

Last updated: February 2026

Accela Chill is a name some people use for a temporary “quick cool” function that boosts cooling for a short period after heavy door openings or loading groceries. On Kenmore model 59679242015, the exact feature name and behavior depend on the control panel options on your unit.

Check the refrigerator’s control panel and look for a dedicated button or indicator light. Common quick-cool labels include:

• Max cool
• Fast cool
• Quick cool
• Turbo cool
• Power cool

If you do not see a quick-cool option on the controls, your model is operating with standard automatic temperature recovery.

When enabled, quick-cool modes usually change operation in these ways:

• Runs the compressor longer to pull temperatures down faster
• Increases airflow by running fans more aggressively
• Helps the fresh-food section recover after frequent openings
• Turns off automatically after a set time on many models

Use quick cool when:

• You just loaded a lot of room-temperature food
• Doors were open for cleaning or organizing
• You want faster temperature recovery after a party or shopping trip

Do not use it as a fix for:

• Warm refrigerator and warm freezer (cooling system issue)
• Poor airflow from blocked vents or heavy frost
• A door that is not sealing

Quick-cool features help keep food temperatures stable after heavy use, but they cannot overcome airflow blockages or failing cooling components. If cooling performance is inconsistent, start with airflow and fan checks.

For step-by-step fan troubleshooting, use how to fix your evaporator cooling fan.

Last updated: February 2026