Kenmore 11027132412 washing machine Parts

A Kenmore washer typically lasts 10 to 15 years under normal household use. For your Kenmore top-loading high efficiency washer model 11027132412, consistent care (HE detergent, correct loading, and routine cleaning) helps you reach the longer end of that range; neglected maintenance shortens it.

What affects lifespan the most

• Overloading the basket and running frequent heavy cycles
• Using non-HE detergent or too much detergent (causes residue and extra wear)
• Chronic out-of-balance loads and vibration
• Hard water buildup and poor cleaning habits
• Small leaks or slow drains that go unaddressed

Maintenance that extends life (high impact)

We recommend following the care steps in the 11027132412 use and care guide. Focus on these habits:

• Use HE detergent only and measure carefully
• Leave the lid open between loads to reduce odor and moisture
• Run a monthly cleaning cycle (washer cleaner or approved method)
• Check pockets and avoid washing items that can shed debris (coins, pet hair clumps)
• Level the washer and keep loads evenly distributed

Common wear items vs. major repairs

Some parts wear gradually; replacing them can be more cost-effective than replacing the washer.

What you notice	Common area involved	Example part for this model
Won’t start, lid won’t lock	Lid lock system	Washer lid lock assembly W10810403
Won’t drain or drains slowly	Drain pump or drain path	Washer drain pump W10876600
Loud banging, excessive shaking	Suspension/dampers	Damper assembly W11130359
Poor agitation or slipping during wash	Clutch/drive components	Clutch assembly W10754448

Why it matters

Knowing the typical 10 to 15 year lifespan helps you decide whether to invest in a repair (like a lid lock, drain pump, or suspension kit) or plan for replacement, especially if multiple symptoms show up at once.

Last updated: February 2026

Your Kenmore washer model number is printed on the appliance ID label; for this washer, the model is 11027132412. On most Kenmore top-load washers, you will find the label under the lid around the tub opening, on the rear panel, or near the control console; match the full number exactly to get the right parts and instructions.

Where to look on model 11027132412

Check these common label locations first:

• Under the lid, along the rim of the tub opening
• On the back of the washer cabinet (rear panel area)
• Near the control console or along the side seam
• Occasionally inside the lid area near the hinge

If the label is worn, use the model number printed on your paperwork and confirm it against the washer’s features in the 11027132412 owner’s manual.

What the model number tells us (and why it matters)

Kenmore model numbers help us match the correct diagrams, parts, and repair steps. For example, 11027132412 is a Kenmore top-loading high efficiency, low-water washer that is designed to use HE (High Efficiency) detergent.

Quick guide: model number vs. other numbers

What you see	What it is	What we use it for
11027132412	Model number	Correct parts list and manuals
Serial number	Unique unit ID	Warranty and production info
Part number / part ID	Component identifier	Ordering the exact replacement part

Tips to avoid ordering the wrong part

Use these checks before you buy a replacement part:

• Copy the model number exactly (all digits, no spaces)
• Compare the model number on the label to your paperwork
• Use the model number to confirm the correct part ID (example: washer lid lock assembly W10810403)
• If your washer has multiple similar versions, match by model first, then by symptom

Why it matters

Kenmore washers often share a similar look across model variations, but internal parts like the lid lock, drive system, and washplate can differ. Using the exact model number 11027132412 prevents fit issues and repeat repairs.

Last updated: February 2026

The Kenmore washer model 11027132412 is a top-loading, high-efficiency, low-water washer; its capacity is typically about 3.2 to 3.5 cubic feet for this style. For the exact listed capacity for your unit, check the specifications section in the 11027132412 use and care guide.

How to confirm the exact capacity for model 11027132412

Capacity is usually shown in the product specifications or features pages of the manual.

• Look for “Capacity” or “Washer capacity (cu. ft.)” in the specs section
• Check the model list on the cover to confirm you are reading the correct manual group
• If your washer has a tech sheet stored inside the cabinet, it may list capacity as well
• Use the full model number 11027132412 when comparing specs to similar Kenmore 110 models

Why capacity matters (and what it changes)

Knowing cubic feet helps us match the right load size, cycle choice, and detergent amount so the washer cleans well without overloading the drive system.

Quick guide: what “about 3.2 to 3.5 cu. ft.” means in real use

Load type	Typical fill level	What to watch for
Towels/jeans	1/2 to 2/3 full	Avoid packing; heavy loads can unbalance in spin
Mixed everyday loads	Around 1/2 full	Best cleaning and turnover for HE low-water wash action
Bulky items (bedding)	1/3 to 1/2 full	Keep items loose so they can move and rebalance

If the washer struggles with large loads

If you notice banging, off-balance spinning, or poor turnover, reduce load size and make sure the basket can move freely. Worn suspension can also contribute; the damper assembly is a common wear item on top-load designs.

Last updated: February 2026