Kenmore Elite 10656682501 side-by-side refrigerator Parts

Kenmore Elite refrigerator capacity (cubic feet) depends on the exact model. For Kenmore Elite model 10656682501, the most reliable way to confirm the exact cubic-foot capacity is to check the model’s specifications in the 10656682501 owner's manual.

We recommend using these quick checks so you get the correct number for your exact side-by-side configuration:

• Look for a “Capacity” or “Product specifications” section in the manual
• Check the model/serial tag inside the fresh food compartment (often on a side wall)
• Compare the interior layout (shelf and bin configuration) to the manual’s feature diagrams
• If you are comparing models, confirm you are not mixing side-by-side and French door capacities

Most Kenmore Elite side-by-side refrigerators are commonly in this general range:

Capacity affects how the refrigerator cools and how you shop for accessories. For example, the correct water filter and storage-bin fitment are model-specific, so confirming the exact model (and its specs) helps avoid ordering the wrong part.

If you are also replacing the filter on this model, use the refrigerator water filter EDR3RXD1 that matches the replacement filter part number listed for this unit.

Last updated: January 2026

Most Kenmore Elite refrigerators, including model 10656682501, do not use a single dedicated “reset button” for the whole refrigerator. Instead, we reset the controls by turning the unit OFF then ON at the control panel, or by disconnecting power briefly and then restoring your temperature settings using the instructions in the 10656682501 owner's manual.

Use the method that matches what you are trying to fix.

• Control reset (recommended first): For models with digital controls, turn the unit OFF then ON to reset.
• Power reset: Turn the control OFF, unplug the refrigerator (or switch off the breaker), then reconnect power and set the control back to your desired setting.
• Control lockout check: If buttons beep but settings do not change, press and hold LOCK for 2 seconds to toggle Control Lockout.
• After a power reset: Give the refrigerator about 30 minutes to resume normal operation (it may be in an automatic defrost cycle).

These checks often solve the root cause faster than repeated resets:

• Make sure the refrigerator/freezer control is not set to OFF.
• Confirm doors close fully and seals are making contact (gasket issues can mimic cooling problems).
• Clean condenser coils if airflow is restricted.
• Avoid blocking air vents inside the compartments.
• If you turned the refrigerator on before connecting the water line, keep the ice maker OFF until water is connected.

A “reset” only restarts the control system. If airflow, dirty coils, door sealing, or a locked control panel is the real issue, the refrigerator can keep warming even after a reset.

Last updated: January 2026

For the Kenmore Elite side-by-side refrigerator model 10656682501, the exact overall dimensions (height, width, depth) depend on the specific configuration and how depth is measured (case only vs. with handles). We use the 10656682501 owner's manual to confirm the correct measurement points for your unit.

Use a tape measure and record in inches. For the most useful “fit” measurement, we recommend measuring the space and the refrigerator.

• Width: widest point of the cabinet (and separately, with doors/handles if they stick out)
• Height: floor to top of cabinet (and separately, to top hinge cover if higher)
• Depth: back of cabinet to front (measure with handles and without handles)
• Door swing clearance: space needed for doors to open fully
• Ventilation clearance: space behind/above for airflow

If you need a planning estimate before you measure, most side-by-side refrigerators of this type are commonly in these ranges:

• Measure the opening (width, height, depth) at the front and at the back
• Confirm the refrigerator can pass through doorways and hallways
• Plan for door removal if needed during moving
• Leave clearance so the doors do not hit walls or cabinets
• Make sure the unit can be leveled so doors seal properly

Accurate dimensions help prevent delivery and installation problems, reduce door-swing interference, and support proper airflow for cooling performance. It also helps when ordering items like door bins, shelves, or a replacement water filter.

Last updated: January 2026

On Kenmore Elite refrigerator model 10656682501, the ER IF (or Er IF) code points to an ice fan (freezer ice compartment fan) airflow problem. That fan moves cold air through the freezer and into the ice maker area; when airflow drops, ice production and temperatures can be affected. See the 10656682501 owner's manual for model-specific checks.

• Power reset: unplug the refrigerator (or turn off the breaker) for 2 minutes, then restore power.
• Ice chute and ice maker area: remove any clumped ice that could block airflow.
• Ice bin and freezer vents: make sure packages are not blocking vents.
• Door closure: confirm the freezer door seals fully and is not held open by a bin or food item.
• Recent heavy use: if you just emptied a lot of ice, allow 24 hours for normal ice production to recover.

If ice production is weak or cubes are small, water supply issues can add symptoms even when the fan is fine.

• Confirm the household shutoff valve is fully open.
• Check for kinks in the supply line.
• If a filter is installed, reseat it and confirm it is not clogged.
• If you need the correct replacement, use the refrigerator water filter EDR3RXD1 listed for this model.

The ice fan is what delivers freezer air to the ice maker area. When airflow is restricted, the ice maker can warm up, slow down, or stop producing normally, and the refrigerator may keep trying to correct temperatures.

Last updated: January 2026