Kenmore 91193601002 range Parts

To reset your Kenmore electric range model 91193601002, turn the oven control to OFF, then disconnect power to the range for at least 30 seconds and restore power. This clears many control glitches and can stop repeating beeps tied to an “F” function error.

• Turn the oven control knob to OFF.
• Unplug the range, or switch OFF the range breaker.
• Wait 30 seconds.
• Restore power.
• Set the clock if the display shows PF (power failure).

Reference: 91193601002 owner's manual

An “F” followed by a number indicates a function error. We recommend this sequence:

• Write down the exact code (example: F1, F3).
• Turn the oven control knob to OFF.
• Reset power for 30 seconds.
• Retry baking or broiling.

If the “F” code happened during self-clean, also check the door latch position.

• Turn the oven control knob to OFF.
• Make sure the door latch is moved to the right as far as it will go.
• Let the oven cool for 1 hour.
• Retry the cycle.

A proper reset restores the control’s normal startup state after a power interruption or control glitch. It is also the first step we use when troubleshooting “F” function errors on the 91193601002.

Last updated: January 2026

On the Kenmore range model 91193601002, PF means a power failure; the control detected that power was interrupted. After PF appears, you typically need to reset the clock and re-enter any cooking settings that were in progress.

Follow these steps from the 91193601002 owner's manual:

• Touch the CLOCK pad; the display should flash 12:00.
• Touch the CLOCK pad again.
• Use the HOUR/MINUTE arrow pads to set the correct time.
• Re-enter any bake, broil, timer, or delayed-start settings you were using.
• If PF returns repeatedly, check for a loose power cord connection or a tripped breaker.

PF is a notification, not a heating-element failure. Here is what to expect:

A PF code is your range telling you it lost power long enough to interrupt operation. Resetting the clock restores normal control operation and helps ensure timed features (timer, delayed bake, automatic shutoff) behave correctly.

Last updated: January 2026

Kenmore Elite gas ranges are built for Kenmore by different OEM manufacturers, so the maker depends on the exact model number on your range. Model 91193601002 is an electric range model; use the model tag and the 91193601002 owner's manual to confirm what you have before identifying the OEM.

The most reliable way is to use the full model number from the rating label, then match it to the correct parts and documentation.

• Find the model and serial label on the appliance (often behind the storage drawer or on the oven frame).
• Write the model number exactly as shown (all digits and punctuation matter).
• If your model starts with a different prefix than 911, it may point to a different OEM family.
• Match your control panel layout and features to the 91193601002 owner's manual if you believe you have this model.
• Use the model number when ordering parts; the OEM is effectively identified by the model platform.

Kenmore is a brand name; Kenmore Elite ranges have been sourced from multiple manufacturers over time. Two Kenmore Elite gas ranges can look similar but use different igniters, gas valves, oven controls, and wiring.

Identifying the correct OEM build prevents wrong-part returns and helps ensure safe, correct repairs, especially on gas components like igniters, regulators, and valves.

Last updated: January 2026