Kenmore 10656663500 refrigerator Parts

Kenmore side-by-side refrigerator model 10656663500 is a full-size unit; plan for a cabinet footprint in the mid-30-inch width range and standard side-by-side height and depth. For the exact exterior dimensions and capacity for your unit, use the 10656663500 owner's manual.

What “big” should include for planning

When we size a refrigerator, we look at more than just cubic feet:

• Overall width, height, and depth (fit in the opening)
• Depth with doors and handles (how far it projects)
• Door swing clearance (space to fully open doors and drawers)
• Ventilation clearance (airflow so it cools correctly)

Installation clearances for model 10656663500

Your manual gives clear guidance that affects the real installed footprint:

• Allow 1/2 inch (1.25 cm) space on each side and at the top for ventilation
• If installed next to a fixed wall, leave at least 2 inches (5.08 cm) on the wall side (depending on setup) so the door can swing open
• If the refrigerator has an ice maker, allow extra space at the back for the water line connection

Quick sizing checklist

Use this checklist before you measure the opening:

• Measure the opening width at top, middle, and bottom
• Measure height to the lowest cabinet or soffit
• Measure depth to the front edge of surrounding cabinets
• Confirm a nearby water supply location if you use the dispenser/ice maker

Measurement you need	Where to confirm it
Exact exterior dimensions	10656663500 owner's manual
Required clearances	10656663500 owner's manual
Water line space needs	10656663500 owner's manual

Why it matters

Correct sizing prevents door-interference, poor airflow, and warm temperatures. It also helps when ordering fit-critical parts like shelves, bins, and the correct water filter such as the refrigerator water filter EDR3RXD1.

Last updated: January 2026

The most common issues we see with the Kenmore 10656663500 side-by-side refrigerator involve no ice or slow ice production, water dispenser problems or leaks, warm temperatures from poor airflow, and frost buildup from defrost system trouble. Many of these symptoms trace back to the water filter, inlet valve, ice maker, or airflow components.

Common problems and what to check first

• No ice or small/hollow cubes: confirm the freezer is near 0°F and replace a clogged filter.
• Water dispenser slow or not dispensing: check for a restricted filter and verify household water supply is fully open.
• Leaking at the back or under the unit: inspect the water line connections and the inlet valve.
• Fridge warm but freezer cold: look for blocked vents and a stuck diffuser.
• Frost on the back wall of the freezer: suspect a defrost issue (heater or defrost bi-metal).

Quick symptom-to-part map (most likely causes)

Symptom	Most common cause	Parts that often fix it (examples)
No ice / intermittent ice	Ice maker not cycling, water supply issue	Refrigerator ice maker assembly 2198597, refrigerator inlet valve W10408179
Slow water flow	Clogged water filter	Genuine Kenmore refrigerator water filter EDR3RXD1
Frost buildup / warming	Defrost failure	Refrigerator defrost bi-metal WPW10225581, refrigerator heater WP2323198
Warm fresh food section	Airflow restriction or diffuser issue	Refrigerator air diffuser WP2216112

Steps we use to narrow it down

1. Verify temperatures: freezer about 0°F; refrigerator about 37°F.
2. Check airflow: make sure vents are not blocked by food packages.
3. Rule out the filter: if flow is weak or ice is slow, replace the filter first.
4. Inspect for ice jams: clear the ice bin and check the auger path.
5. Look for defrost clues: heavy frost points to a defrost heater/bi-metal issue.

Why it matters

These checks prevent unnecessary part replacement and protect food safety. For example, a restricted filter can mimic an ice maker failure, and a defrost problem can cause both frost buildup and warming.

For model-specific component locations and diagnostic steps, use the 10656663500 owner's manual.

Last updated: March 2026

The model number for your Kenmore side-by-side refrigerator is printed on the model and serial number label inside the fresh food (refrigerator) compartment. On model 10656663500, the label is located on an inside wall of the refrigerator section; match that number to 10656663500 when ordering parts.

Where to look (fast checklist)

• Open the refrigerator (fresh food) door, not the freezer door
• Look along the inside walls of the refrigerator compartment
• Check near the crisper area and side walls at eye level
• Find a sticker or metal tag that lists Model and Serial
• Write down the full model number and serial number exactly as shown

What the label looks like

Most Kenmore refrigerators of this type use a rectangular label that includes:

• Model number (for example, 10656663500)
• Serial number
• Electrical ratings (volts/amps)
• Manufacturing information

Item on label	Why it matters
Model number	Ensures diagrams and parts match your exact refrigerator
Serial number	Helps identify production range and compatible revisions
Purchase date (your records)	Useful for service history and maintenance tracking

Why it matters

Kenmore model numbers can look similar across the 106 series; using the exact model number from the inside label prevents ordering the wrong water filter, ice maker assembly, or door parts.

Tip for ordering parts

Once you confirm the model number, use it to select parts that fit, such as the genuine Kenmore refrigerator water filter EDR3RXD1 if your unit uses the base grille filter style.

For the exact label location details and product record section, use the owner's manual.

Last updated: March 2026