Kenmore Elite 79078923000 gas range Parts

A Kenmore gas range like model 79078923000 typically lasts 15 years with normal household use. Keeping burners clean, ensuring proper ignition, and addressing weak oven heating early (often igniter-related) helps you get the full service life; see the 79078923000 installation guide for safe operating checks.

Typical lifespan and what affects it

Most ranges reach their expected life when heat and ignition components stay in good condition.

• Cooking frequency and high-heat use (daily cooking shortens life)
• Burner cap and burner head cleanliness (prevents poor flame and delayed ignition)
• Oven ignition health (slow ignition strains components)
• Proper gas supply and leak-free connections
• Keeping vents and airflow paths clear to reduce heat stress on controls

Quick “is it wearing out?” checklist

If your range is approaching the 10 to 15 year mark, these symptoms often signal it is time for repair planning.

Symptom	Common cause	What we recommend
Surface burner clicks but lights slowly	Dirty burner ports or mis-seated cap	Clean and reseat caps; verify each burner lights within about 4 seconds
Oven takes 30 to 60 seconds before flame appears, then gets slower over time	Weak igniter or gas flow issue	Compare ignition timing; inspect igniter circuit and flame quality
Oven temperature swings or bakes unevenly	Sensor drift or control issue	Test the range oven temperature sensor 5304504897 and check calibration steps in the manual
Oven light out repeatedly	Bulb/socket wear	Replace the range oven light bulb 316538904 and inspect the socket for heat damage

Why it matters

A gas range can keep running well past mid-life, but ignition delays and unstable temperatures waste gas, increase cooking time, and can overheat wiring and controls. The installation instructions also call out verifying proper burner ignition and flame after hookup, which is a good performance baseline to revisit over time.

Maintenance that extends life

• Keep burner caps installed and properly seated during use
• Prevent spills and cleaners from entering burner gas openings
• Clean burner heads and caps regularly; dry fully before reassembly
• If the oven flame is slow to appear, troubleshoot promptly (often igniter-related)

Last updated: February 2026

On the Kenmore Elite gas range model 79078923000, the model number is typically printed on a rating label around the oven door opening or on the frame behind the lower storage or warming drawer. Use the exact model number from that label when ordering Range parts or looking up specs in the 79078923000 owner's manual.

Common model number label locations

Check these spots in order (they are the most common on Kenmore ranges):

• Door jamb/frame: open the oven door and look along the front frame (left or right side).
• Behind the bottom drawer: pull the storage or warming drawer fully out and look on the frame rails.
• Back panel: look near the rear cover or vent area.
• Side frame: sometimes on a side panel edge, visible when the drawer is removed.

Quick steps to find it fast

1. Turn the oven light on and use a flashlight to scan the front frame.
2. Remove the bottom drawer (most slide out; lift slightly at the end of the travel and pull).
3. Write down the full model number and the serial number exactly as shown.

What the label looks like

Most labels include the same key fields:

Label field	What to copy	Why it matters
Model	79078923000	Ensures diagrams and parts match your exact range
Serial	Letters and numbers	Helps confirm production run and compatible revisions
Gas type	Natural gas or LP	Needed for correct orifices and conversions

Why it matters

Kenmore Elite ranges often have multiple versions that look similar. Using the exact model number prevents ordering the wrong igniter, control board, burner parts, or an LP conversion kit.

Last updated: February 2026

Kenmore is a brand name, and the Kenmore Elite gas range model 79078923000 was manufactured for Kenmore by another appliance maker (Kenmore does not operate its own range factory). For this model, the most reliable way to confirm the actual manufacturer is to use the identification information and documentation for the unit.

How to identify the actual manufacturer for model 79078923000

Use these checks in order; they work even if the range has been moved or the kitchen has been remodeled:

• Check the serial plate location: it is on the decorative bottom trim and is visible when the lower oven door is opened.
• Compare the serial plate details to the information in the 79078923000 installation guide.
• Use the model and serial information when ordering parts such as an igniter, spark module, or oven control.
• If you are matching parts by design, look for telltale features like burner head style, igniter connector type, and control layout.

Why the maker matters for parts and troubleshooting

Different manufacturers use different wiring layouts, igniter styles, and gas valve configurations. Confirming the maker helps you avoid ordering the wrong component and speeds up diagnosis.

What you are doing	What to use	Why it helps
Ordering replacement parts	Model and serial plate info	Ensures correct fit and electrical/gas compatibility
Diagnosing ignition problems	Wiring diagram and component IDs	Helps trace power to igniters and spark module
Planning service	Installation and safety notes	Reduces risk when checking gas connections

Helpful part examples for this model

If you are troubleshooting symptoms, these are common parts customers replace on gas ranges like the 79078923000:

• Range spark module 5304508269 for weak or no sparking at surface burners
• Frigidaire range bake igniter 316489406 for an oven that will not heat or takes too long to ignite
• Range oven temperature sensor 5304504897 for inaccurate oven temperatures

Why it matters

Kenmore model numbers often map to a specific manufacturing platform; confirming the platform using the serial plate and the documentation helps ensure the right Kenmore Elite range parts, wiring, and gas components are selected.

Last updated: February 2026