Kenmore 2537034341H bottom-mount refrigerator Parts

Kenmore refrigerator model 2537034341H is a 253.7034* series French door bottom-freezer design; units in this series are typically about 22 to 23 cubic feet. For the exact capacity for your specific color/variation, we recommend confirming it in the 2537034341H owner's manual.

How to confirm the exact capacity on your refrigerator

We use these quick checks to verify cubic feet without guessing:

• Check the model/serial plate inside the fresh food compartment (the manual notes it is located inside the refrigerator compartment).
• Look for a “capacity” or “total capacity” line on the product label or specification section.
• Match your full model (including any color code) to the specifications section in the 2537034341H owner's manual.
• If you are measuring for storage planning, use interior shelf and bin layout as the practical guide (usable space can differ from total cu. ft.).

Typical capacity range for this Kenmore style

Most Kenmore 253-series French door bottom-freezer refrigerators land in a narrow capacity band.

Refrigerator type	Typical total capacity	Notes
French door bottom-freezer (Kenmore 253 series)	22 to 23 cu. ft.	Common for standard-width cabinets
Larger French door models	24 to 28 cu. ft.	Often deeper or wider footprints

Why it matters

Cubic feet helps when you are comparing replacement models, planning kitchen fit, or deciding whether issues like warm temperatures are caused by overloading and blocked airflow. Keeping vents clear and doors sealing well protects cooling performance.

Related maintenance that protects cooling performance

• Keep the toe grille area unblocked for proper air circulation.
• Replace the air filter on schedule to help control odors: refrigerator air filter EAFCBF.
• Make sure doors close squarely and gaskets seal evenly.

Last updated: January 2026

Water leaking underneath your Kenmore bottom-mount refrigerator model 2537034341H is usually caused by a defrost drain that’s clogged or frozen, or by a water supply issue (ice maker line, inlet valve, or fittings) that drips and runs down to the floor. Use the steps below to pinpoint the source.

Quick checks (fastest way to find the leak)

• Look for a puddle location: front center, left/right front corner, or under the back.
• Check the freezer floor for a sheet of ice (often points to a defrost drain problem).
• Pull the refrigerator straight out and inspect the water line loop and connections.
• Confirm the ice maker is off if you are not connected to water (per the 2537034341H installation guide).
• Inspect the drain pan underneath for cracks or overflow.

Most common cause: clogged or frozen defrost drain

When the defrost drain backs up, meltwater can overflow inside, then run down and leak underneath.

What to do

• Unplug the refrigerator.
• Remove items and access the drain opening at the back bottom inside the fresh food section or freezer area (varies by configuration).
• Flush the drain with warm water; clear debris with a soft tube brush or pipe cleaner.
• If it refreezes quickly, check door sealing and freezer temperature.

Water supply and ice maker leak points

If the unit is connected to water, leaks often come from fittings or the valve.

Symptom	Most likely area	What to check
Puddle near back	Water line/fittings	Loose compression nut, kinked tubing, damaged ferrule
Slow drip, intermittent	Inlet valve	Cracked valve body, seeping outlet, mineral buildup
Leak after moving	Water line loop	Not enough slack, stressed connection

If you suspect the valve, the correct model-compatible part is the refrigerator water inlet valve assembly 242253002.

Why it matters

Leaks can damage flooring and can also lead to ice buildup that restricts airflow, causing warm temperatures and poor ice production.

Helpful reference

• How to get rid of refrigerator puddles

Last updated: January 2026

Yes. Many manufacturers make 34-inch wide refrigerators, including bottom-freezer and French door styles. Your Kenmore bottom-mount refrigerator model 2537034341H is a different specific model; use the space you have (width, height, depth, and door swing) to choose the best 34-inch fit.

How to shop for a 34-inch wide refrigerator

When you compare 34-inch models, we recommend checking these specs first:

• Overall width (cabinet and doors)
• Depth: standard-depth vs counter-depth
• Height (including hinges)
• Door swing clearance and drawer pull-out clearance
• Water/ice features (needs a water line)
• Ventilation clearance around the cabinet

For installation clearances, our guidance for 2537034341H includes typical minimum spacing of 3/8 inch at the sides and top and 1 inch at the back; confirm the exact requirements for any new model in its documentation. See the 2537034341H owner's manual.

Quick comparison: 34-inch vs 36-inch refrigerators

Feature	34-inch wide	36-inch wide
Fit in tighter openings	Better	May require cabinet changes
Interior capacity	Typically less	Typically more
Model selection	Fewer options	More options
Replacement flexibility later	Moderate	Higher

Why it matters

A refrigerator that is even slightly too wide or too deep can prevent proper airflow, limit door opening, or keep drawers and freezer baskets from fully extending. Planning for clearances and door swing helps avoid return trips and installation surprises.

If you are replacing a refrigerator in an existing cutout

• Measure the opening in three places (top, middle, bottom)
• Confirm you have room to open doors fully and pull out the freezer drawer
• Check for a grounded, non-GFCI outlet and avoid extension cords
• If you want ice, confirm water supply availability

Last updated: January 2026