Kenmore Elite 79075503207 range Parts

On the Kenmore Elite range model 79075503207, the model and serial number plate is typically on the drawer side frame; you can see it by pulling the storage/warming drawer out. Many units also show the identification plate on the front frame when the oven door is open. See the exact location details in the 79075503207 installation guide.

• Pull out the bottom drawer and check the side frame for the serial plate.
• Open the oven door and look along the front frame/door jamb area.
• Check the inside edge of the drawer opening along the side frame.
• If your range is installed tight to a wall, avoid moving it; the drawer and door-frame locations are usually enough.

1. Turn the range controls to OFF and let surfaces cool.
2. Pull the bottom drawer straight out.
3. Use a flashlight and look for a sticker/metal plate labeled Model and Serial.
4. Write down model number, serial number, and any lot number/letter shown.

The serial plate usually includes several identifiers. Having all of them helps us match the correct Kenmore parts and diagrams.

Kenmore Elite ranges can have multiple versions within the same series. Using the exact model number (and the serial/lot info) prevents ordering the wrong oven control, burner parts, or even a simple item like an oven light.

Last updated: February 2026

To troubleshoot your Kenmore Elite range 79075503207, start by identifying whether the issue is power, gas ignition, or oven heating performance. We recommend following the diagnostic and safety steps in the 79075503207 installation guide before testing parts or accessing wiring.

• Dead display or no heat anywhere: likely power supply, cord, breaker, or terminal connection
• Surface burner won’t ignite: burner head alignment, clogged ports, or ignition issue
• Oven won’t bake or bakes unevenly: bake circuit, temperature sensing, or airflow
• Oven light doesn’t work: bulb or socket

• Confirm the range is fully plugged in and the breaker is not tripped
• For gas burners, confirm the gas shutoff valve is open
• Remove and reseat burner parts after cleaning; dry thoroughly
• If the oven is inaccurate, compare with an oven thermometer and adjust settings if available

Troubleshooting by symptom prevents unnecessary part swaps and helps you focus on the most likely failure points (heating, sensing, or power connection). On model 79075503207, accurate diagnosis also reduces the risk of electrical damage.

Last updated: March 2026

A Kenmore Elite range like model 79075503207 typically lasts 13 to 15 years with normal use and basic maintenance. Keeping burners clean, ensuring proper electrical connection, and replacing wear items (like an oven light bulb) helps you reach that lifespan.

• Heavy high-heat cooking and frequent self-clean cycles
• Power surges or loose wiring at the terminal block
• Poor airflow around the range and blocked vents
• Spills that seep under burner heads or into controls
• Delayed replacement of failing parts (sensor, bake element)

Use the care and cleaning guidance in the 79075503207 owner's manual.

• Wipe up boilovers quickly to prevent corrosion and ignition issues
• Keep burner heads seated correctly after cleaning
• Avoid slamming the oven door; it stresses hinges and seals
• Replace dim or failed oven lighting promptly
• If baking becomes inconsistent, test temperature accuracy and calibrate if your model allows

Knowing the expected lifespan helps you decide whether to repair or replace. On a 79075503207, replacing a high-failure part like a bake element or temperature sensor often restores performance for years at a much lower cost than a new range.

Last updated: March 2026