Kenmore 79046593505 electric range Parts

For the Kenmore electric range model 79046593505, the most reliable “reset” is a power reset: turn the oven controls OFF, shut off power at the breaker for 1 to 5 minutes, then restore power and set the clock. This clears many control glitches after a power interruption.

• Press CANCEL/OFF to stop any active cooking cycle.
• Verify all surface and oven controls are set to OFF.
• Turn OFF the range circuit breaker (or unplug the cord if accessible).
• Wait 1 to 5 minutes.
• Restore power; set the clock and test BAKE.

For control and safety details specific to this range, use the 79046593505 owner's manual.

This model supports an oven lockout mode. If you see “Loc” or the keypad will not respond:

• Press and hold the oven lock pad for about 3 seconds to toggle lockout.
• Wait about 15 seconds for the door lock motor to finish moving.
• Try a normal bake cycle again.

If the oven still will not heat or temperatures are inconsistent after a reset, the issue is usually a failed sensor, heating circuit, or control problem. A common part involved in temperature regulation is the frigidaire range oven temperature sensor 316217002.

The manual warns that if power fails you should turn the oven off; otherwise it may resume operation when power returns. Resetting correctly helps you restore safe, predictable operation after an outage or control glitch.

Last updated: February 2026

On Kenmore electric range model 79046593505, the model and serial number are printed on the serial plate located on the oven front frame behind the oven door; on some versions it’s behind the storage drawer. Use the exact model number when ordering parts or getting service. See the 79046593505 owner’s manual.

• Open the oven door and look along the front frame (the face frame around the oven opening)
• Check the lower front frame area where the label is easiest to read with the door open
• If you do not see it, pull out the storage drawer and look on the frame behind it
• Use a flashlight; the label can be low-contrast or partially hidden by shadows
• Write down model number, serial number, and any lot number/letter shown

We use the model number to match the correct Kenmore range parts (for example, a bake element, oven temperature sensor, or terminal block). A single digit difference can change the correct control panel, surface element, or wiring harness.

Last updated: February 2026

A Kenmore electric range like model 79046593505 typically lasts 13 to 15 years with normal household use. Lifespan depends most on heat stress to the bake/broil system, door seal condition, and keeping electrical connections tight and corrosion-free.

• Heating components: bake element and surface elements cycle on and off constantly
• Temperature control accuracy: a drifting sensor can cause overheating and extra wear
• Door sealing: heat leaks make the oven run longer to maintain temperature
• Electrical connections: loose or burned connections can damage wiring and controls
• Cleaning habits: heavy spills and harsh cleaners can shorten component life

Use the maintenance and care steps in the 79046593505 owner's manual.

• Keep the oven cavity and door edges clean so the door closes fully
• Avoid slamming the oven door; it stresses hinges and the door liner
• If baking is uneven, test temperature accuracy before increasing set temps
• If a burner cycles erratically, inspect the knob and switch operation
• Replace worn parts promptly to prevent secondary damage

If you need a frequently replaced part for this model, examples include the frigidaire range bake element 318255401 and the frigidaire range oven temperature sensor 316217002.

Knowing the typical 13 to 15 year lifespan helps you decide whether to repair (often best for a single failed element or sensor) or plan for replacement when multiple major systems start failing.

Last updated: March 2026