Frigidaire LEEFM389FEB electric range Parts

On your Frigidaire LEEFM389FEB electric range, reset error code F022 by disconnecting power for about 30 seconds, then restoring power. If F022 returns, it points to a communication problem between the oven user interface and the oven relay/control board.

What to do first (safe reset steps)

• Turn the range off.
• Shut off power at the breaker (preferred) or unplug the range.
• Wait about 30 seconds.
• Restore power.
• If the control is beeping, press CLEAR/OFF to stop the beeping and clear the display.

For control locations and the correct key sequence on your exact panel, follow the LEEFM389FEB owner’s manual.

If the code comes back after the reset

F022 is typically triggered when the control boards cannot “talk” to each other. The most common causes are a loose wiring connection, a failing control board, or a power issue that caused the electronics to glitch.

• Check for a recent power outage or breaker trip.
• If you are comfortable doing so, shut off power and inspect visible wire harness connections to the control area for looseness or heat damage.
• If the range was in or near a self-clean cycle, let it cool fully and retry the reset.
• If the code repeats, schedule service; repeated communication faults usually require diagnosis with a meter.

Quick decision guide

What you see	What it usually means	What to do
F022 clears and does not return	Temporary control glitch	Keep using the range normally
F022 returns immediately	Active communication failure	Power off, check connections, service likely
Beeping with any “F” code	Control detected a fault	Press CLEAR/OFF, record code, service if it recurs

Why it matters

When the user interface cannot communicate with the relay/control board, the range may disable heating for safety. Resetting power is the fastest way to confirm whether it was a one-time glitch or an ongoing control problem.

Last updated: January 2026

To reset the oven door lock on your Frigidaire LEEFM389FEB electric range, use the Oven Lockout feature: press and hold the lockout pad for 3 seconds to toggle it off, then wait for the “DOOR LOCKED” indicator to stop flashing and the latch to fully release. See the exact pad location in the LEEFM389FEB owner's manual.

Reset steps for the Oven Lockout feature

• Make sure the oven is idle (not baking, broiling, or running Self-Clean).
• Press and hold the Oven Lockout pad for 3 seconds.
• Watch for “LOC” to clear on the display.
• Wait while “DOOR LOCKED” flashes; it stops flashing when the door is fully unlocked.
• Open the door normally; do not force it.

If the door is locked after Self-Clean

On LEEFM389FEB, the door lock is motor-driven during Self-Clean and the door stays locked until the oven cools.

Situation	What you’ll notice	What to do
Self-Clean just ended	“DOOR LOCKED” still showing	Wait for the oven to cool; the icon turns off when unlocking is complete
You stopped Self-Clean	Cancelled cleaning but door still locked	Keep the door closed and wait for cool-down, then unlock normally
Power failure during Self-Clean	Cooktop/door may remain locked	After power is restored, press and hold the lockout pad for 3 seconds to unlock

When a part may be needed

If the lock never releases after cool-down and the lockout reset, the latch mechanism can be worn or jammed.

• Universal/multiflex (Frigidaire) range oven door latch 316405800
• Check for bent latch hardware, debris, or a door that is not closing squarely.
• If the latch motor runs but does not move the latch, replace the latch assembly.

Why it matters

The Oven Lockout feature prevents most oven functions and locks the door. Resetting it correctly protects the latch motor and helps avoid damage to the door, hinges, and lock mechanism.

Last updated: January 2026

A Frigidaire electric range like model LEEFM389FEB typically lasts 13 to 15 years with normal household use and basic maintenance. Keeping the cooktop clean, avoiding overheating, and replacing wear items promptly helps you reach that lifespan.

What affects lifespan most

• Heating element use (bake, broil, and surface elements cycle on and off constantly)
• Power quality and wiring (loose connections can overheat)
• Door seal condition (heat loss makes the oven work harder)
• Cleaning habits (spills baked onto surfaces can damage finishes and components)
• Fan and control cooling (blocked vents shorten control life)

Quick maintenance checklist

• Keep the cooktop free of baked-on spills; use the cleaning steps in the LEEFM389FEB owner's manual.
• Verify the range is level; an unlevel oven can cook unevenly and stress the door.
• Inspect the power cord connection area for heat discoloration; tighten only with power disconnected.
• Replace failed or weak heating parts early (for example, a worn range bake element 316415900).
• Check the oven door gasket for gaps or tears; replace if it no longer seals.

Common “end-of-life” symptoms and what they usually mean

Symptom	Most common cause	Typical fix
Oven heats slowly or unevenly	Weak bake element or sensor issue	Test and replace bake element or probe
Surface element not heating	Element or control issue	Test element, then control if needed
Burning smell at back	Loose terminal connection	Inspect and repair wiring/terminal block
Door won’t seal well	Worn door seal	Replace door seal

Why it matters

Knowing the typical 13 to 15 year lifespan helps you decide whether to repair or replace. On LEEFM389FEB, replacing high-wear parts like elements, door seals, and light components often restores performance for a fraction of the cost of a new range.

Last updated: March 2026