Kenmore 11047511702 washer Parts

For Kenmore washer model 11047511702, a hard reset is a power cycle: unplug the washer (or switch the breaker off) for 1 minute, then restore power. If the control is stuck in a cycle or showing a code, use the STOP and START steps in the 11047511702 owner's manual to fully cancel and restart.

Fast reset options (most common fixes)

• Power cycle reset: Unplug for 1 minute, plug back in.
• Cancel the current cycle: Press STOP twice to power down and unlock the door (it may drain first if water is hot/high).
• Restart a new cycle: Press STOP once, choose a cycle, then press and hold START for about 1 second.
• Pause and resume: Press STOP to pause; press and hold START for about 1 second to continue.
• Manual drain if needed: Choose RINSE/DRAIN & SPIN, turn 2ND RINSE off, then press and hold START.

What to expect after a reset

What you do	What the washer does	What it means
Unplug for 1 minute	Control clears minor glitches	Best for frozen buttons or odd behavior
STOP twice	Powers down; door unlocks after safe drain	Best for canceling a stuck cycle
RINSE/DRAIN & SPIN	Drains water, then unlocks	Best when the tub is full and you need access

When a “reset” does not solve it

If the washer repeatedly stops, will not drain, or keeps showing a drain-related issue, the next step is usually checking for a restriction in the drain path and cleaning the pump filter area. On this model, the drain filter assembly is commonly serviced as the filter WPW10730972.

Quick checks before replacing parts

• Verify the drain hose is not kinked or crushed
• Make sure the standpipe or sink drain is not clogged
• Reduce oversudsing (use HE detergent only)
• Run a drain and spin to confirm the pump can evacuate water

Why it matters

A true hard reset clears the control’s temporary memory and safely cancels a cycle, which prevents repeated lockups and helps you confirm whether the issue is a one-time glitch or a drain, door lock, or control problem.

Last updated: February 2026

Your Kenmore washer model number is printed on the appliance’s model and serial tag; for this washer, the model number you need for parts lookup is 11047511702. On most Kenmore washers, you’ll find that tag around the door opening (front-load) or under the lid (top-load). See the 11047511702 owner's manual for the exact tag location and labeling details.

Where to look on the washer

Check these common spots first (in order):

• Inside the door opening on the cabinet frame (front-load washers)
• Behind the door area near the hinge or latch side
• Under the lid along the rim of the tub opening (top-load washers)
• Back panel near the power cord entry or lower rear corner
• Side of the cabinet near the bottom edge

What the model number looks like (and why it matters)

Kenmore model numbers often start with 110 and are typically 11 characters or longer. Using the full model number (not just “110”) ensures we match the correct parts list, wiring, and service procedures for your exact washer.

Quick ID checklist

• Write down the full model number (example: 11047511702)
• Record the serial number too (helps with production variations)
• Take a clear photo of the tag before it fades or gets scratched

Common tag formats

What you see on the tag	What it means	What to use for parts
Model / Mod.	The washer’s model identifier	Use the full model number
Serial / S/N	Production code and date info	Keep for reference
Type	Internal platform identifier	Not usually needed

Why it matters

Kenmore washers can look similar across multiple series, but parts like the door boot, control board, and drive belt can differ by model. Using the exact model number helps prevent ordering the wrong replacement part and avoids repeat repairs.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s higher-end line, and when your Kenmore washer model 11047511702 is labeled “Elite,” it typically means you’re getting more premium features, quieter operation, and upgraded controls compared with standard Kenmore models.

What “Elite” usually means on a Kenmore washer

Kenmore Elite models are generally positioned above the base and mid-line units. In real-world terms, that often shows up as:

• More cycle options and specialty cycles (for example, a dedicated Clean Washer cycle)
• Higher spin speeds for better water extraction and shorter dry times
• More advanced electronic controls and user interface features
• Better vibration control and load balancing
• More convenience features (dispensers, door lock systems, service diagnostics)

For cycle and feature details specific to model 11047511702, use the 11047511702 owner's manual.

How to tell if it’s “high end” for your needs

“High end” depends on what you value most: cleaning performance, capacity, efficiency, noise, or repair cost. Here’s a quick way to evaluate it.

What you care about	What to look for on 11047511702	Why it matters
Faster drying	High-speed spin options	Less moisture left in clothes
Better cleaning	Longer wash actions, specialty cycles	Improves stain removal
Lower noise/vibration	Stable installation, balanced loads	Reduces walking and shaking
Long-term upkeep	Routine cleaning and maintenance	Helps prevent odors and drain issues

Why it matters

Kenmore Elite washers often include more electronics and specialized components. That can improve performance and convenience, but it also makes correct maintenance and troubleshooting more important.

Parts that commonly support “premium” features

If you’re comparing repair costs or planning maintenance, these model-specific parts are examples of higher-feature components:

• Washer user interface WP8574969 (control panel interface)
• Electronic control WPW10525353 (main control)
• Latch WPW10253483 (door lock mechanism)

Last updated: February 2026

Yes, it’s worth repairing a Kenmore washer when the fix restores reliable operation for less than about half the cost of a comparable new washer and the tub and drive system are still in good shape. For model 11047511702, start with the troubleshooting and care steps in the 11047511702 owner's manual before pricing parts.

Quick way we decide: repair vs. replace

• Repair when the failure is a common wear item (door boot, clamp, belt, hoses).
• Repair when the symptom is isolated (door leak, vibration from leveling, slow drain from a clog).
• Replace when the outer tub or spin basket is damaged and multiple major assemblies are needed.
• Replace when repeated electronic control or wiring issues keep returning.
• Repair when you can do the work safely and the parts cost stays reasonable.

Common repairs that are often worth it on model 11047511702

These are frequent front-load washer fixes that usually bring the machine back quickly:

Symptom	Likely cause area	Example part for 11047511702
Water leaking at door	Door seal or retaining clamp	Washer door boot WPW10111435, washer door boot spring clamp WP8540108
Won’t spin or slips	Drive belt	Washer drive belt WP8540101
Poor draining, odor, debris	Drain pump coin trap or pump restriction	Filter WPW10730972

What to check before spending money

• Unplug the washer; confirm the drum turns smoothly by hand.
• Look for heavy wobble, grinding noise, or rust streaks that point to bearing or tub problems.
• Confirm the washer is level; recheck the leveling legs and locking hardware.
• Follow the cleaning and troubleshooting routines in the 11047511702 owner's manual.
• Compare parts cost plus labor time against replacement cost.

Why it matters

A targeted repair (door boot, belt, or clearing the drain pump coin trap) often extends washer life for years. Replacing major assemblies (outer tub, spin basket, multiple electronics) can push total cost close to replacement.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For Kenmore model 11047511702, routine care (especially cleaning and periodic checks) helps you reach the longer end of that range; heavy loads, poor leveling, and neglected maintenance shorten it.

Typical lifespan and what affects it

Most washers land in the same general window, but real-world life depends on use and upkeep.

• Loads per week: more cycles equals more wear on bearings, motor, and suspension
• Overloading: strains the drive system and increases vibration
• Leveling: an unlevel washer can shake, walk, and wear parts faster
• Water quality: sediment can affect valves and internal flow paths
• Maintenance habits: cleaning and hose checks reduce leaks and odor issues

Maintenance that extends life (high impact)

Your Kenmore 11047511702 manual includes a dedicated Washer care section (cleaning, inlet hoses, storage/moving care). Use it as your baseline: 11047511702 owner's manual.

• Clean the washer regularly (tub, door area, and dispenser areas)
• Inspect water inlet hoses periodically; replace if bulging, cracking, or leaking
• Keep the washer level and re-check after moving it
• Use the correct detergent type and amount to reduce residue buildup
• Leave the door slightly open between loads to help the interior dry

Parts that commonly wear during a washer’s life

The manual notes that some items are considered normal wear items (for example, filters and belts). These are often the first things to address when performance drops.

Wear item	What you may notice	Example part for this model
Drain/pump filter	Slow draining, debris issues	Filter WPW10730972
Drive belt	Slipping, poor spin, burning rubber smell	Washer drive belt WP8540101
Door boot (gasket)	Leaks at the door, mildew odor	Washer door boot WPW10111435

Why it matters

Knowing the 10 to 15 year lifespan helps you decide whether to maintain and replace wear parts (belt, filter, door boot) or plan for a replacement when major components like the tub, motor, or controls start failing.

Last updated: February 2026