Kenmore 41748112701 washer Parts

For Kenmore washer model 41748112701, the model number is printed on the washer serial plate at the top, inside the door opening. Once you record that full model number, we can match the correct parts list, diagrams, and repair parts for your exact washer.

Where to look on model 41748112701

On this Kenmore front-load washer, check these spots first:

• Open the washer door and look along the top edge of the door opening
• Find the serial plate (sticker or metal plate) with Model and Serial fields
• Write the model number exactly as shown (all digits, no spaces)
• Record the serial number too; it helps confirm production details
• Keep the info with your paperwork or in your phone notes

For a visual reference and the exact wording used for the serial plate location, use the 41748112701 owner's manual.

What the model number should look like

Kenmore washer model numbers are typically a long string of numbers (and sometimes a prefix on other Kenmore lines). For this unit, the model is all digits.

What you see	What it means	What to do next
41748112701	Full model number	Use it to select exact parts
Serial number	Unit-specific identifier	Keep it for service records
Partial/blurred label	Missing characters	Clean label and re-check

Tips if the label is hard to read

• Wipe the plate gently with a damp cloth and mild soap; dry it fully
• Use a flashlight at an angle to reduce glare
• Take a close-up photo and zoom in
• Avoid abrasive cleaners; they can remove printed characters

Why it matters

Kenmore washers often have multiple versions that look similar, but use different door lock switches, control boards, or water valves. Using the exact model number helps prevent ordering the wrong replacement part and saves time on troubleshooting.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable operation for less than the cost of replacement, especially on a solid, well-installed machine like model 41748112701. We focus first on the failure type (drain, door lock, vibration, or controls) and the expected longevity of the repair.

Quick way we decide: repair vs replace

• Repair when the washer is otherwise in good shape and the problem is isolated (won’t drain, won’t start, won’t lock).
• Repair when the fix is a common wear item and parts are available.
• Replace when multiple major systems are failing (leaks plus no-spin plus electrical issues).
• Replace when the outer tub is damaged or the repair requires extensive teardown.
• Repair when you can correct installation issues (leveling, flooring) that cause symptoms.

Common repairs on Kenmore 41748112701 that are often worth it

These are frequent, targeted fixes that typically restore normal washing and spinning:

• Door won’t lock or cycle won’t start: door lock switch 131763256
• Water won’t drain or drains slowly: washer drain pump 137221600
• Excessive shaking or banging: shock absorber 5304485917
• Door boot leaks or smells (seal issues): bellows 134515300

Cost and complexity snapshot

Problem area	Typical symptom	Typical repair effort
Drain system	Standing water, slow drain	Low to medium
Door lock	Won’t start, door won’t unlock	Low
Suspension	Loud vibration, walking	Medium
Controls	Dead panel, erratic behavior	Medium to high

Why it matters

A correct diagnosis prevents repeat failures and wasted parts. The safety guidance for this washer also matters: we disconnect power before service, use a properly grounded 3-prong outlet, and avoid extension cords or adapters. For model-specific operating and care guidance, use the 41748112701 owner's manual.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 41748112701 front-load washer, consistent care (using HE detergent, avoiding overloads, and keeping the door seal clean) helps you reach the longer end of that range; neglected maintenance shortens it.

What affects lifespan the most

• Load size and balance: frequent overloading strains the motor, shocks, and tub bearings.
• Detergent choice: use low-sudsing, high-efficiency (HE) detergent to reduce oversudsing and residue.
• Moisture control: wiping the door boot and leaving the door ajar helps prevent odor and seal wear.
• Drain health: slow draining forces the pump to work harder and can lead to failures.
• Vibration control: excessive shaking accelerates wear on suspension components.

Quick maintenance checklist (best ROI)

• Use the detergent type and amounts listed in the 41748112701 owner's manual.
• Run a monthly cleaning cycle (or hot wash) with an empty drum.
• Check pockets and remove coins, screws, and debris before washing.
• Keep the washer level; re-level if it starts walking or banging.
• Inspect hoses for bulges or leaks and replace if worn.

Common wear items and what they usually look like when failing

Symptom	Likely wear area	What you may notice
Door won’t lock or cycle won’t start	Door lock system	Clicking, intermittent start, door stays unlocked
Water won’t drain or drains slowly	Drain pump / drain path	Standing water, long drain times, wet loads
Excessive shaking or banging	Suspension	Thumping on spin, tub movement, out-of-balance behavior

If you’re seeing door-lock or drain symptoms, the model-specific parts most often involved are the door lock switch 131763256 and the washer drain pump 137221600.

Why it matters

A washer that is maintained and repaired early usually avoids secondary damage (like motor strain, leaks, or repeated out-of-balance spins). That keeps your Kenmore 41748112701 running closer to its full expected service life.

Last updated: February 2026