Kenmore 25352649305 refrigerator Parts

Your Kenmore side-by-side refrigerator model 25352649305 has its exact cubic-foot capacity listed on the model and serial (rating) plate inside the fresh food compartment, and it may also be shown in the specifications section of the 25352649305 owner's manual. Use those two sources for the most accurate number for your exact configuration.

Check these spots first (fastest to most detailed):

• Rating plate inside the refrigerator compartment: this is the most reliable place for the official capacity.
• Specifications section in the manual: look for “capacity” or “total volume” in cubic feet.
• Product label wording: some versions list separate fresh food and freezer volumes.
• Parts list context: helpful for identifying the exact model, but it typically does not list cubic feet.

1. Open the fresh food (refrigerator) door.
2. Locate the serial plate inside the refrigerator compartment.
3. Write down the model number and serial number.
4. In the 25352649305 owner's manual, check the specs section for cu. ft. capacity.

If you need a planning estimate (cabinet fit, moving, storage planning), most Kenmore side-by-side refrigerators of this style commonly fall in this range:

Cubic-foot capacity helps us match the right shelves, bins, and airflow expectations for your refrigerator. It also helps when comparing storage space after replacing door bins, crisper pans, or other interior components.

If you are also tracking water and ice performance, the manual notes the filter system details and replacement interval; for filter selection and change steps, we recommend how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 25352649305, the model number is printed on the serial plate inside the refrigerator (fresh food) compartment. We recommend recording both the model and serial number for parts lookup and service reference; see the owner's manual.

• Open the fresh food (refrigerator) door, not the freezer door
• Look along the inside walls near the front opening
• Check around the upper interior area and side wall areas where labels are commonly placed
• Find the serial plate or rating label (it lists model and serial)
• Write the model number exactly as shown (for this unit it starts with 253)

Using the correct model number prevents ordering the wrong Kenmore parts such as a refrigerator water filter, door gasket, or evaporator fan components. Even small model-number differences can change the correct part ID.

If you are looking up common maintenance items for this model, these are frequently searched:

• Genuine Kenmore refrigerator water filter WF2CB (replacement filter used for the dispenser/ice system)
• Refrigerator gasket 241786014 (freezer door gasket)
• Refrigerator evaporator fan blade 5308000010 (airflow inside the cabinet)

For additional parts searches by model number, use the parts list for 25352649305 or search by model on Sears PartsDirect.

Last updated: February 2026

Yes. We still carry replacement parts for Kenmore refrigerators, including model 25352649305. You can match parts by model number and then choose the exact component you need, such as a water filter, door gasket, ice maker parts, or dispenser components.

Use your model number (25352649305) to ensure fit. Then confirm the part by comparing the part name, diagrams, and your refrigerator’s symptom.

• Start with the parts list for your exact model
• Verify the part by location (fresh food section, freezer door, dispenser area)
• Check for common wear items first (filters, gaskets, bulbs)
• Use the instructions in the 25352649305 owner's manual for maintenance and operating details
• Order directly from the model parts list, or search by model on Sears PartsDirect

These are examples of parts available for this model that often solve everyday issues:

• Water quality or slow dispensing: genuine Kenmore refrigerator water filter WF2CB (replacement cartridge 9911)
• Warm temperatures or frost issues: refrigerator defrost bi-metal thermostat 5303918214
• Door not sealing, moisture, or frost buildup: refrigerator gasket 241786014
• Dim or burned-out interior light: appliance light bulb, 40-watt 316538904

Using the correct model-matched part helps restore proper cooling, prevents air leaks that waste energy, and keeps your ice and water system working reliably. For example, the manual recommends changing the water filter about every 6 to 9 months (or around 400 gallons) to maintain water quality.

Last updated: February 2026

The most common issues we see with the Kenmore 25352649305 side-by-side refrigerator are ice maker and dispenser jams, weak cooling from airflow or dirty condenser conditions, water leaks, and frost buildup tied to the defrost system or door sealing. Your owner's manual also lists several quick checks that solve many “no cool” and “runs too long” complaints.

• Ice maker or ice dispenser not working or jammed: Ice can melt and refreeze into clumps after a power outage or low use; remove the bin and shake cubes loose (do not use sharp tools).
• Refrigerator not cooling well or running too long: Check that controls are not set to OFF (“0”), doors are closing fully, and the condenser is clean.
• Water leaking or puddles: Look for a loose water line connection, a cracked reservoir, or a door left slightly open causing excess frost and meltwater.
• Noisy operation: Fan noise often points to airflow issues or ice buildup; compressor run time increases when doors are opened frequently.
• Water dispenser problems (slow flow, bad taste): A clogged filter is a top cause; replace the genuine Kenmore refrigerator water filter WF2CB on schedule.
• Frost buildup: Commonly caused by warm air leaks at the door gasket or a defrost problem.

These are frequently replaced items for this model when symptoms match:

• Genuine Kenmore refrigerator water filter WF2CB (clogs cause slow water and poor taste)
• Refrigerator defrost bi-metal thermostat 5303918214 (defrost-related frost and warm temps)
• Refrigerator gasket 241786014 (air leaks cause frost and long run times)
• Refrigerator evaporator fan blade 5308000010 (airflow and noise symptoms)

Most “not cooling” and “ice/water problems” trace back to airflow, door sealing, or filtration. Fixing those early helps prevent long compressor run times, temperature swings, and recurring frost that can block vents.

For ordering model-matched replacement parts, use the parts list for Kenmore 25352649305, or search by model on Sears PartsDirect.

Last updated: February 2026

To replace the ice maker in your Kenmore 25352649305 side-by-side refrigerator, we shut off power, remove the ice bin, disconnect the ice maker wiring and fill tube connection, swap in the new unit, then restore power and water and turn the ice maker back on.

• Unplug the refrigerator or switch off the breaker.
• Turn off the household water supply shutoff valve.
• Lift the wire signal arm to the up/OFF position.
• Have a Phillips screwdriver and a nut driver or socket set ready.
• Keep towels handy for small water drips.

For model-specific access and diagrams, use the 25352649305 owner's manual.

• Remove the ice container by lifting up and out.
• Remove the ice maker cover (if equipped) and mounting screws.
• Unplug the ice maker wire harness/connector.
• Disconnect the water fill tube or inlet connection at the ice maker.
• Transfer any identical parts from the old unit (wire signal arm, cover, bracket) to the replacement.
• Mount the new ice maker, reconnect the fill tube and wiring, then reinstall the bin.

1. Turn the water supply back on and check all connections for leaks.
2. Reconnect power.
3. Lower the wire signal arm to the down/ON position.
4. Discard the first batch of ice; early cubes can be discolored or taste odd after plumbing is disturbed.

A secure mount and leak-free water connection prevents water damage and helps the ice maker cycle normally for consistent cube production.

Last updated: February 2026