How to find model number on Frigidaire gas range?
On the Frigidaire gas range model FGGF3054MFD, the model and serial number are on the identification plate on the right-hand surface of the oven front frame. You can access it by opening the storage drawer, warmer drawer, or broiler drawer (depending on your configuration); see the installation guide.
- Pull out and open the storage drawer (common on many ranges)
- If your range has one, open the warmer drawer
- If your range has one, open the broiler drawer
- Look at the right-hand side of the oven front frame for the identification plate
- Take a clear photo of the plate so you have it when ordering parts or scheduling service
Record these exactly as shown on the identification plate:
- Model number (FGGF3054MFD)
- Serial number
- Lot number or letter (often needed for parts lookups)
We use the model and serial information to match the correct Frigidaire parts and specifications for your exact build. The identification plate can also list burner ratings, fuel type, and the gas pressure setting the range was adjusted for at the factory.
| Item on tag | What it’s used for |
|---|---|
| Model number | Ensures parts diagrams and replacements match your range |
| Serial number | Identifies production run and configuration |
| Lot number/letter | Helps narrow down correct part variations |
Last updated: February 2026
Can I look up Frigidaire parts by model number?
Yes. Looking up parts by model number is the most accurate way to get compatible replacement parts for your Frigidaire gas range model FGGF3054MFD because it filters results to the exact burner, oven, and control components used on that range.
For this Frigidaire range, the identification plate is on the right-hand surface of the oven front frame. Open the storage drawer, warmer drawer, or broiler drawer (depending on your configuration) to access it; then record the model and serial numbers.
- Open the drawer and locate the identification plate on the oven front frame
- Write down the full model number (FGGF3054MFD) and the serial number
- Also note any lot number or letter shown on the plate (helpful for parts matching)
- Use that exact model number when searching for parts
- Confirm the part description matches the symptom you are fixing
Reference: FGGF3054MFD owner’s manual
Searching by model number helps you quickly narrow to common repair parts for ignition, heating, and temperature control.
| Common symptom | Likely part category | Example part for this model |
|---|---|---|
| Oven will not heat or takes too long to ignite | Oven igniter | Tappan range oven burner igniter 316489403 |
| Oven temperature is inaccurate | Temperature sensor | Frigidaire range oven temperature sensor 316490000 |
| Cooktop burner will not spark/ignite | Ignition system | Range spark module 5304508269 |
Model-number lookup prevents ordering a part that looks similar but mounts differently, uses a different connector, or is calibrated differently (common with igniters, sensors, and spark modules). That saves time and avoids repeat repairs.
Last updated: February 2026
What are the parts of a gas stove?
A gas stove (gas range) like the Frigidaire FGGF3054MFD is made up of surface cooking parts (burners, caps, grates, knobs, igniters) plus an oven system (bake/broil burner and igniter, temperature sensing, racks, door components) and controls that manage ignition and heat.
These are the components you handle most often:
- Burner grates (support cookware)
- Burner caps (must match the burner head size and sit correctly)
- Burner heads (secured to the cooktop and cleaned in place)
- Surface burner igniters (spark to light the gas)
- Control knobs and valves (regulate gas flow and flame size)
The installation instructions for this model emphasize correct burner cap and grate placement for proper ignition and flame size; the cooktop is not designed to be removed. See the FGGF3054MFD installation guide.
Inside the oven, these parts create and control heat:
- Bake burner and bake igniter (lights the bake flame)
- Broil igniter (lights the broil flame)
- Oven temperature sensor (helps the control maintain set temperature)
- Oven racks (hold cookware at different positions)
- Convection components (fan motor, fan cover, convection element on convection models)
| What it does | Example part for FGGF3054MFD | When it’s often needed |
|---|---|---|
| Lights the bake burner | Tappan range oven burner igniter 316489403 | No bake ignition, long preheat |
| Senses oven temperature | Frigidaire range oven temperature sensor 316490000 | Oven temp inaccurate, uneven baking |
| Provides oven light | Appliance light bulb, 40-watt 316538904 | Oven light out |
Knowing the major gas range parts helps you troubleshoot faster. For example, a weak or failed igniter can prevent the oven from lighting, while mis-seated burner caps can cause poor surface burner ignition and uneven flames.
- Keep burner caps and heads in place during use; do not let spills enter orifice openings.
- Do not obstruct oven venting or airflow around the range.
- Do not try to operate the electric ignition oven during a power failure; reset controls to OFF.
Last updated: February 2026




