View engine
Is it worth replacing a lawn mower engine?
Yes, it’s worth replacing the engine on your Craftsman 917252450 front-engine lawn tractor when the tractor’s chassis, mower deck, steering, and drive system are still solid and the total engine swap cost stays well below the cost of replacing the entire tractor. If the tractor also needs major deck or drive repairs, replacement usually makes more sense.
- The deck shell is not rusted through and the spindles turn smoothly.
- The transmission and ground drive work without slipping.
- Steering is tight enough to mow safely (no severe play).
- You can do the labor yourself or the labor cost is reasonable.
- The engine replacement cost is clearly less than buying a comparable new tractor.
Engine swaps are a bigger project than most mower repairs because you may also need to transfer pulleys, wiring, throttle/choke controls, and exhaust parts.
| Option | Typical best use | What you gain | What to watch for |
|---|---|---|---|
| Replace engine | Tractor is in good overall condition | Fresh start, often a warranty | Fitment, wiring, pulley alignment |
| Repair existing engine | Minor issue (fuel, ignition, carb) | Lowest cost | Can turn into repeated repairs |
| Replace tractor | Multiple major systems worn | New machine, less downtime | Higher upfront cost |
Many “bad engine” symptoms are actually fuel, battery, or safety switch issues.
- Verify battery charge and cable connections.
- Check for fresh fuel and a clean air filter.
- Confirm the brake and seat safety interlocks are working.
- If it cranks but will not fire, check spark and fuel delivery.
A good starting point is riding lawn mower engine spins but wont start video.
An engine replacement can be a smart investment on a Craftsman tractor like model 917252450 because the deck, steering, and drive components often outlast the engine. If those systems are already worn, you can end up paying twice: once for the engine and again for belts, pulleys, or deck parts.
If you’re already seeing deck vibration or belt issues, inspect wear items like the v-belt 532138255 and idler components before deciding.
Last updated: January 2026
How much does it cost to replace a riding lawn mower engine?
For a Craftsman riding lawn tractor like model 917252450, a typical engine replacement (parts plus labor) runs about $260 to $1,800 installed, with labor commonly around 6 hours depending on the shop rate and how much teardown is required.
- Engine type and horsepower (OEM-style replacement vs. aftermarket)
- Labor rate at the repair shop (hourly rates vary widely)
- Extra parts needed during the swap (belts, pulleys, hardware)
- Condition of the tractor (rusted fasteners, worn wiring, damaged mounts)
- Pickup/delivery fees if the tractor is transported
Even when the engine is the main issue, we often see related wear items replaced at the same time to prevent repeat problems.
- Ground drive belt: v-belt 532138255
- Deck/drive belt option (if equipped and worn): lawn mower v-belt 532419271
- If the engine pulley is damaged or seized: engine pulley 532140186
- If the key is worn or intermittently failing: molded ignition key 532140403
| Cost item | Typical range | Notes |
|---|---|---|
| Replacement engine | $200 to $1,400 | Biggest variable; depends on brand/specs |
| Labor (riding mower) | $300 to $900 | Often ~6 hours total |
| Misc. parts/fluids | $20 to $200 | Belts, hardware, oil, filter |
| Transport (optional) | $0 to $200+ | If you cannot trailer it |
An engine swap is one of the highest-cost repairs on a riding mower. If the tractor also needs deck work (mandrel, pulleys, belts) or steering/brake repairs, the total can approach the cost of replacing the machine.
If the engine is only clicking or cranking but not starting, confirm it is truly an engine failure before buying a replacement; riding lawn mower engine spins but wont start video and riding lawn mower engine clicks but doesnt turn over video help narrow down battery, starter, and fuel issues.
Last updated: January 2026
What engine does Craftsman riding mower use?
Craftsman riding mower model 917252450 uses a gasoline engine; the exact engine manufacturer and specifications are identified on the engine ID label mounted on the engine itself. Use that label to match tune-up and repair parts to your specific engine.
Find the engine identification label, then write down the full set of numbers exactly as shown.
- Check the blower housing (recoil starter shroud) first
- Also check the valve cover, near the starter, or near the muffler
- Record the engine model and spec/type code (not just horsepower)
- Record the serial number and any emissions family code
- Use those numbers when ordering engine parts (air filter, spark plug, carburetor, starter)
| Common engine brand on riding mowers | Label fields you will see | What you use them for |
|---|---|---|
| Briggs & Stratton | Model, Type, Code | Correct carburetor, ignition, and tune-up parts |
| Kohler | Model, Spec, Serial | Correct fuel system and electrical parts |
The tractor model number 917252450 identifies the chassis and mower deck, but engine service parts must match the engine model and spec from the ID label. That prevents ordering the wrong carburetor, air filter, or ignition components.
These parts are on the tractor and commonly checked during no-start or intermittent-start complaints:
- Worn or damaged key: molded ignition key 532140403
- Restricted exhaust or physical damage: muffler 532137348
- If the engine runs but the tractor will not move (drive issue, not engine): v-belt 532138255
Last updated: January 2026
