Kenmore 25378882010 refrigerator Parts

You can tell the age of your Kenmore refrigerator by decoding the serial number; the date code is typically in the first characters and indicates the month and year of manufacture. For Kenmore model 25378882010, use the serial-number format and label details in the owner's manual.

Look for a white or silver rating label in these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the frame behind the crisper drawers
• Along the door jamb (hinge side) when the door is open
• On the back exterior panel near the compressor area

Kenmore refrigerators were built by different manufacturers over the years, so the serial format varies. Use this process to get an accurate manufacture date:

• Write down the full serial number exactly (letters and numbers)
• Confirm the model number (yours starts with 253, which helps identify the manufacturing family)
• Identify the date-code section (often at the beginning of the serial)
• Match that section to the date chart in your documentation

Knowing the manufacture date helps you order the correct replacement parts and plan maintenance. For example, door seals and interior storage parts are common wear items on top-mount refrigerators.

• Door gasket
• Ice maker components
• Light bulb type
• Crisper drawer and supports

If you are troubleshooting cooling or frost issues on this top-mount unit, checking defrost components is a common next step; see the installation guide for leveling and door-seal basics that affect temperature performance.

Last updated: February 2026

Common problems we see with the Kenmore 25378882010 top-mount refrigerator include weak or no cooling, frost buildup from defrost-system issues, water leaks, door sealing problems, and ice maker troubles. Start by confirming the refrigerator is level and has proper airflow clearances listed in the installation guide.

• Not cooling or warm temperatures: airflow problem (blocked vents), dirty condenser area, failed fan motor, or sealed-system/compressor issue
• Freezer cold but fresh food warm: evaporator airflow issue (fan, frost blockage, damper/air passages)
• Frost buildup on back wall or evaporator cover: defrost heater or defrost thermostat problem
• Puddles or water under the unit: clogged/iced drain, water line connection leak, or ice maker fill issue
• Doors not closing or gaps in the seal: unit not leveled correctly, hinge wear, or torn gasket
• Ice maker not making ice or overfilling: water supply/pressure issue, fill cup problem, or ice maker component failure

• Verify clearances for airflow: 3/8 inch at sides and top, 1 inch at rear.
• Confirm the refrigerator is tilted about 1/4 inch front-to-back so doors close and seal.
• Make sure the toe grille is not blocked.
• If connected to water, confirm supply pressure is 30 to 100 psi and recheck for leaks after 24 hours.
• Avoid using an extension cord or adapter plug.

Cooling and ice maker complaints often trace back to airflow, leveling, and defrost performance. When the cabinet is not level or airflow is restricted, temperatures swing, doors leak cold air, and frost can build up, which makes the compressor run longer and food spoil faster.

Last updated: February 2026

The exact cubic-foot capacity for Kenmore model 25378882010 is listed on the model’s rating label and in the capacity/specifications section of the owner's manual. For most Kenmore 253-series top-mount refrigerators, total capacity commonly falls in the 18 to 22 cu. ft. range.

• Check the rating label inside the fresh food compartment (often on a side wall near the crisper area).
• Look in the specifications section of the owner's manual.
• If the label is hard to read, take a clear photo and zoom in; the capacity is usually shown as “Total capacity” in cubic feet.

Model numbers can hint at series and configuration, but they do not reliably encode the exact cubic-foot capacity across all Kenmore 253 models.

Capacity affects shelf and bin fit, food storage planning, and even how you compare replacement parts like door bins, crisper components, and gaskets for your specific cabinet size.

Last updated: February 2026

Kenmore is a brand name, and model 25378882010 is part of Kenmore’s 253-prefix refrigerator family, which is manufactured for Kenmore by Frigidaire (Electrolux). You can confirm the model identification details and installation requirements in the installation guide.

Kenmore model numbers often indicate the original manufacturer by the first three digits (the prefix).

• 253 prefix: built for Kenmore by Frigidaire (Electrolux)
• The remaining digits identify the specific design, features, and production run
• This matters when matching parts like door gaskets, crisper drawers, and ice maker components

Knowing the manufacturer behind the Kenmore badge helps you get the right replacement parts the first time, especially for fit-critical items.

Common examples for this model include:

• Door sealing parts such as a refrigerator gasket 242193213
• Storage components such as a crisper drawer - refrigerator storage component by frigidaire 240337103
• Cooling system service parts (used by technicians) such as a filter drier 5303305677

• Match the full model number exactly: 25378882010
• Compare the part name and part ID, not just a similar-looking photo
• If your refrigerator has a color-specific part (handles, doors, gaskets), match the color description carefully
• Use the diagrams for your model to confirm mounting points and hardware

Last updated: February 2026