KitchenAid KSSC48QVS03 48" built-in refrigerator Parts

The KitchenAid KSSC48QVS03 is a 48-inch built-in side-by-side refrigerator. “48-inch” refers to the cabinet width class; for the exact cutout, door-swing clearance, and installed dimensions for your specific installation, use the measurements listed in the installation guide.

This model is designed to fit a built-in opening and typically installs flush with surrounding cabinetry when the cutout and panels are built to spec.

• Nominal width: 48 inches (model class)
• Configuration: side-by-side (refrigerator on one side, freezer on the other)
• Installation-sensitive sizing: final dimensions depend on trim, panels, and clearances
• Door swing matters: you need room for doors to open fully without hitting walls or cabinets

We recommend verifying these in the installation guide before cabinetry work, delivery, or service access planning:

• Minimum cutout width, height, and depth
• Top grille and trim requirements
• Door swing clearance and handle projection
• Space for water line and electrical connection
• Service access clearance (so the refrigerator can be pulled for repair)

Built-in refrigerators like the KSSC48QVS03 are “top heavy” during installation and are designed around a precise cutout; correct sizing helps prevent tip risk during install and avoids door, trim, and panel fit problems.

Last updated: February 2026

For the KitchenAid KSSC48QVS03 48 inch built-in refrigerator, the model number is printed on the appliance’s rating label. On built-in side-by-side units like this, the label is most often inside the fresh food compartment along the cabinet wall near the top, or around the door frame.

Check these common rating-label locations:

• Inside the refrigerator section on the left or right side wall
• Along the fresh food door frame (open the door and look around the perimeter)
• Near the top hinge area (visible with the door open)
• Behind the toe grille or lower kickplate on some built-in installations

Use the location diagrams in the KSSC48QVS03 owner’s manual if you want the exact label placement for your configuration.

Record the full identification information exactly as shown:

• Model number (KSSC48QVS03)
• Serial number
• Any revision, type, or engineering code listed

KitchenAid built-in refrigerators often have mid-production part changes. Using the complete model and serial information helps us match the correct components the first time, such as the refrigerator water filter EDR3RXD1 or electronic controls.

Last updated: March 2026

The average lifespan of the KitchenAid KSSC48QVS03 48 inch built-in refrigerator is 15 to 20 years. Built-in side-by-side refrigerators typically last longer than freestanding models because they use heavier-duty components and are often installed in more stable environments.

These factors have the biggest impact on how long your KSSC48QVS03 runs reliably:

• Condenser coil cleanliness (dust buildup raises compressor temperatures)
• Door seal condition (air leaks increase run time and frost)
• Proper airflow around the machine compartment (especially in built-ins)
• Water quality and filter changes (protects the valve and dispenser flow)
• Stable temperatures and not overpacking (helps airflow and evaporator performance)

For model-specific care and cleaning steps, follow the KSSC48QVS03 installation guide and any maintenance notes it includes for built-in ventilation and clearances.

Most “end of life” refrigerator failures are heat and airflow related. Keeping the condenser area clean and the doors sealing well reduces compressor strain and helps the control system maintain stable temperatures.

Last updated: March 2026