Kenmore 59675519400 refrigerator Parts

For Kenmore refrigerator model 59675519400, the fastest way to identify the correct water filter is to use the full model number from the ID tag inside the fresh food compartment, then match it in the parts list or the filter section of the 59675519400 owner's manual. This prevents buying a filter that will not fit or seal.

Step-by-step: identify the right filter

• Find the model/serial tag inside the refrigerator (usually on a side wall or near the crisper area).
• Confirm the model number is 59675519400 (use all digits).
• Check the filter location on your unit (inside fresh food compartment, base grille, or rear housing).
• Look up the filter by model number in the parts list or manual.
• If your refrigerator has low water flow, verify your home water pressure before blaming the filter.

Water pressure and filter performance (important for this model)

This Kenmore refrigerator is designed to run with 35 to 100 PSI water pressure; 35 PSI minimum is recommended for refrigerators with water filters. Low pressure can cause slow dispensing and poor ice production.

What you notice	Common cause	What to do next
Slow water at dispenser	Low supply pressure or restricted line	Confirm shutoff valve is fully open; check for kinks
Hollow or small ice cubes	Low pressure (including some RO systems)	Verify pressure is in range; consider RO tank/booster setup
Leaks after changing filter	Filter not fully seated or damaged seal	Reinstall filter firmly; inspect O-rings and housing

Quick checks before you buy a replacement filter

• Make sure the old filter is fully removed (some styles twist and pull).
• Inspect the filter head for cracks or debris.
• If you recently installed a saddle valve, replace it with a proper shutoff valve (saddle valves can restrict flow).
• After any water-line work, monitor for leaks for several hours.

Why it matters

Using the correct filter for 59675519400 protects the filter housing seal, helps maintain proper water flow, and reduces the chance of leaks or weak ice production caused by restriction or low pressure.

Last updated: January 2026

On Kenmore refrigerator model 59675519400, the bottom area is commonly called the machine compartment (or compressor compartment). It houses key cooling components like the compressor and condenser area, and it often sits behind a lower rear cover and above a drain pan.

What you will find in the bottom area

The machine compartment is where the refrigerator rejects heat and powers the sealed cooling system.

• Compressor (the pump that moves refrigerant)
• Condenser coil area (releases heat)
• Condenser fan area (on many models)
• Electrical start components and wiring
• Drain pan (catches defrost water for evaporation)

For model-specific cabinet clearances and access notes, use the 59675519400 owner's manual.

Common names you may hear (and what they mean)

Term people use	What it usually refers to	Where it is
Machine compartment	Compressor and condenser area	Bottom rear
Toe grille / kick plate	Front lower trim panel	Bottom front
Drain pan	Pan that collects defrost water	Under or near compressor
Rear cover	Panel that protects airflow and components	Bottom rear

Why it matters

Knowing the correct name helps when ordering parts, following troubleshooting steps, or checking airflow clearance. For example, the manual calls out leaving space behind the machine compartment cover for proper air circulation.

Parts in this model that relate to the bottom compartment

If you are diagnosing a no-cool or clicking issue, these model-matched parts are commonly involved:

• Refrigerator compressor W10160407
• Refrigerator overload release W10613606

Last updated: January 2026

For Kenmore refrigerator model 59675519400, the cost to replace a shelf depends on the exact shelf assembly you need (glass shelf, slide-out shelf, or a frame/rail). We price it by the specific part number; once you identify the correct shelf part, you can see the exact current price.

How to get the exact shelf price for your 59675519400

Use the model’s parts diagram to identify the shelf by location (upper fresh food shelf, crisper cover, door bin, etc.), then match the part number to the listing.

• Find the shelf section in the diagrams (fresh food shelves, crisper area, or door storage)
• Match the shelf style and trim color to the diagram callout
• Confirm whether you need the full shelf or only a support/rail
• Use the part number to check the current price and availability
• Compare the cost of a complete assembly vs. individual pieces

For shelf removal and reinstallation steps (including spillproof shelf handling and crisper top removal), follow the 59675519400 owner’s manual.

Typical price drivers (what changes the cost)

What you’re replacing	What usually costs more	What usually costs less
Fresh food shelf area	Full glass shelf assemblies, slide-out designs	Shelf supports, end caps, small trim pieces
Crisper cover area	Frame assemblies and specialty glass	Individual rails or small mounting parts
Door storage	Large bins with trim	Small retainers and stops

A model-matched example part (not a shelf)

If you are actually replacing the crisper cover frame component (not the glass shelf itself), one related model-matched part is the refrigerator crisper drawer shelf frame WP67003854.

Why it matters

Using the correct shelf part for Kenmore model 59675519400 keeps airflow and storage stable. A mismatched shelf can sit unevenly, crack again, or interfere with door closing and temperature consistency.

Last updated: January 2026