Kenmore 66513469K902 undercounter dishwasher Parts

Yes. We still support parts for many Kenmore dishwashers, including model 66513469K902; the key is matching parts by the full model number so you get the correct fit for items like the drain pump, water inlet valve, door seal, or heating element.

How to make sure you order the right part

Use the model number 66513469K902 and confirm the part’s location and connections in the 66513469K902 owner’s manual.

Before ordering, we recommend:

• Match the full model number exactly: 66513469K902
• Identify the symptom (no drain, leak, not drying, not filling)
• Compare the part name and part ID, not just a description
• Check whether your dishwasher uses a drain air gap or high loop setup
• Verify mounting style and hose routing during installation

Common Kenmore dishwasher parts customers replace

These are frequently replaced on this model when symptoms point to them:

• Dishwasher drain pump WPW10348269 for standing water or no-drain issues
• Dishwasher water inlet valve W10648041 for no-fill or slow-fill problems
• Dishwasher door seal W10542314 for leaks at the door
• Dishwasher heating element W10518394 for poor drying or cool water
• Fuse W10258275 for a dishwasher that appears completely dead

Quick symptom-to-part guide

Symptom	What to check first	Related part example
Won’t drain	Kinked hose, clogged path, pump	Drain pump, drain hose
Won’t fill	Water supply, inlet screen, valve	Water inlet valve
Leaks at door	Seal seating, debris, alignment	Door seal
Dishes not dry	Heat circuit, venting, rinse aid	Heating element, vent parts

Why it matters

Kenmore dishwashers are built for long service life, and many repairs are part replacements rather than full unit replacement. Using the exact model number and the manual’s diagrams helps prevent ordering a similar-looking part that will not mount, seal, or wire correctly.

Last updated: February 2026

Your Kenmore dishwasher’s identity is its model number. For Kenmore model 66513469K902, the model/serial tag is typically inside the door opening on the inner door frame or along the tub edge; match that number exactly when ordering parts or troubleshooting using the 66513469K902 owner’s manual.

Where to look for the model number tag

Check these common locations first (in order):

• Inside the door opening on the left or right inner door frame
• Along the top edge of the door opening
• On the tub wall just inside the door
• On the side of the door itself (visible when the door is open)
• If the unit was recently installed, confirm the installation details in the 66513469K902 installation guide

What the model number looks like (and why it matters)

Kenmore dishwashers often use a long model format that starts with 665. You want the full model number, not just the first three digits.

What you find	Example	Use it for
Model number	66513469K902	Correct parts lookup, diagrams, troubleshooting
Serial number	(letters and numbers)	Production info, service identification
Brand name	Kenmore	General compatibility only (not enough for parts)

Quick tips to avoid ordering the wrong part

• Write the model number exactly as shown (including all digits and letters)
• Take a clear photo of the tag before you start a repair
• Use the model number to confirm fit before buying common repair items like a heating element, drain pump, or door seal
• If you’re diagnosing a no-heat or poor-drying issue, confirm the correct heater for your model, such as the dishwasher heating element W10518394

Why it matters

Kenmore dishwashers share similar styling across many years, but internal components (control board, pump motor, drain hose routing, door seal profile) can vary by model revision. Using 66513469K902 ensures the part you choose matches the electrical connectors, mounting points, and tub configuration.

Last updated: February 2026

A Kenmore undercounter dishwasher like model 66513469K902 typically lasts 10 years with normal household use. Consistent cleaning, correct detergent and rinse aid use, and fixing small leaks or drain issues early are the biggest factors in reaching that lifespan; see the 66513469K902 owner's manual for routine care steps.

What affects lifespan the most

• Water quality: hard water speeds up mineral buildup on the heating system and inside the sump.
• Drain performance: slow draining strains the drain pump and can leave soil behind.
• Heating and drying: a weak heater can lead to poor drying and more residue.
• Door sealing: leaks can damage components and flooring.
• Loading habits: overloading blocks spray and increases rewash cycles.

Quick maintenance checklist (high impact)

Task	How often	Why it helps
Clean filters and check sump area	Monthly	Prevents clogs and protects the pump motor
Use rinse aid and keep it filled	Monthly	Improves drying and reduces spotting
Inspect for leaks at the door and under the unit	Monthly	Prevents corrosion and electrical issues
Run a hot cycle after cleaning the interior	As needed	Flushes loosened residue

Parts that commonly matter as the unit ages

If performance drops, these model-compatible parts are often involved:

• Dishwasher heating element W10518394 (heating and drying)
• Dishwasher drain pump WPW10348269 (draining at end of cycle)
• Dishwasher door seal W10542314 (leaks around the door)
• Fuse W10258275 (no power symptoms after an electrical event)

Why it matters

Knowing the typical 10-year lifespan helps you decide whether to maintain, repair, or refresh key components like the heating element, drain pump, or door seal before a small issue turns into a no-start or leak problem.

Last updated: March 2026