Kenmore 11022982101 washer Parts

Your Kenmore washer model number is printed on the model and serial number plate. On Kenmore model 11022982101, use that exact number (plus the serial number) when ordering parts or looking up procedures in the 11022982101 owner's manual.

Where to look for the model number plate

On Kenmore washers, the plate is typically in one of these spots:

• Under the lid near the tub opening (most top-load washers)
• Inside the door opening (most front-load washers)
• On the back panel near the power cord entry
• Along the cabinet frame near the control console

How to read the number correctly

Model numbers must match exactly, character-for-character. For Kenmore washers, you will often see a format like 110.XXXXXXXX or a longer number without the dot.

• Write it down exactly as shown (include all digits)
• Record the serial number too; it helps confirm production details
• Use the full model number when selecting parts like a lid switch, drain pump, or motor coupling

Quick checklist before ordering parts

Use this checklist to avoid wrong-part returns:

• Confirm the model number from the plate (not from the lid decal or marketing label)
• Match the full model number to the parts list for your washer
• Compare the part name and ID (example: washer lid switch WP8054980)
• If replacing a drive or drain component, verify symptoms first (spin, agitation, draining)
• Keep your purchase date and notes with your manual for future reference

Common “look-alike” numbers

What you see	What it usually means	What to do
11022982101	Full model number	Use it exactly for parts lookup
110.22982101	Same model with a dot format	Ignore the dot; digits still must match
Partial digits	Not enough to identify	Re-check the plate and copy all digits

Why it matters

Kenmore washers share many similar cabinets and controls across years, but internal parts can differ. Using the exact model number helps us match the correct diagrams and parts (for example, the correct motor coupling, gear case, or drain pump) for your washer.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable washing and spinning for far less than replacing the machine. For Kenmore model 11022982101, many common failures are repairable with standard parts, and a diagnosis usually points to a clear best next step.

Quick way to decide (repair vs. replace)

We use these practical checkpoints:

• Repair it when the washer still fills, agitates, drains, and spins (even if poorly) and the issue is isolated to a wearable part.
• Repair it when the cabinet and tub are solid and there is no ongoing leak.
• Replace it when the tub, basket, or drive system damage is extensive and multiple major parts are needed.
• Repair it when the symptom matches a high-success fix (coupling, lid switch, drain pump, agitator dogs).
• Replace it when repeated breakdowns are happening every few months.

Common repairs that are usually “worth it” on this style of Kenmore top-load washer

These are frequent, straightforward fixes on direct-drive Kenmore/Whirlpool-built top-load designs:

Symptom	Likely cause	Example part for this model
Won’t spin or agitate, motor runs	Drive coupling worn/broken	Washer motor coupling 285753A
Won’t drain or drains slowly	Pump jammed or failing	Washer drain pump WP3363394
Won’t run/spin with lid closed	Lid switch not closing electrically	Washer lid switch WP8054980
Agitator “slips” or won’t move clothes well	Worn agitator dogs	Agitator dog 80040

Why it matters

A targeted repair keeps your Kenmore 11022982101 running for years at a predictable cost, while replacing the washer often adds delivery, haul-away, and installation time. The best value comes from fixing one confirmed failure instead of guessing.

What we recommend before buying parts

Use the troubleshooting and safety guidance in the 11022982101 owner's manual to narrow the symptom, then confirm the failure:

• Unplug the washer before inspecting under the console or cabinet.
• Verify the lid closes firmly and the lid strike aligns.
• Check for standing water (drain issue) versus a no-agitate/no-spin issue (drive issue).
• Listen for motor sound: running motor with no movement often points to the coupling.
• Look for oil under the washer (can indicate a gear case problem).

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11022982101, staying within proper load size, using the right water level, and doing routine care from the 11022982101 owner's manual helps you reach the longer end of that range.

Typical lifespan and what affects it

Most top-load, direct-drive style Kenmore washers land in the 10 to 15 year window; heavy loads, frequent overloading, and poor leveling shorten life.

Big factors that extend lifespan:

• Keep loads balanced and avoid packing the basket tight
• Use the correct water level and cycle for the fabric type
• Level the washer to reduce vibration and cabinet stress
• Use the right amount of detergent to prevent residue buildup
• Address small leaks or unusual noises early

Parts that commonly limit washer life

Wear items and drive components usually decide whether a washer is worth repairing as it ages.

Symptom	Common wear area	Example part for this model
Agitator moves poorly or “slips”	Agitator dogs	Agitator dog 80040
Won’t spin or makes grinding noises	Drive system / transmission	Gear case 3360629
Won’t drain or leaves water in tub	Drain pump / hoses	Washer drain pump WP3363394
Loud banging or excessive shaking	Suspension support	Washer suspension spring WP63907

Quick maintenance checklist (high impact)

• Re-level the washer if it starts walking or vibrating
• Inspect hoses periodically for bulges, cracking, or seepage
• Clean detergent and softener areas to prevent clogs and odors
• Stop using the washer if you smell burning or hear repeated loud grinding

Why it matters

Knowing the 10 to 15 year average helps you decide between repair and replacement. If the washer is near the upper end of its lifespan, a major drive or gearcase repair can cost more than it is worth; smaller fixes (like agitation or draining issues) often make sense.

Last updated: February 2026