Craftsman 917276703 tractor Parts

The model number for this Craftsman riding lawn tractor is 917.276703 (often written without the dot as 917276703). You’ll see it listed on the cover of the owner's manual along with closely related models in the same series.

Where to confirm the model number on the tractor

We recommend matching the number on the tractor’s ID label to the manual and parts list.

• Check the product identification label (commonly under the seat, on the frame, or near the engine area)
• Match the full model number exactly (including any dots)
• Use the model number when ordering belts, pulleys, electrical parts, and deck components
• If the label is dirty or faded, clean it gently so all digits are readable

Common formats you’ll see (they mean the same model)

How it may appear	What it means
917.276703	Standard manual/label format
917276703	Same model number without punctuation

Why it matters

Craftsman tractors often share similar frames and decks across a model series, but parts like the ground drive belt, PTO switch, ignition switch, and mandrel assembly can vary by model number. Using 917.276703 helps ensure the parts diagrams and replacement parts match your exact tractor.

Last updated: February 2026

For Craftsman lawn tractor model 917276703, use SAE 30 engine oil when temperatures are above 32°F, and SAE 5W-30 when temperatures are below 32°F. Use a 4-cycle oil that meets API service SG, SH, SJ, SL, or higher as listed in the owner's manual.

Oil type and temperature guide

Match viscosity to your typical mowing temperature:

• Above 32°F (0°C): SAE 30
• Below 32°F (0°C): SAE 5W-30
• Use 4-cycle engine oil (do not mix oil with gasoline)
• Check oil with the tractor on level ground
• Fill only to the FULL mark on the dipstick (do not overfill)

Oil capacity for model 917276703

The manual lists these fill amounts:

Configuration	Oil capacity
With oil filter	4.0 pints
Without oil filter	3.75 pints

Quick oil check steps (before starting)

Use this routine to prevent low-oil operation:

• Park on a level surface and let the engine sit briefly
• Remove the oil fill cap/dipstick, wipe clean
• Reinsert and tighten, wait a few seconds
• Remove again and read the level
• Add oil in small amounts and recheck until at FULL

Why it matters

Correct viscosity protects the engine under load and improves starting. SAE 30 maintains film strength in warm weather; 5W-30 flows faster in cold weather so the engine lubricates quickly at startup.

Last updated: February 2026

Craftsman model 917.276703 is part of the 917.276700 through 917.276703 series shown on the cover of the owner's manual. The exact build year is identified from the tractor’s serial number and date code on the product label (typically under the seat or on the frame), not from the model number alone.

How to find the exact year on a 917.276703

Use these checks in order; they work for most Craftsman riding mowers and tractors:

• Look under the seat for a white or silver product label on the fender pan or frame.
• Record the serial number exactly as printed.
• Look for a date code on the label (often formatted as a date or a coded string).
• Compare the label information to the identification section in the owner's manual.
• If the label is missing or unreadable, inspect the frame rails and rear fender pan for a secondary sticker.

What we can confirm from the manual

The manual cover groups your tractor with these related models:

Manual series shown	Includes your model?	What it tells you
917.276700 to 917.276703	Yes	Your tractor shares the same operator manual and core operating procedures
24.0 HP, 48" mower, electric start, automatic transmission	Applies to the series	Helps confirm you have the correct manual for the tractor

Why the year matters

The production year affects parts and service details such as deck configuration, wiring changes, and which belt or switch version fits. When you’re ordering parts or troubleshooting starting and PTO issues, matching the serial/date code prevents wrong-part returns.

Related parts that commonly vary by production run

If you’re tracking down a year because you need a replacement, these are common “version-sensitive” items:

• Lawn tractor ignition switch 532193350
• Lawn tractor starter solenoid 582042802
• Switch.pto 582107601
• Lawn tractor ground drive or blade drive belt, 1/2 x 92-2/5-in 592855201

Last updated: February 2026