Kenmore 1068552680 refrigerator Parts

Your Kenmore side-by-side refrigerator model 1068552680 has a specific cubic-foot capacity tied to its exact configuration; the most reliable way to get the exact number is to read the capacity information from the refrigerator’s rating plate (model/serial tag) inside the fresh food compartment.

Where to find the cubic feet (fastest, most accurate)

Look for the rating plate and record the model number and capacity listed there.

• Check the inside walls of the fresh food section (often near the top or side wall)
• Check behind the crisper drawers or on the ceiling of the compartment
• Check the freezer side wall if you do not see it in the refrigerator section
• Write down the full model number exactly as shown: 1068552680
• If the tag is hard to read, take a clear photo and zoom in

If you want to estimate capacity (when the tag is missing)

If the rating plate is missing or unreadable, we use a volume estimate based on interior dimensions. This gives a ballpark number, not an exact spec.

• Measure interior width, height, and depth of the refrigerator section (in inches)
• Do the same for the freezer section
• Multiply each section’s measurements to get cubic inches
• Add the two sections together
• Convert to cubic feet by dividing by 1,728

Quick conversion table

What you have	Convert to	How
Cubic inches	Cubic feet	Divide by 1,728
Cubic feet	Cubic inches	Multiply by 1,728

Why it matters

Knowing cubic feet helps us match the right replacement parts and accessories for your Kenmore refrigerator, and it also helps when comparing storage size across side-by-side models.

Parts that commonly depend on the exact model

System	Example part on this model	What it affects
Ice maker	Refrigerator ice maker 4317943	Ice production and fit
Water system	Refrigerator valve 4318046	Water dispenser and ice maker fill
Temperature control	Refrigerator thermostat WP2198202	Cooling performance

If you are ordering parts for 1068552680, start with the parts list for this model; for broader model searches and ordering, use Sears PartsDirect.

Last updated: February 2026

Kenmore model numbers are read left to right; the first 3 digits identify the manufacturer code, and the remaining digits identify the specific product design and version. For your Kenmore side-by-side refrigerator model 1068552680, the 106 prefix is the key identifier we use to match the correct parts list.

Where to find the model number on a Kenmore refrigerator

We typically see the model and serial tag in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• On the door frame (open the door and check the vertical frame)
• Behind the toe grille (lower front kick plate area)
• On the back of the cabinet near the power cord

How to interpret the digits (what they usually mean)

Kenmore numbers are commonly structured like this:

• Prefix (first 3 digits): manufacturer code used for parts matching
• Core model digits: the base design or platform
• Suffix digits: revision, feature package, or production variation

Quick example using your model

Section	Example	What we use it for
Manufacturer prefix	106	Routes you to the correct parts family
Remaining digits	8552680	Narrows to the exact configuration

Why it matters for ordering parts

Using the full model number prevents wrong-part issues because small digit changes can affect fit and wiring. When you shop parts for 1068552680, match the model exactly, then confirm the part by name and ID.

Common examples on this model page include the refrigerator ice maker 4317943 and the refrigerator thermostat WP2198202. For broader model searches and ordering, we also support lookup by model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For a Kenmore side-by-side like model 1068552680, consistent maintenance and quick fixes (especially for cooling and door-seal issues) are what most often determine whether it lands closer to 10 years or pushes beyond 15.

Typical lifespan ranges (what we see most often)

• Average: 10 to 15 years
• Common “long life” outcome with good care: 15 to 20 years
• Shortened lifespan drivers: poor airflow around the cabinet, dirty condenser area, weak door seal, repeated temperature swings

Lifespan range	What it usually means	What to do now
0 to 10 years	Early wear or heavy use	Fix cooling/ice/water issues quickly to prevent compressor strain
10 to 15 years	Typical service life	Stay ahead of seals, airflow, and temperature control
15 to 20 years	Well-maintained unit	Replace wear parts as needed and keep temps stable

Maintenance that extends refrigerator life

• Keep door gaskets clean and sealing tightly; warm air leaks force longer run times.
• Maintain steady temperatures (avoid frequent “warm-ups” from propped doors).
• Don’t overload shelves so air can circulate through the fresh food and freezer sections.
• Address water and ice issues early to prevent leaks, clogs, and freeze-ups.
• Replace failed small parts promptly (switches, bulbs, valves) so the system operates normally.

Parts that commonly affect longevity on this model

If performance problems are starting, these are common “keep it running right” parts for Kenmore 1068552680:

• Refrigerator thermostat WP2198202 (temperature control problems, inconsistent cooling)
• Refrigerator door gasket 2188404A (warm air leaks, frost, longer compressor run time)
• Refrigerator valve 4318046 (water dispenser or ice maker fill problems)
• Refrigerator ice maker 4317943 (no ice, small cubes, intermittent production)

Why it matters

A refrigerator that runs longer than it should (from air leaks, poor airflow, or unstable temperature control) puts extra load on the sealed system. Keeping the cooling cycle efficient is the most reliable way to reach the upper end of the 10 to 15 year average.

If you decide to repair versus replace, we recommend pricing the needed parts for model 1068552680 from the parts list on this page, or searching by model number on Sears PartsDirect.

Last updated: February 2026

Water leaking from a Kenmore 1068552680 side-by-side refrigerator usually comes from a clogged or frozen defrost drain, a slow leak in the water supply or inlet valve, or a crack or loose connection in the dispenser or ice maker water tubing. We narrow it down by where the water shows up.

Quick checks to pinpoint the source

• Water under the freezer side: defrost drain or drain pan issue
• Water under the fresh food door/dispenser area: dispenser tubing or reservoir
• Water appears when nobody uses water/ice: inlet valve or supply line seep
• Ice sheet on freezer floor: frozen drain trough or drain hole
• Drips only after dispensing: reservoir or internal tube connection

Most common causes and fixes

Clogged or frozen defrost drain

Defrost water should flow through a drain hole to the drain pan. When it freezes or clogs, water backs up into the freezer and leaks out.

• Unplug the refrigerator.
• Melt ice in the drain trough with warm air.
• Flush the drain hole with hot water (turkey baster works well).
• Confirm water reaches the drain pan underneath.

Water inlet valve seeping

A valve that does not seal fully can drip into the fill tube or internal lines.

• Inspect the valve area at the back for mineral tracks or wetness.
• Replace the valve if it seeps; use the model-matched refrigerator valve 4318046.

Cracked or loose water tubing or reservoir

Leaks often show up after using the dispenser.

• Check the refrigerator water tube W10823511 for splits or loose fittings.
• Inspect the refrigerator reservoir WP2256126 for cracks or sweating that turns into drips.

Symptom-to-cause guide

Symptom	Most likely cause	First place to check
Puddle under freezer	Frozen/clogged defrost drain	Freezer floor and drain hole
Puddle near dispenser	Tube or reservoir leak	Behind dispenser, reservoir area
Random puddles, no use	Inlet valve seep	Back of unit at valve

Why it matters

Fixing leaks quickly prevents floor damage, reduces ice buildup that can block airflow, and helps the refrigerator hold steady temperatures.

Parts and DIY help

You can order parts from the parts list for model 1068552680, or search by model number on Sears PartsDirect. For dispenser access steps, use how to disassemble a Kenmore refrigerator dispenser.

Last updated: February 2026