Kenmore 66513469K901 undercounter dishwasher Parts

Yes. We still support parts for many Kenmore dishwashers, including model 66513469K901, as long as the specific replacement part is still manufactured and available. The key is matching the exact model number to the correct OEM-style part, such as a drain pump, heating element, or door seal.

Use the full model number 66513469K901 and confirm the part’s name and ID before ordering. Your 66513469K901 owner's manual also helps you identify common wear items and maintenance needs.

• Match the full model number exactly (including all digits and letters)
• Compare the part name and part ID, not just a description
• Check symptoms first (leak, no drain, no heat) so you replace the correct component
• Keep your old part until the repair is complete (for visual comparison)
• If you are unsure, verify with the wiring/installation information in the 66513469K901 installation guide

For this Kenmore model, these are examples of parts we commonly see customers replace:

Kenmore is a brand name used across multiple manufacturers and designs over the years, so “Kenmore dishwasher parts” is not specific enough. Using 66513469K901 prevents ordering a look-alike part that does not fit, leaks, or fails to connect correctly.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66513469K901 is usually worth it when the problem is a common wear item or a single failed part and the tub is in good shape. It becomes less cost-effective when multiple major components (pump, control, leaks) fail at the same time.

• Repair when the dishwasher is cleaning well overall and you have one clear symptom (no heat, won’t drain, minor leak).
• Replace when you have repeated breakdowns, heavy rust/corrosion, or multiple expensive parts needed.
• Repair when the fix is a straightforward part swap (heating element, drain pump, inlet valve).
• Replace when the tub is damaged or leaking from the tub itself.
• Repair when you can DIY safely and confirm the failure with basic checks.

A practical rule: if the repair is under ~50% of the cost of a comparable new dishwasher, repairing is the better value.

These are frequent “single-part” repairs that often restore normal operation:

• Dishwasher heating element W10518394 (poor drying, water not heating)
• Dishwasher drain pump WPW10348269 (standing water, won’t drain)
• Dishwasher door seal W10542314 (leaks at the door)
• Dishwasher water inlet valve W10648041 (won’t fill, fills slowly)
• Fuse W10258275 (no power symptoms after confirming supply)

A targeted repair can extend the life of your Kenmore dishwasher for years, especially when the failure is limited to one serviceable component. The 66513469K901 owner’s manual also covers care items that prevent repeat problems, such as cleaning and maintaining proper drainage (including the drain air gap, if your plumbing uses one).

Last updated: February 2026

On Kenmore undercounter dishwasher model 66513469K901, the model number is printed on the model and serial number label inside the dishwasher tub. Open the door and look along the tub frame area for the label; it lists both the model and serial.

• Open the dishwasher door fully
• Look inside the tub, not on the exterior front panel
• Check the tub frame area near the door opening
• Find the label that says “Model and serial number”
• Write down the full model number and serial number exactly as shown

The label is a manufacturer ID sticker or plate that includes key identification fields.

Using the exact model number prevents ordering the wrong Kenmore dishwasher parts (like a heating element, drain pump, or door seal) that may look similar but fit differently.

• Wipe the label gently with a damp cloth and dry it
• Use a flashlight and take a close-up photo to zoom in
• Copy characters carefully (especially 0 vs O, 1 vs I)

For a diagram showing the label location and other “parts and features,” use the 66513469K901 owner's manual.

Last updated: March 2026