Weed Eater FX26SCE trimmer Parts

If your Weed Eater FX26SCE string trimmer is flooded, clear the excess fuel by opening the throttle fully and pulling the starter repeatedly until it begins to fire, then let it run briefly to dry out. This restores the correct air to fuel mix for starting.

Quick steps to unflood a 2-cycle trimmer

• Move the trimmer to a well-ventilated area and set it on stable ground.
• Set the switch to ON.
• Hold the throttle wide open (full trigger).
• If your model has a choke lever, move it to RUN/OFF CHOKE.
• Pull the starter rope 8 to 15 times (pause a few seconds if it feels “loaded up”).
• When it sputters or starts, keep it running at a fast idle for 20 to 30 seconds.

If it still will not start

A flooded engine often leaves the spark plug wet and the fuel system over-primed. Use this checklist:

• Remove and dry the spark plug; reinstall and try the unflood steps again.
• Check the air intake path; a heavily fuel-soaked filter can restrict airflow.
• Drain old fuel and refill with fresh, properly mixed 2-cycle fuel.
• Inspect fuel lines for cracks, softness, or loose fit; replace if leaking air.
• Replace a restricted fuel filter if fuel flow looks weak.

Helpful fuel-system parts for the FX26SCE include the poulan lawn & garden equipment fuel line, small 530069247, ayp lawn & garden equipment fuel line, large 530069216, and the craftsman lawn & garden equipment engine fuel filter 530095646.

Why flooding happens (and how to prevent it)

Flooding is usually caused by too much priming, choking too long, or repeated start attempts without the engine firing. Once the crankcase is fuel-heavy, the spark cannot ignite the mixture reliably.

Prevention tips

Situation	What to do	Why it helps
Cold start	Use choke only until it pops once, then move to RUN	Prevents over-fueling
After a few pulls	Avoid re-priming	Primer adds fuel quickly
Storage fuel	Use fresh mix and do not store mixed fuel long-term	Old fuel starts poorly

Last updated: February 2026

FX26SCE is the model number used to identify your Weed Eater FX26SCE gas line trimmer when looking up diagrams and ordering the correct replacement parts. It is a product identifier, not an acronym with a universal “decoded” meaning.

What the characters typically indicate

Manufacturers often build model numbers from internal codes. For FX26SCE, the most practical takeaway is that the full string must match when you search parts.

Common patterns you may see:

• Letters at the start (FX): product series or platform
• Numbers (26): often engine size class or a series marker (varies by brand)
• Ending letters (SCE): feature package, emissions family, or revision code

Why using the exact model number matters

Small differences in a model number can change which carburetor, fuel lines, ignition parts, or drive shaft fit.

Here are examples of parts on this model’s list that depend on correct model matching:

• Poulan lawn & garden equipment fuel line, small 530069247
• Ayp lawn & garden equipment fuel line, large 530069216
• Line trimmer carburetor 577135902
• Ignition module 578287001

Quick check: “model code” vs “part number”

Item type	Example	What it’s used for
Model number	FX26SCE	Identifies the exact trimmer version
Part ID / part number	530069247	Identifies a specific replacement part

Why it matters

When a trimmer has fuel delivery or starting problems, the fix is often a model-specific part (fuel line size, fuel filter style, carburetor version). Using FX26SCE ensures we point you to parts that fit your exact unit.

Last updated: February 2026

For the Weed Eater FX26SCE gas line trimmer, fuel line size depends on whether you’re replacing the small return line or the larger supply line. We match this model to two different fuel line parts, so the correct “size” is the one that fits the routing and tank grommet on your trimmer.

Which fuel line does your FX26SCE use?

Most 2-cycle trimmers use two lines:

• Small line: typically the return line back to the tank
• Large line: typically the fuel supply line from the tank to the carburetor
• Lines must fit snugly through the tank opening and seal so the primer and carburetor can pull fuel

Model-matched options on this page:

• Poulan lawn & garden equipment fuel line, small 530069247
• Ayp lawn & garden equipment fuel line, large 530069216

How to choose the correct size (quick checks)

Use these practical checks before ordering:

• Match the old line: compare inside diameter (I.D.) and outside diameter (O.D.) to the original
• Check the tank pass-through: the line should be tight in the tank opening or grommet so it does not leak air
• Check the carb/primer nipples: the line should push on firmly without splitting
• Do not “size up”: a loose line causes hard starting, stalling, and poor priming

Small vs large fuel line: what changes

Line type	Typical role on a 2-cycle trimmer	Common symptom if wrong size
Small fuel line	Return/overflow to tank	Primer will not refill, fuel dribbles, air leaks
Large fuel line	Supply to carburetor	Starving for fuel, surging, dies on throttle

Why it matters

On the FX26SCE, the fuel system relies on airtight connections so the primer bulb and carburetor can move fuel. Even a slightly loose fuel line can introduce air, making the trimmer difficult to start and causing it to stall under load.

Last updated: February 2026