Kenmore 79094142310 electric range Parts

Kenmore model 79094142310 is made by Frigidaire (Electrolux family). The key clue is the 790 model prefix, which identifies the original manufacturer for many Kenmore electric ranges in this series; you can confirm the exact series format in the 79094142310 use & care guide.

How to confirm on the appliance ID tag

We recommend checking the model and serial tag on the range to verify you have the exact model.

• Locate the identification tag (commonly on the oven frame behind the storage drawer, or around the door frame area).
• Confirm the full model number reads 79094142310 (not just 790.9414*).
• Note the serial number; it helps match production series when ordering parts.
• Use the 790 prefix as the manufacturer identifier for this Kenmore line.

What the “790.9414*” format means

In the manual, the model family is shown as 790.9414*; the asterisk indicates a color code variation. Your full model number 79094142310 is the specific version within that family.

Where you see it	Example	What it tells you
Use & care guide cover	790.9414*	Model family/series (color varies)
Appliance ID tag	79094142310	Exact model needed for parts lookup

Why it matters for parts and troubleshooting

Knowing Frigidaire is the manufacturer helps us match the correct bake element, oven temperature sensor, surface element control switch, and wiring components for your Kenmore range.

• Parts diagrams and wiring layouts align to the Frigidaire-built platform.
• Error code behavior often follows the 790-series logic.
• Correct manufacturer mapping reduces wrong-part returns.

Last updated: February 2026

To reset your Kenmore electric range model 79094142310, turn the range’s power OFF at the breaker for 1 minute, then turn it back ON and reset the clock. This clears many control glitches after a power interruption or error.

Quick reset options (use the one that fits the symptom)

• Hard reset (best overall): Switch the range circuit breaker OFF for 60 seconds, then ON.
• Stop a cooking function: Press STOP to cancel an active bake, broil, or self-clean cycle.
• Unlock the controls (if “LOC” shows): Press and hold OVEN LOCK for 3 seconds; wait about 15 seconds for the latch to finish moving.
• After power returns: Set the time of day again (the clock typically needs resetting after power is removed).

If the display shows “LOC” (it is locked, not broken)

The oven lock disables the oven keys and can look like a control failure. Use the lock steps in the 79094142310 owner’s manual.

What to expect:

• The OVEN LOCK indicator flashes while the motorized latch moves.
• The door finishes locking or unlocking in about 15 seconds.
• Avoid pulling on the door while the indicator is flashing.

If the oven is stuck after Self Clean

If you stopped Self Clean or had a power interruption, the door can stay locked until the oven cools.

Situation	What we recommend	What you’ll see
Self Clean was running	Press STOP	Cycle cancels
Door won’t open	Wait for cooling time	Lock light stays on until safe
Lock light turns off	Open door normally	Door releases

For cycle steps and stopping instructions, use the 79094142310 owner’s manual.

Why it matters

A proper reset helps the electronic oven control recover from a glitch without replacing parts. If the oven still will not heat after a reset, common causes include a failed bake element, temperature sensor, or control issue.

Last updated: February 2026

On Kenmore electric range model 79094142310, the model and serial plate is typically on the lower right front frame of the range. You can usually see it by opening the oven door; an alternate location is under the cooktop. See the installation guide for the exact label locations.

Quick places to check

• Open the oven door and look along the front frame, especially the lower right side
• Check the front frame area behind the storage drawer (if your range has one)
• Lift the cooktop (if accessible on your style) and look underneath for the plate
• Look for a sticker or metal plate labeled Model and Serial
• Write down the full model number and serial number before ordering parts

What the label looks like

The plate usually includes:

• Model number (for example, 79094142310)
• Serial number
• Electrical rating information

What you need	Why you need it
Model number	Ensures diagrams and parts match your exact Kenmore range
Serial number	Helps confirm production details when troubleshooting or matching revisions

Why it matters

Kenmore ranges often have multiple versions that look similar. Using the exact model number helps us match the correct bake element, surface element control switch, oven temperature sensor, and other replacement parts for your specific range.

Last updated: February 2026

On the Kenmore 79094142310 electric range, simmer select is a low-heat burner mode that spreads the heat output across several low settings, so you can hold a gentle simmer or melt foods more steadily instead of cycling between “too hot” and “not hot enough.” See the 79094142310 owner's manual for the exact knob positions and recommended uses.

How simmer select works on this range

Simmering is part of the lowest power range for surface cooking. Your control lets you choose a low setting and fine-tune it for the pan and food.

• Use it for simmering, melting, and keeping warm.
• Expect gentle bubbling, not a rolling boil.
• Use a flat-bottom pan that matches the element size for stable heat.
• Adjust in small steps; low settings are sensitive to cookware and food volume.
• Keep the pan on the element before turning the knob on (safer and more consistent).

Best settings to start with

The manual’s suggested surface-element guidance places simmering at the lowest settings.

Cooking need	Typical control range	What you should see
Melt chocolate/butter	LO to 1	No bubbling, slow melt
Gentle simmer (soups/sauces)	LO to 2	Small bubbles around edges
Keep warm	LO	Warm food without cooking harder
Slow cook/poach	2 to 4	Occasional small bubbles

Quick checks if “simmer select” still seems too hot

• Verify the pan is centered and the bottom is flat.
• Try a heavier pan (thin pans overheat faster).
• Reduce the setting and give it a few minutes to stabilize.
• If one burner runs hot only on low, a failing infinite switch is common; for this model, the surface control options include the frigidaire range small surface element control switch 316436000 and frigidaire range surface element control switch 316436001 (match by burner size and knob layout).

Why it matters

A steady simmer prevents scorched sauces, broken emulsions, and boilovers; it also improves temperature control for delicate foods while using less energy than higher heat settings.

Last updated: February 2026

A Kenmore 79094142310 electric range oven typically stops working because it is not getting full power, the oven heat circuit has failed (common: a burned-out bake element), or the control detects a fault and shuts down heating. Start with power, then check heating and sensor-related issues using the 79094142310 owner's manual.

Quick checks we recommend first

• Verify the range has 240V power (a tripped breaker can leave you with lights but no heat).
• If the display is beeping and shows an F or E code, press STOP to clear it.
• Turn off power to the range for 5 minutes, restore power, set the clock, then try Bake again.
• Look for obvious damage: a blistered or broken bake element, burned wiring, or a loose terminal connection.
• If the oven heats unevenly or not at all, suspect the bake element or temperature sensor.

Most common causes (and what they look like)

Symptom	Likely cause	What to do next
Clock works, cooktop works, oven will not heat	Lost one leg of power (breaker issue)	Reset both breakers fully; confirm proper outlet/cord connection
Oven will not bake, broil may still work	Failed bake element	Inspect and replace the range bake element 316075103 if damaged
Oven temperature is erratic or shuts down	Faulty sensor or control fault	Check sensor wiring; consider the oven temperature sensor
Beeping with F/E code	Control detected a fault	Clear with STOP; power reset; if it returns, troubleshoot the code

Error codes and control beeping

If your control panel beeps and displays an F or E code, the manual’s “Before You Call” guidance is to:

• Press STOP to clear.
• Try Bake or Broil.
• Power the range off for 5 minutes, then retry.

For code meanings and next steps, use Kenmore 790 self-cleaning range error codes (many 790-series ranges share code logic).

Why it matters

An oven that “stops working” can be a simple power issue or a failed heating component. Checking power and fault codes first prevents unnecessary parts replacement and helps you target the right repair (element, sensor, wiring, or control).

Last updated: February 2026