Kenmore 1069545711 refrigerator Parts

Yes. We still offer replacement parts for Kenmore refrigerators, including the Kenmore 1069545711 side-by-side; you can match parts by model number and then choose the exact component you need (ice maker, thermostat, door gasket, light bulb, and more) from the parts list.

How to find the right part for model 1069545711

• Confirm the full model number on the rating label inside the fresh food section.
• Use the model-based parts list to avoid ordering a look-alike part.
• Match the part by function (cooling, ice and water, door sealing, lighting).
• Compare your original part’s markings and connector style before ordering.
• If your symptom is intermittent, check for loose wiring or frost buildup before replacing parts.

Common Kenmore 1069545711 parts customers replace

Here are examples of in-stock parts that commonly solve everyday refrigerator problems:

Symptom	Likely area	Example part for this model
No ice or small cubes	Ice maker system	Ice maker assembly - refrigerator ice maker by whirlpool 4317943
Warm refrigerator section	Temperature control	Refrigerator thermostat WP2198202
Frost buildup, poor airflow	Defrost system	Refrigerator defrost bi-metal WPW10225581
Dim or no interior light	Lighting	Refrigerator bulb WP22002263
Door not sealing, moisture	Door seal	Whirlpool refrigerator door gasket, black 2159083

Why it matters

Using the correct model-specific part helps restore proper temperatures, prevents food spoilage, and reduces strain on the compressor and fans. A mismatched gasket, thermostat, or ice maker assembly can create repeat failures and wasted time.

Ordering options

We recommend ordering directly from the parts list for Kenmore 1069545711 so the part fits your exact side-by-side configuration. If you are shopping for other Kenmore models or want to search by part number, use Sears PartsDirect.

Last updated: February 2026

On Kenmore side-by-side refrigerators like model 1069545711, the model number is printed on the appliance identification label, most often inside the fresh food compartment on a side wall near the crisper drawers or along the door frame. The same label typically lists the serial number.

Most common places to check

Look for a white or silver sticker or plate in these spots:

• Inside the refrigerator section on the left or right side wall
• On the ceiling of the fresh food compartment (near the light housing)
• Along the door frame (hinge side) when you open the refrigerator door
• Behind the crisper drawers (you may need to slide drawers out)
• On the back exterior panel (less common, but worth a quick check)

What the label looks like and what to write down

The label usually includes several fields. We recommend recording these exactly:

• Model (example: 1069545711)
• Serial (letters and numbers)
• Type or product code (if shown)
• Electrical rating (volts/amps), which helps when diagnosing cooling issues

Quick ID checklist

Item	Why it matters	Example format
Model number	Ensures you get the correct parts diagram and fit	1069545711
Serial number	Helps match production changes within the same model	Letters + numbers
Brand	Confirms parts family (Kenmore often uses Whirlpool-built designs)	Kenmore

Why it matters

Using the exact model number helps us match the correct parts for your refrigerator, especially for common repairs like ice maker issues, temperature control problems, and door seal leaks.

If you are troubleshooting an ice maker or dispenser issue after you find the model number, the parts list for 1069545711 includes items like the ice maker assembly - refrigerator ice maker by whirlpool 4317943. For broader parts searching by model number, use Sears PartsDirect.

Last updated: February 2026

Most Kenmore refrigerators, including model 1069545711, last 10 to 15 years with normal household use. With consistent maintenance and timely repairs, it’s common for a side-by-side refrigerator to reach the upper end of that range (or longer) before major cooling-system wear becomes the deciding factor.

Typical lifespan and what usually ends it

A refrigerator’s life is usually limited by sealed-system wear (compressor and refrigerant system) or repeated cooling/defrost failures.

• 10 to 15 years: typical service life for most refrigerators
• 15+ years: achievable when airflow is kept clear and temperatures stay stable
• Earlier replacement: often tied to chronic temperature swings, heavy frost buildup, or repeated ice maker and dispenser issues

Maintenance that adds years (high impact)

These steps reduce run time, prevent overheating, and help the refrigerator hold safe food temperatures.

• Clean condenser area regularly so heat can leave the cabinet efficiently
• Keep door gaskets clean and sealing flat; warm air leaks force longer run times
• Avoid overpacking; leave space for air circulation in both compartments
• Set stable temps (typical targets: 37°F fresh food, 0°F freezer)
• Fix small issues early (fan noise, frost buildup, slow ice production) before they strain the compressor

Parts that commonly affect longevity on this model

If cooling performance drops, these are common wear items that can restore normal operation and reduce stress on the compressor.

Symptom	Common cause	Example part on this model
Warm fridge or freezer, weak airflow	Evaporator fan issue	Refrigerator evaporator motor 4389144
Frost buildup, warming after a few days	Defrost control problem	Refrigerator defrost bi-metal WPW10225581
Temperature swings	Cold control/thermostat drifting	Refrigerator thermostat WP2198202
Ice maker stops or makes poor ice	Ice maker wear	Ice maker assembly - refrigerator ice maker by whirlpool 4317943

Why it matters

A refrigerator that runs hotter or longer than it should uses more energy and puts extra load on the compressor. Keeping airflow, defrost, and door sealing in good shape is the most reliable way to extend the lifespan of a Kenmore side-by-side.

For replacement parts for 1069545711, we recommend starting with the parts list for this model, or searching by model number on Sears PartsDirect.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 1069545711 has a specific cubic-foot capacity, but the most reliable way to get the exact number is to read the capacity from the model and serial (rating) label inside the fresh food compartment. If you are shopping parts or planning a repair, we can still match parts by model even if you do not know the cubic feet.

Where to find the cubic feet on the refrigerator

Look for the rating label in one of these common spots:

• On a side wall inside the fresh food section (often near the top)
• On the ceiling inside the fresh food section
• Behind the crisper drawers or on the liner near them
• On the inside edge of the door frame (fresh food side)

The label typically lists capacity in cu. ft. along with the model number and electrical ratings.

If the label is missing or unreadable

We use the model number to identify the correct parts and diagrams, so you can keep moving forward even without the capacity.

• Use model 1069545711 to look up the full parts list and diagrams
• Compare your refrigerator’s exterior width (most side-by-sides are about 32 to 36 inches wide) to narrow typical capacity ranges
• If you are troubleshooting cooling, focus on symptoms and components (thermostat, defrost system, evaporator fan) rather than cubic feet

Typical capacity range (helpful for planning)

Most Kenmore side-by-side refrigerators in this style fall into a mid-to-large capacity range.

Refrigerator type	Typical capacity range	What it helps with
Side-by-side refrigerator	20 to 26 cu. ft.	Fit planning, storage expectations
Compact/top-freezer (for comparison)	10 to 18 cu. ft.	Not usually applicable to this model

Why it matters

Cubic feet is mainly a planning number (storage and fit). For repairs and replacement parts, the model number is what matters, because it ties to the correct components such as the refrigerator thermostat WP2198202 and ice maker assembly 4317943.

If you are ordering parts and want to search beyond the parts shown for this model, we recommend using the model number on Sears PartsDirect.

Last updated: February 2026

To replace the ice maker in your Kenmore 1069545711 side-by-side refrigerator, we shut off power and water, remove the ice bin, unplug the ice maker wiring harness, unmount the old assembly, then mount and connect the replacement and restore utilities. Use the correct part for fit.

Before you start (safety and prep)

• Unplug the refrigerator or switch off the breaker.
• Turn off the refrigerator water supply valve.
• Empty and remove the ice container.
• Keep a towel handy for a small amount of water.
• Use a 1/4-inch nut driver or Phillips screwdriver (most common).

Replacement steps (typical side-by-side procedure)

• Remove the ice bin and any ice maker cover.
• Loosen and remove the mounting screws while supporting the ice maker.
• Unplug the wire harness connector from the freezer wall.
• Lift the ice maker off the mounting tabs or bracket.
• Install the new assembly on the tabs, tighten screws, and reconnect the harness.
• Reinstall the bin, turn water back on, then restore power.

Use the right replacement part

For this model, the ice maker replacement shown on this page is the ice maker assembly - refrigerator ice maker by whirlpool 4317943. Ordering by model number 1069545711 helps prevent wiring and mounting mismatches.

What to check after installation

Check	What “good” looks like	If not
Shutoff arm or switch	In the ON/down position (if equipped)	Set to ON and verify it moves freely
Fill tube alignment	Tube points into the ice mold area	Clear ice blockage and realign
Freezer temperature	Cold enough to freeze quickly	Set colder; allow 24 hours to stabilize

Why it matters

A properly mounted, correctly wired ice maker prevents leaks at the fill area, avoids stripped mounting tabs, and helps the dispenser system deliver consistent ice.

Ordering

You can order replacement parts from the parts list for Kenmore 1069545711, or search by model on Sears PartsDirect.

Last updated: February 2026