Kenmore 79096009601 electric range Parts

To reset your Kenmore electric range model 79096009601, turn the range OFF, then restore power by switching the range circuit breaker OFF for 1 minute and back ON. After power returns, reset the clock and any oven settings per the 79096009601 owner's manual.

Quick reset steps (most common)

• Turn all surface element knobs to OFF.
• If the oven is running, press Cancel/Off.
• At your home electrical panel, switch the range breaker OFF.
• Wait 60 seconds.
• Switch the breaker ON.
• Set the time of day again (the display often flashes 12:00 after an interruption).

What a reset fixes (and what it does not)

A power reset clears many temporary control glitches, but it will not repair a failed heating circuit.

Symptom	Reset helps?	Common next check
Display frozen or beeping	Yes	Check for stuck keypad, then try reset again
Oven will not start after outage	Yes	Set clock, then select Bake
Oven heats unevenly	Sometimes	Check bake element and temperature sensor
Surface element not heating	Sometimes	Check element switch and wiring

If the oven still will not heat after the reset

These are the most common causes on electric ranges like this Kenmore model:

• Failed frigidaire range bake element 316075103 (no bake heat)
• Failed frigidaire range oven temperature sensor 316490000 (wrong temp or error behavior)
• Control or wiring issue (burned connection, loose terminal)
• Broil element issue if broil also fails

Why it matters

The manual warns that if power fails, you should turn the range off; when power resumes, the range can begin operating again. Resetting power and then resetting the clock helps you return the electronic oven control to a known, safe state and restores normal operation.

Last updated: February 2026

Your Kenmore stove’s model number is printed on the appliance identification plate. On Kenmore model 79096009601, that plate is located on the right side of the oven front frame, inside the storage or warmer drawer compartment; pull the drawer out and look along the frame.

Where to look first (fastest checks)

• Pull out the bottom storage or warmer drawer and look on the right-side front frame
• Look for labels that say Model No. and Serial No.
• Write the model number exactly as shown (letters and numbers matter)
• Take a clear photo of the plate for ordering parts later
• Keep the model and serial number with your purchase records

What the model number looks like on Kenmore ranges

Many Kenmore ranges show the model as Model No. 790.XXXXXXXX on the identification plate. For this parts page, the full model is 79096009601.

What you see on the label	What it means	Example
Model No.	The full model number used to match parts and manuals	79096009601
Serial No.	The unique serial number for your exact unit	Varies

Why it matters

We use the model number to match the correct Kenmore electric range parts (like a bake element, oven temperature sensor, or control overlay) because similar-looking ranges can use different wiring, elements, and control boards.

Next step after you find it

Use the model number to confirm operating details and features in the 79096009601 owner's manual.

Last updated: February 2026

The Kenmore 79096009601 electric range has an oven capacity of 5.3 cubic feet. You can also confirm the listed capacity and other specifications in the 79096009601 owner's manual.

Confirming capacity on your range

We recommend using these quick checks so you match the correct spec for your exact unit.

• Check the specifications section in the 79096009601 owner's manual
• Look for the model/serial tag on the oven front frame (inside the storage or warmer drawer area)
• Compare the model number on the tag to 79096009601
• If you are planning a replacement, verify cabinet clearances in the 79096009601 installation guide

Capacity reference

Model	Oven capacity	Notes
79096009601	5.3 cu ft	Full-size freestanding electric range oven

If you want to measure the interior (optional)

Measuring is useful for cookware fit, but it can read slightly different than the published capacity.

• Measure interior width, height, and depth in inches
• Multiply: W × H × D to get cubic inches
• Divide by 1,728 to convert to cubic feet

Why it matters

Oven capacity affects whether large roasting pans fit, how much air space you have around bakeware for even heating, and how this Kenmore range compares to other 30-inch electric ranges.

Last updated: February 2026