Kenmore Elite 79574099410 refrigerator Parts

On Kenmore Elite model 79574099410, the model and serial number label is typically inside the fresh food compartment (often on a side wall) or inside the freezer area; it can also be behind the lower crisper drawer area or near the front kickplate. Use the label to match parts and the correct owner's manual.

Common places to check first

• Inside the refrigerator compartment on the left or right interior wall
• On the ceiling area inside the fresh food section (near the controls)
• Inside the freezer compartment on an interior wall
• Behind or just above the lower crisper drawers (check the wall behind the drawer bins)
• Near the front base, behind the kickplate or grille (if your unit has one)

What the label looks like (and what to write down)

The tag is usually a white or silver sticker/plate with printed fields. Record:

• Model number (for example, 79574099410)
• Serial number
• Electrical ratings (volts/amps) if you are troubleshooting power or control issues

Why it matters

We use the exact model number to ensure parts fit and function correctly on your Kenmore Elite bottom-mount refrigerator. Even small model-number differences can change which control board, ice maker, or water valve your refrigerator uses.

Quick part-matching examples for this model

If you are working on	Match the part to the model label, then look up
Water taste/flow issues	Genuine Kenmore refrigerator water filter 9690 AGF80300801
No ice or weak ice production	Lg refrigerator ice maker AEQ73130004
Water not dispensing or slow fill	Lg refrigerator water inlet valve AJU72992603

Last updated: February 2026

Kenmore model numbers are read left to right: the first 3 digits are the manufacturer prefix, and the remaining digits identify the specific design series and feature set. For your Kenmore Elite refrigerator model 79574099410, the 795 prefix is the key identifier for the manufacturing source, and 74099410 narrows it to the exact bottom-mount configuration.

Where to find the model number on a Kenmore Elite refrigerator

We use the full model number to match parts like a water filter, ice maker, or control board correctly.

• Look on the rating label inside the fresh food compartment (often on a side wall)
• Check near the crisper drawer area or door jamb
• If you cannot find it inside, check the back exterior panel
• Write down the full number exactly as shown (all digits matter)

How to interpret the digits (what they usually mean)

Kenmore numbers are structured so the prefix identifies who built the unit, and the rest identifies the platform and revisions.

Section of model number	Example from 79574099410	What it tells you
Manufacturer prefix	795	Who built the refrigerator platform
Base model / series	74099	The design family and major features
Revision / variation	410	Production variation (color, trim, updates)

Why the prefix matters when buying parts

Parts compatibility is tied to the exact platform. Using only “Kenmore Elite bottom-mount” can lead to ordering the wrong item.

• Water system parts vary by filter head and housing style
• Ice maker assemblies differ by harness and mounting
• Control boards and sensors can change across revisions
• Door hardware and drawer rails are model-specific

If you are confirming a replacement filter for this model, we match by model number and the filter part listing, such as the genuine Kenmore refrigerator water filter 9690 AGF80300801.

Helpful documentation

Your owner's manual shows where labels are located and how the controls and features are laid out, which helps confirm you are using the correct full model number.

Why it matters: The full model number is the fastest way to ensure the parts you choose fit your Kenmore Elite 79574099410 the first time.

Last updated: February 2026

Yes. The Kenmore Elite 79574099410 is part of Kenmore’s premium (Elite) lineup, so it’s positioned as a higher-end bottom-mount refrigerator with more feature-focused design than standard Kenmore models. For model-specific features and operating details, use the owner's manual.

What “high end” means for this model

“High end” usually comes down to features, fit and finish, and overall user experience. With Kenmore Elite models like 79574099410, you typically get a more premium configuration and controls compared to entry-level refrigerators.

Common high-end traits you’ll see in this class include:

• More precise temperature control ranges and settings
• Through-the-door ice and water dispensing (when equipped)
• Better compartment organization and storage flexibility
• More electronics (control boards, sensors, dispenser components)
• Higher parts complexity (more assemblies vs. simple mechanical parts)

Quick way to judge “premium” on your refrigerator

Use this checklist on your 79574099410:

• Does it have a working dispenser with cubed and crushed ice selection?
• Do the touch controls respond consistently (not erratic from moisture)?
• Can you hold stable temps (fridge 33°F to 46°F; freezer -6°F to 8°F) after 24 hours?
• Are vents clear so airflow is not restricted?
• Are you maintaining it with routine filter changes?

Features and parts that support a premium setup

Higher-end refrigerators often rely on more specialized parts. Examples available for this model include:

• Kenmore refrigerator water filter 9690 AGF80300801 for water quality and dispenser performance
• Lg refrigerator ice maker AEQ73130004 for ice production
• Refrigerator electronic control board CSP30020901 for temperature and system control

Common “premium feature” parts and what they affect

System	What you notice	Example part on this model
Water filtration	Taste, flow rate, dispenser performance	Water filter, filter bypass
Ice maker/dispenser	Ice output, crushed/cubed selection	Ice maker, auger motor, chute door motor
Cooling control	Stable temps, defrost performance	Sensors, control board

Why it matters

A higher-end refrigerator like the Kenmore Elite 79574099410 can deliver better convenience and control, but it also depends more on sensors, valves, and boards. Keeping airflow clear, settings correct, and filtration current helps it perform like a premium unit.

Last updated: February 2026

A Kenmore Elite refrigerator model 79574099410 typically lasts 10 to 15 years. Regular maintenance, correct temperature settings, and good airflow help it reach the higher end of that range and reduce the chance of expensive failures like compressor or cooling-system problems.

Typical lifespan and what affects it

Most bottom-mount refrigerators fall into a predictable lifespan range, but real-world results depend on how hard the unit works and how well it is maintained.

• Maintenance habits (coil cleaning, door seal care) strongly influence longevity
• Room conditions (heat, humidity, tight cabinetry) can shorten life
• Usage (frequent door openings, heavy ice maker use) increases wear
• Airflow inside the cabinet matters; blocked vents can cause warm temps and moisture
• Stable temperature settings reduce run time and stress on the sealed system

Maintenance that helps your 79574099410 last longer

Use these steps as a simple routine; they prevent common cooling and ice maker complaints.

• Keep interior air vents clear so cold air can circulate properly
• Set temps within the normal ranges (refrigerator 33°F to 46°F, freezer -6°F to 8°F) and wait 24 hours after changes before adjusting again
• Replace the water filter on schedule to protect water flow and ice maker performance (use genuine Kenmore refrigerator water filter 9690 AGF80300801)
• Clean dust from the condenser area periodically to help the unit cool efficiently
• Watch for early symptoms: warming temps, excess frost, water leaks, loud fan noise

Common “big-ticket” parts vs. smaller fixes

These examples help you judge whether a repair is minor or more involved.

Issue type	What you may notice	Parts often involved (examples)
Cooling performance	Warm fridge/freezer, long run times	Refrigerator condenser coil ACG73645004, refrigerator compressor TCA35111303
Defrost problems	Frost buildup, poor airflow, warming	Refrigerator defrost sensor assembly 6615JB2005R
Water and ice	Slow water, no ice, small cubes	Lg refrigerator water inlet valve AJU72992603

Why it matters

Once a refrigerator reaches the 10 to 15 year mark, preventive care becomes the difference between a simple part replacement (like a water filter or sensor) and a costly cooling-system repair. Keeping vents clear and temperatures stable also helps food stay safe and reduces moisture issues.

For model-specific operating guidance (including temperature control behavior and airflow tips), use the owner's manual.

Last updated: February 2026

Common problems we see with the Kenmore Elite 79574099410 bottom-mount refrigerator include warm temperatures from restricted airflow or dirty coils, defrost-related frost buildup, ice maker and dispenser issues, water leaks, and unusual noises. Many symptoms improve by correcting temperature settings and keeping vents clear (see the owner's manual).

Most common symptoms and what usually causes them

• Not cooling well or temperature swings: blocked air vents, dirty condenser area, failing fans, or a defrost problem
• Freezer frosting up: defrost sensor or defrost system trouble; airflow gets restricted
• Ice maker not making ice: water supply issue, inlet valve problem, or ice maker assembly failure
• Water dispenser not working: control lock enabled, door not fully closed, or dispenser switch issue
• Water leaking or puddles: clogged/iced drain path or a cracked drain tube
• Noisy operation: fan noise, ice maker/auger noise, or compressor-related vibration

Quick checks we recommend first (no parts needed)

1. Confirm control settings: Refrigerator range is 33°F to 46°F; freezer range is -6°F to 8°F. Adjust one step at a time and wait 24 hours between changes.
2. Check airflow: do not block interior vents with food packages.
3. Dispenser basics: the dispenser will not run if a door is open or if Control Lock is on; keep the touch display clean and dry.
4. Listen for fans: a stalled evaporator fan often causes warm fridge temps with a cold freezer.

Parts that commonly fix these problems (when troubleshooting points there)

Symptom	Common part area	Example part for this model
Warm temps, long run times	Condenser system	Refrigerator condenser coil ACG73645004
Frost buildup, warm fridge	Defrost sensing	Refrigerator defrost sensor assembly 6615JB2005R
No ice or slow ice	Ice maker	Lg refrigerator ice maker AEQ73130004
No water to dispenser/ice maker	Water valve	Lg refrigerator water inlet valve AJU72992603
Puddles under/inside	Drain path	Refrigerator drain tube 5251JA3003D

Why it matters

Cooling, ice, and leak complaints are often connected. A small airflow restriction or a defrost issue can raise temperatures, soften ice cream, reduce ice production, and create moisture that later shows up as leaks.

Helpful model-family troubleshooting

For display or diagnostic codes commonly seen on Kenmore 795 bottom-freezer models, use our Kenmore 795 model bottom freezer refrigerator error codes guide to match the code to the likely failure area.

Last updated: February 2026