Kenmore 11173042610 refrigerator Parts

To tell what model Kenmore refrigerator you have, look for the model and serial number on the identification label inside the fresh food (refrigerator) compartment. For Kenmore model 11173042610, the label is typically on the interior liner of the refrigerator compartment; match that model number exactly when ordering parts or checking instructions in the 11173042610 owner's manual.

Where to find the model and serial label

Check these common spots first (use a flashlight and look along the cabinet walls):

• Inside the refrigerator compartment on the interior liner (side wall is most common)
• Near the top front frame inside the refrigerator compartment
• Behind or beside the crisper drawers on the inner side wall
• On a side wall inside the freezer drawer area (less common on bottom-mount units)
• Behind the toe grille or kick plate area (occasionally)

What to write down (and why)

Record both numbers exactly as shown so you can get the right Kenmore refrigerator parts and service information.

Item to record	What it’s used for	Example format
Model number	Identifies the exact design and parts list	11173042610
Serial number	Helps identify production run details	Letters and numbers
Date of purchase (if known)	Helpful for service and maintenance history	Month/Year

Tips to avoid ordering the wrong parts

• Copy the model number character-for-character (no spaces, no missing digits)
• If your label shows a series like 111.7304*, use the full model from the tag (for example 11173042610)
• Use the model number, not the refrigerator’s brand name alone (Kenmore covers multiple designs)
• If the label is worn, take a clear photo and zoom in to confirm digits

Why it matters

Kenmore refrigerators can look similar across series, but parts like door bins, drawers, filters, fans, and control boards can vary by model. Using the exact model number (such as 11173042610) keeps troubleshooting steps and replacement parts aligned with your refrigerator.

Last updated: February 2026

For Kenmore model 11173042610, the most accurate way to get cubic feet (total capacity) is to look up the specifications in the 11173042610 owner's manual or on the refrigerator’s identification label inside the fresh food compartment; that label is where the manual says the model and serial information is printed.

Fast ways to find the cubic feet

• Check the specs section in the manual: capacity is typically listed with other key specs. Use the 11173042610 owner's manual.
• Look for the rating/ID label: it’s on the interior liner of the refrigerator compartment (fresh food section). Write down the model and serial number.
• Search by the full model number: use the complete model number 11173042610 (not a shortened version) when looking up specs.
• Do a quick interior estimate (backup method): measure usable interior width, depth, and height (in inches) and convert to cubic feet.

Quick capacity estimate (when you cannot find the spec)

If you want a rough estimate, use this conversion:

What you measure	How to calculate	Result
Interior space (inches)	width × depth × height	cubic inches
Convert to cubic feet	cubic inches ÷ 1,728	cubic feet

Tip: Measure the main open cavity, then subtract space taken by thick walls, drawers, and the ice maker housing; this keeps the estimate realistic.

Why it matters

Cubic feet helps us match the right refrigerator water filter, air filter, shelving, and storage bins, and it also helps when comparing energy use and cooling performance across bottom-mount refrigerator sizes.

Related help for this model family

If you are checking capacity because the display is showing a code or cooling seems off, use our Kenmore 111 model bottom freezer refrigerator error codes guide to narrow down the issue before replacing parts.

Last updated: February 2026

Kenmore model numbers tell us the product type and the exact design version so we can match the right parts and instructions. For your Kenmore bottom-mount refrigerator, the model is 111.73042610 (often shown as 111.7304* in the literature); use the full number when ordering parts or checking specs in the 11173042610 owner's manual.

Where to find the model number on a refrigerator

Most Kenmore refrigerators place the model and serial label in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food section near the light
• Behind the crisper drawers on an interior wall
• On the cabinet frame near the door hinge area
• Occasionally on the back of the unit near the lower service area

How to interpret a Kenmore model number (quick guide)

Kenmore model numbers are typically broken into meaningful chunks. Here is the practical way we read them for parts lookup:

• Prefix (first 3 digits): identifies the manufacturing source (helps narrow the parts system)
• Series digits: identify the product platform (for example, a bottom freezer design family)
• Suffix digits: identify feature and production variations (color, revision, options)
• Full model required: the complete model number is what ensures the correct match

Example using your refrigerator

What you see	What it means for parts and manuals
111.7304*	Model family used in the Use & Care Guide (covers multiple variants)
111.73042610	Your exact model; use this for parts compatibility

Why the “full model number” matters

Small digit changes can mean different door bins, control boards, ice maker styles, or shelving layouts. Using 11173042610 helps us avoid ordering a part that fits a similar 111.7304 variant but not your exact refrigerator.

Helpful next steps

• Match the label exactly, including all digits
• Use the full model number when searching parts and diagrams
• If you see an error code on the display, use the Kenmore 111 model bottom freezer refrigerator error codes guide to narrow the failure to a system (cooling, defrost, fan, sensor)

Last updated: February 2026

A bottom-mount refrigerator like Kenmore model 11173042610 keeps fresh foods at eye level and puts the freezer below, so we reach everyday items with less bending. This layout also supports flexible fresh-food storage with adjustable shelves and humidity-controlled crispers (details in the 11173042610 owner's manual).

Key advantages you will notice day to day

• Easier access to fresh food: the refrigerator section is on top, where we use it most.
• Less bending: freezer items are in a pull-out drawer below.
• More organized fresh-food storage: adjustable shelves help fit tall bottles and large containers.
• Better produce storage control: humidity-controlled crispers help keep fruits and vegetables fresher.
• Cleaner look and better door alignment: leveling and door adjustment help doors sit even and seal well.

Storage and usability features that support the design

The 111.7304* platform described in the manual includes adjustable shelving and crispers designed to reduce door-open time and improve organization.

Feature	What it helps with	Why it is useful in a bottom-mount layout
Adjustable refrigerator shelves	Fitting tall or bulky items	Keeps frequently used items easy to see and grab
Humidity-controlled crisper	Produce freshness	Lets us choose higher humidity for leafy greens or lower for fruit
Leveling legs and door adjustment	Door sealing and appearance	Helps prevent uneven doors that can waste energy

Why it matters

Most households access the fresh-food compartment far more often than the freezer. A bottom-mount design reduces strain, improves visibility of refrigerated items, and helps us keep food organized so the doors stay open for less time.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators (including model 11173042610) are cooling problems, water leaks, ice maker or dispenser trouble, doors that will not seal or close, and unusual noises. Many are caused by airflow restrictions, temperature settings, or door and water-supply issues outlined in the 11173042610 owner's manual.

Common problems and what usually causes them

• Not cooling or too warm: warm room location, frequent door openings, hot food load, or restricted condenser airflow (dirty/clogged vents).
• Food freezing in the fresh food section: items placed near air vents, or temperature set too cold.
• Ice maker not making enough ice: freezer temperature too warm (target is typically 0°F), doors not closing fully, or frequent door openings.
• Slow water dispensing: a used-up water filter or a kinked water supply line.
• Doors popping open or not closing: bins/shelves out of position, food packages blocking the door, or the refrigerator not level.

Quick checks we recommend first (fast, no parts)

• Wait up to 24 hours after installation or major temperature changes for temps to stabilize.
• Confirm the unit is used within normal room conditions (avoid very hot areas; do not operate above 110°F).
• Reduce long door openings; they quickly raise temperature and humidity.
• Make sure shelves, bins, and drawers are fully seated so doors close correctly.
• Clean sticky/dirty door gaskets with mild soap and water; dry thoroughly.

Symptom-to-fix guide

Symptom	Most likely quick fix	What to check next
Refrigerator or freezer too warm	Limit door openings; allow 24 hours	Clean condenser cover/vents (do not remove the back panel)
Ice maker low production	Set freezer near 0°F	Verify doors fully close; check for warm air leaks
Slow water flow	Replace water filter	Inspect for kinked supply line
Door will not close	Reposition bins/food	Level the refrigerator

Why it matters

Most “big” refrigerator complaints trace back to temperature stability and airflow. When doors do not seal, vents are blocked, or the condenser area is clogged, the compressor runs longer and temperatures drift, which affects food safety and ice production.

For model-specific troubleshooting steps and control settings, use the 11173042610 owner's manual. For code-related issues on this platform, use Kenmore 111 model bottom freezer refrigerator error codes.

Last updated: February 2026

On a Kenmore bottom-mount refrigerator like model 11173042610, the “bottom part” is usually called the base grille or kickplate on the outside; behind and underneath it is the machine compartment (where cooling-system components like the compressor and condenser area are located). For diagrams and names, use the 11173042610 owner's manual.

Common names for “the bottom part” (what you might mean)

• Base grille / kickplate: the removable lower front cover near the floor
• Machine compartment: the space behind the base grille that houses mechanical parts
• Drain pan (evaporator drip tray): catches defrost water underneath the cabinet
• Leveling legs / rollers: hardware at the bottom used to stabilize and level the refrigerator
• Bottom freezer drawer: the lowest storage compartment on a bottom-mount design

Quick identification guide

What you see	Most common name	What it does
Slotted or solid panel at the very bottom front	Base grille / kickplate	Covers and helps direct airflow to the lower compartment
Warm air and a hum coming from the lower rear	Machine compartment	Runs the cooling system (compressor and heat rejection area)
Water collecting under the unit	Drain pan	Evaporates defrost water over time
Unit rocks or doors don’t line up	Leveling legs	Keeps the cabinet stable and doors sealing properly

Why it matters

Using the right term helps you troubleshoot faster and order the correct refrigerator parts. It also improves safety; our Kenmore guide warns against putting hands under the refrigerator where sharp edges and electrical components may be present.

Safety and care tips for the bottom area

• Unplug the refrigerator before removing the base grille or inspecting underneath
• Keep hands clear of sharp metal edges under the cabinet
• Vacuum dust from the lower front and rear vents to help airflow
• If the refrigerator wobbles, adjust the leveling legs so it sits solidly
• If you see water underneath, check for a blocked defrost drain and confirm the drain pan is seated

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For a Kenmore bottom-mount refrigerator like model 11173042610, lifespan depends most on airflow (clean condenser area), tight door seals, stable temperatures, and fixing cooling or ice maker issues early; see the 11173042610 owner's manual for care and cleaning guidance.

Typical lifespan ranges (what we see most often)

• 10 to 15 years: common for modern refrigerators with normal use
• 15 to 20 years: achievable with consistent maintenance and timely repairs
• Under 10 years: usually tied to poor ventilation, dirty coils, door gasket leaks, or unresolved cooling problems

Refrigerator situation	What it usually means	What to do first
Runs constantly	Heat can’t leave the cabinet efficiently	Clean condenser area; confirm doors seal
Frost buildup in freezer	Airflow or defrost issue	Check door closure; look for blocked vents
Warm fridge, cold freezer	Air not moving to fresh food section	Inspect vents; listen for evaporator fan
Water/ice issues	Extra wear on valve, lines, ice maker	Replace filter on schedule; verify water pressure

Maintenance that extends life the most

• Keep the condenser area clean so the compressor does not overwork.
• Make sure door gaskets seal all the way around; adjust doors if they sag.
• Keep air vents inside the refrigerator and freezer clear of food packages.
• Set stable temps (typical targets: 37°F fresh food, 0°F freezer).
• Replace the water filter on schedule if your model uses one; follow how to replace the water filter in a Kenmore refrigerator.

Why it matters

A refrigerator usually fails early because it runs hot or runs nonstop. Simple upkeep reduces compressor runtime, protects food temperatures, and prevents small airflow or defrost problems from turning into major repairs.

Last updated: February 2026

Kenmore is a brand name, so replacement parts for a Kenmore refrigerator like model 11173042610 are made by the original equipment manufacturer (OEM) that built that specific refrigerator, then sold under the Kenmore name. For this model family (111.7304*), the use and care guide identifies it as a Daewoo-built platform.

How to tell who made parts for your exact Kenmore model

The most reliable way is to match the model number and the manual information:

• Use the full model number 11173042610 (not just “111”) when searching parts.
• Check the model family shown in the documentation (for this unit: 111.7304*).
• Use the parts diagrams and part descriptions to confirm fit before ordering.
• If you see multiple similar-looking parts, match by function and location (for example: evaporator fan motor vs. condenser fan motor).
• Keep your proof of sale and warranty details handy for service decisions.

Reference: 11173042610 owner's manual

Common OEMs behind Kenmore appliances (what it means for parts)

Kenmore appliances have been produced by different manufacturers over the years. That is why “Kenmore parts” can come from different OEM supply chains depending on the model prefix.

Kenmore model prefix (common)	Typical OEM family	What you’ll notice when ordering parts
111	Daewoo platform (common)	Parts and diagrams align to Daewoo-style assemblies
253	Frigidaire/Electrolux platform (common)	Error codes and components often match 253-series guidance
106	Whirlpool platform (common)	Many parts cross to Whirlpool-built designs

Why it matters

Ordering by brand alone can lead to the wrong water filter, door gasket, or ice maker component. Matching parts to 11173042610 ensures the correct fit, proper sealing, and correct electrical connectors.

Related troubleshooting help

If you are chasing a display error or cooling issue, use our model-family guidance: Kenmore 111 model bottom freezer refrigerator error codes

Last updated: February 2026

Water leaking from the bottom of your Kenmore 11173042610 bottom-mount refrigerator is usually caused by a defrost drain that is clogged or frozen, which makes defrost water overflow and run down to the base area. A cracked or mispositioned drain pan can also let water escape underneath.

Most common causes (and what to check first)

• Clogged or frozen defrost drain: Water from the defrost cycle cannot flow to the drain pan.
• Drain pan issue: Pan is out of place, cracked, or overflowing.
• Door not sealing well: Excess frost forms, then creates extra meltwater during defrost.
• Water line connection seepage (if connected to water/ice): A loose fitting or tubing issue can drip and track to the bottom.
• Water pressure problems: Pressure outside the recommended range can contribute to leaks at fittings.

Step-by-step: quick leak isolation

1. Unplug the refrigerator and pull it forward.
2. Look for the water type:
   • Clear water near the center bottom often points to the defrost drain/drain pan.
   • Water near the back lower area can point to water line/tubing.
3. Check the drain pan underneath:
   • Confirm it is seated flat and not cracked.
   • Dry it, then recheck after 12 to 24 hours.
4. Check for a frozen/clogged defrost drain:
   • Inspect the drain opening inside the freezer area.
   • Melt ice with warm water (a turkey baster works well) and clear debris with a pipe cleaner.
5. If you have an ice maker or water dispenser, inspect the supply line and fittings; the manual notes the water line should connect to a cold water supply and calls out water hammer as a leak risk.

Helpful specs and targets

Item	Recommended target	Why it matters
Water supply pressure	30 to 125 psi	Helps prevent seepage at fittings and valve connections
Water source	Cold water only	Reduces tubing stress and leak risk

Why it matters

Leaks at the bottom often start as normal defrost water that is not draining correctly; the longer it continues, the more likely you will see floor damage, ice buildup, and temperature swings.

For model-specific locations and diagrams, use the 11173042610 owner's manual. For water and ice related prevention tips, use how to prevent water dispenser and ice maker problems.

Last updated: February 2026