Kenmore 25370413415 refrigerator Parts

For Kenmore model 25370413415, we recommend contacting Sears PartsDirect support for help with parts, troubleshooting, and service guidance. For operating, warranty, and setup details, use the 25370413415 owner's manual.

Use the option that matches what you need (warranty, parts, or installation questions):

• Warranty or service questions: Review your warranty documentation and contact Sears PartsDirect support with your model and serial number.
• Model and serial details: Record your model and serial number from the refrigerator rating label.
• Installation and setup questions: Follow the steps and safety notes in the 25370413415 installation guide.
• Parts identification: Use the model number 25370413415 when ordering parts like a door gasket, temperature sensor, or control board.
• Error code help (if your display shows a code): Use Kenmore 253 series french door refrigerator error codes to match the code to likely causes.

Having this information speeds up troubleshooting and service planning:

• Model number: 25370413415
• Serial number (from the rating label)
• Purchase date and proof of sale (for warranty questions)
• A short symptom description (for example: “not cooling,” “ice maker not working,” “door not sealing”)
• Any error codes shown on the user interface

Kenmore refrigerators often share similar symptoms across cooling, defrost, and door-seal systems. When you have the model/serial number and clear symptoms ready, we can quickly narrow down whether you need a setup correction, troubleshooting steps, or a replacement part.

Last updated: March 2026

Your Kenmore refrigerator’s model number is printed on the serial plate inside the fresh food (refrigerator) compartment. On Kenmore model 25370413415, you’ll typically find it on an inside wall; use the exact model number on the plate when ordering parts or checking instructions in the 25370413415 owner's manual.

Check these common locations first (use a flashlight and look for a sticker or metal tag):

• Inside the refrigerator compartment on a side wall (most common)
• On the ceiling of the fresh food compartment near the light cover
• On the inside wall behind or near the crisper drawers
• Along the door frame area when the door is open
• Behind the lower kickplate or toe grille (less common)

Record both numbers exactly as shown; they are used for parts matching and service.

Small character differences matter (especially 0 vs O, 1 vs I).

• Copy the model number character-for-character
• Take a clear photo of the serial plate for reference
• Use the model number when selecting items like a door gasket or control board
• If you’re replacing a maintenance item, follow the steps in the installation guide

Kenmore refrigerators share similar styling across series, but parts like door gaskets, sensors, and user interface components can vary by model. Using the exact model number ensures the right fit and proper operation.

Last updated: February 2026

Yes. On Kenmore model 25370413415, you can reset the controls by using the default settings option on the control panel; for a full power reset, unplug the refrigerator from the wall outlet for a few minutes, then plug it back in (the Power on-off icon does not remove power). See the 25370413415 owner's manual for the exact button locations.

• Reset settings (recommended first): Touch default settings to restore factory defaults for temperature, temperature display, and tones.
• Turn cooling off and back on: Press and hold Power on-off for 3 seconds to stop the cooling system (display reads OFF); press and hold again to resume cooling.
• Full power reset: Unplug the power cord from the wall outlet for 3 to 5 minutes, then plug it back in.
• Water filter light reset (if needed): Press and hold water filter for 3 seconds after changing the filter.

1. Tap default settings and wait 10 minutes for the controls to stabilize.
2. If the display is still acting up, unplug the refrigerator for 3 to 5 minutes.
3. Plug back in and allow 24 hours for temperatures to fully normalize.
4. If you recently replaced the filter, reset the filter indicator.

Using the right reset prevents unnecessary parts replacement and helps you separate a simple control issue from a cooling or airflow problem (evaporator fan, temperature sensor, or control board).

Last updated: February 2026

The most common problems we see on Kenmore refrigerators like model 25370413415 are cooling issues, water leaks or moisture, ice maker and dispenser troubles, and unusual noises. Many of these start with airflow restrictions, doors not sealing, or normal defrost-cycle behavior described in the 25370413415 owner's manual.

• Not cooling or warm temperatures: dirty condenser coils, blocked vents, evaporator fan problems, or a defrost system issue.
• Runs too long: doors opened often, controls set too cold, hot room conditions, or a door slightly ajar (common on French door units).
• Water on the floor or inside: a clogged defrost drain, door left slightly open, or high humidity causing condensation.
• Frost buildup: door not sealing, frequent openings, or a defrost sensor/thermostat problem.
• Noises: fan blade rubbing ice, a failing fan motor, or normal compressor and defrost sounds.

1. Confirm the refrigerator is powered and the plug is fully seated.
2. Verify temperature settings are not set to “off” or too warm.
3. Check that both doors close fully and nothing is holding them open.
4. Look for heavy frost on the rear freezer panel (points to a defrost or airflow issue).
5. Clean condenser coils and make sure airflow around the cabinet is clear.

If your symptoms match, these model-compatible parts are common fixes:

• Door not sealing, moisture between doors: refrigerator door gasket 5304537408
• Warm fridge section, weak airflow, noise from freezer: refrigerator evaporator fan blade 5308000010
• Temperature swings or inconsistent cooling: refrigerator temperature sensor 240597220
• Frost/defrost complaints: refrigerator defrost bi-metal thermostat 5304521781 or refrigerator defrost sensor 808137001

Cooling, moisture, and noise problems often share the same root cause: restricted airflow or a poor door seal. Fixing those early helps protect food temperatures, reduces compressor run time, and prevents frost and condensation from coming back.

Last updated: February 2026

Accela Chill is a Kenmore feature that temporarily boosts cooling so the refrigerator compartment pulls down to the set temperature faster after you load groceries or open the doors a lot. On model 25370413415, use the control panel options described in the 25370413415 owner's manual.

• Runs for a limited time, then returns to normal cooling automatically.
• Helps recover temperature faster after restocking or frequent door openings.
• Can increase compressor and fan run time while it is active.
• Normal operating sounds can be more noticeable during the boost.
• Works best when doors stay closed after you turn it on.

Use Accela Chill when:

• You just put in a large grocery load.
• You are chilling drinks quickly.
• The refrigerator door has been opened repeatedly.

Skip it when:

• The refrigerator is already holding steady at your set temperature.
• You are troubleshooting a cooling problem (use normal settings first).

Faster temperature recovery helps keep food in a safer, more consistent temperature range after warm air enters the cabinet. If you are seeing temperature alarms or inconsistent cooling, check the control settings and “Before you call” troubleshooting steps in the 25370413415 owner's manual.

Last updated: February 2026

The ER IF (or Er IF) code on Kenmore Elite refrigerators, including model 25370413415, points to an ice maker fan (ice fan) airflow problem. That fan moves cold air through the freezer and up to the ice maker area; when airflow is blocked or the fan is failing, the control displays ER IF.

• Power reset: unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power.
• Make sure the freezer door closes fully and seals tightly.
• Look for frost or ice buildup around the ice maker air duct and fan cover.
• Confirm vents are not blocked by food packages.
• Listen for the ice fan: it should run when cooling is needed (often after the door has been closed for a short time).

If you find physical damage or heavy frost patterns that keep returning, these model-matched parts are often involved:

• Refrigerator evaporator fan blade 5308000010 (broken, warped, or rubbing)
• Refrigerator door gasket 5304537408 (torn, deformed, or not sealing)
• Refrigerator defrost sensor 808137001 (defrost feedback issues that can contribute to icing)

When the ice fan cannot move cold air correctly, the ice maker compartment warms up and ice production drops. The refrigerator may also run longer, build more frost, and struggle to hold stable freezer temperatures.

For control behavior, access, and any model-specific checks, follow the troubleshooting and component location guidance in the 25370413415 owner’s manual. For installation and airflow clearance guidance, use the 25370413415 installation guide.

Last updated: February 2026

Most Kenmore refrigerators, including model 25370413415, last 10 to 15 years with normal household use. Reaching the high end of that range depends on steady airflow, tight door seals, and keeping the cooling system clean and properly adjusted (see the 25370413415 owner's manual).

A refrigerator’s life is mostly determined by how hard the sealed system and fans have to work to hold temperature.

• 10 to 15 years is the typical service life for a modern refrigerator
• Heavy use (large family, frequent door openings) shortens life
• Poor ventilation around the cabinet increases compressor run time
• Dirty condenser area can cause warmer temps and extra wear
• Worn door gaskets let in humid air, increasing frost and run time

These steps reduce strain on the compressor, condenser fan, and evaporator fan.

• Keep the refrigerator level so doors close consistently
• Clean dust from the condenser area regularly
• Confirm doors seal tightly; replace a torn gasket if needed
• Replace filters on schedule so airflow and water flow stay normal
• Avoid overpacking; leave space for air circulation inside

A refrigerator that runs longer and steadier holds safer food temperatures and reduces expensive wear on major components like the compressor and control boards.

If you’re maintaining a water and ice system, follow the filter replacement guidance in the 25370413415 owner's manual. For step-by-step filter tips, use how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026