Kenmore 11029812890 washer Parts

To identify a Kenmore washer model like 11029812890, we look for the model and serial number plate on the washer cabinet. On this Kenmore top-load style, it’s commonly under the lid or on/near the back of the control panel; confirm the exact label location using the 11029812890 owner’s manual.

Where to look on Kenmore washer model 11029812890

Check these common label locations first:

• Under the washer lid, around the tub opening (top-load washers)
• On the back of the control panel console
• On the main cabinet, usually on a side panel near the bottom edge
• On the rear panel of the washer cabinet

What to write down (and why)

Record the full model number and serial number exactly as shown. We use both to match the correct Kenmore parts list, diagrams, and any model-specific variations.

• Model number: identifies the design family and parts used
• Serial number: identifies production run details that can affect part revisions
• Brand: Kenmore (helpful when searching manuals and parts)

You see this	Use it for	Example
Model number	Finding correct parts and diagrams	11029812890
Serial number	Confirming production variation	(varies by unit)

Why it matters

Kenmore model numbers can look similar, but small differences can change which parts fit. Using the exact model number helps avoid ordering the wrong items, especially for common repairs like a lid switch, drain pump, or agitator components.

Last updated: January 2026

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 11029812890, lifespan is driven most by load size, installation (leveling and drain setup), and routine care outlined in the 11029812890 owner's manual.

Typical lifespan range (what we see most often)

• Average: 10 to 15 years
• Shorter end (around 5 to 10 years): heavy use, frequent overloading, poor leveling, or chronic leaks
• Longer end (15 to 20+ years): moderate use, correct installation, and timely part replacement

Usage pattern	Expected lifespan	What usually shortens it
Light (1 to 3 loads/week)	12 to 18 years	Sitting unused with water left in hoses, corrosion
Average (4 to 7 loads/week)	10 to 15 years	Overloading, detergent overuse, vibration
Heavy (multiple loads/day)	7 to 12 years	Wear on drive system, pump, lid switch

How to help your 11029812890 reach the high end

• Keep loads loose and balanced; do not pack the basket
• Level the washer and tighten the front leg locknuts to reduce vibration
• Replace inlet hoses every 5 years and check for bulges or leaks
• Use the correct amount of detergent to prevent excessive suds
• Clean the washer interior periodically (hot cycle with detergent and chlorine bleach, as directed)

Parts that commonly affect “end of life” decisions

If performance drops, these are common wear items that can restore operation on many Kenmore top-load designs:

• Washer lid switch WP3949238 (won’t spin or won’t start symptoms)
• Washer drain pump WP3363394 (won’t drain, wet loads)
• Coupling 285753A (no agitation or no spin on direct-drive style systems)

Why it matters

Knowing the typical lifespan helps you decide when maintenance is worth doing. A simple fix (like a lid switch or drain pump) can often extend usable life and prevent secondary damage from leaks, vibration, or incomplete draining.

Last updated: January 2026

Kenmore is a brand name used on appliances sold by Sears; the actual replacement part for Kenmore washer model 11029812890 is made by the manufacturer that produced that specific component for this washer. The owner’s documentation for this model doesn’t identify a single OEM maker, so the most reliable approach is matching parts by model and part number.

How to get the correct replacement part for model 11029812890

Use the model number and the exact part listing for your washer, not the Kenmore name alone. The 11029812890 owner’s manual also reminds you to use the complete model number when requesting parts or service.

Key checks we recommend:

• Match model 11029812890 exactly (all digits).
• Confirm the part number/part ID listed for your model.
• Compare the old and new part for mounting points, connectors, and hose ports.
• If your washer has a model/serial plate, use it to confirm you’re ordering for the correct unit.
• Replace related wear items together when appropriate (for example, a leaking drain setup may involve hoses and clamps).

Examples of common replacement parts for this Kenmore washer

If you’re troubleshooting a symptom, these are examples of parts that are often involved on top-load washers like this one:

Symptom	Part to check	Example compatible part
Won’t spin or stops when lid opens	Lid switch	Washer lid switch WP3949238
Won’t drain or drains slowly	Drain pump	Washer drain pump WP3363394
Agitates/spins poorly, motor runs	Motor coupling	Coupling 285753A

Why it matters

Kenmore-branded appliances can use parts sourced from different manufacturers over time. Matching by model number and part number helps prevent ordering a look-alike part that doesn’t fit, leaks, or won’t connect correctly.

Last updated: January 2026