Kenmore 25367172508 refrigerator Parts

Yes. We still carry replacement parts for Kenmore refrigerators, including model 25367172508; you can match parts by model number and then choose the exact component you need (like a light bulb, door gasket, or fan parts) to restore proper cooling and door sealing.

How to find the right part for your Kenmore 25367172508

We recommend using the model number 25367172508 to ensure the part fits your top-mount refrigerator.

• Confirm the full model number from the rating label inside the fresh food section
• Use the parts list for 25367172508 to locate the exact diagram and part name
• Match by symptoms (no cooling, warm freezer, door not closing, dim light)
• Compare your original part to photos and descriptions before ordering
• Use the instructions in the 25367172508 owner's manual for model-specific handling and safety steps

Commonly replaced parts (examples for this model)

These are some frequently needed items that are available for 25367172508.

Symptom	Likely part to check	Example part on this model
Light out in fresh food section	Bulb or socket issue	Refrigerator light bulb 316538904
Door not sealing, frost, sweating	Worn or warped gasket	Refrigerator gasket 241872512
Warm refrigerator or noisy airflow	Fan blade or fan motor area	Refrigerator evaporator fan blade 5308000010

Why it matters

Using the correct Kenmore model-specific part helps prevent repeat failures, protects food temperatures, and reduces strain on the compressor and fans. A good door seal and proper airflow are especially important in a top-mount refrigerator.

Ordering options

You can order replacement parts for Kenmore 25367172508 directly from the parts list for this model, or search by model number on Sears PartsDirect if you are shopping for additional Kenmore refrigerator parts.

Last updated: February 2026

For a Kenmore refrigerator, the model number is printed on the serial plate inside the fresh food (refrigerator) compartment. On model 25367172508, the owner’s guide notes this plate is located inside the refrigerator compartment; record both the model and serial number for future parts and service needs. See the 25367172508 owner's manual for the exact label location and examples.

Where to look for the model number label

Check these common spots first (use a flashlight and look for a sticker or metal plate):

• Inside the refrigerator compartment on a side wall (most common)
• On the ceiling of the fresh food compartment near the light
• On the side wall behind or beside the crisper drawers
• Along the door frame when you open the refrigerator door
• Behind the lower kickplate or front grille (less common)

What to write down (and why)

When you find the serial plate, copy the information exactly as shown.

• Model number (for example: 25367172508)
• Serial number
• Purchase date (helpful for maintenance records)

Why it matters

The model number is what we use to match the correct Kenmore refrigerator parts list, diagrams, and compatible replacements (like a door gasket, evaporator fan blade, or light bulb).

Quick checklist: model number vs. serial number

Item	What it tells us	Used for
Model number	The exact refrigerator design and parts	Ordering correct parts and looking up diagrams
Serial number	The unit’s production identifier	Verifying production details and service records

Ordering parts once you have the model number

After you confirm your model number, order parts from the parts list for that exact model, or search by model number on Sears PartsDirect.

Last updated: February 2026

For Kenmore model numbers, we read the first 3 digits as the source (who built the appliance) and the remaining digits as the specific product design and variation. On Kenmore refrigerator model 25367172508, the 253 prefix identifies the manufacturing source, and the full number is what we use to match the correct parts and manual.

Where to find the model number on this refrigerator

For model 25367172508, the owner’s guide states the model and serial information is on the serial plate inside the refrigerator compartment. Use the exact full model number when ordering parts or looking up diagrams in the 25367172508 owner's manual.

• Look on the serial plate inside the fresh food (refrigerator) section
• Write down both the model number and serial number for reference
• Use the full model number (all digits) when searching parts
• If the label is hard to read, take a clear photo and zoom in

How Kenmore model numbers are structured (quick guide)

Kenmore model numbers are typically split into two useful chunks:

Model number section	Example (25367172508)	What it tells you	Why it matters
Prefix (first 3 digits)	253	Manufacturing source code	Helps identify the correct parts system and documentation family
Remainder (next digits)	67172508	Model design and variation	Narrows to the exact shelves, gaskets, motors, and other components

Why it matters when buying parts

Many Kenmore refrigerators look similar, but parts like a door gasket, evaporator fan blade, or light bulb can differ by variation. Using the full 25367172508 model number helps us match the correct replacement part the first time.

If you are ordering common wear items, you can also match by part ID from the parts list, such as the refrigerator light bulb 316538904 or the refrigerator gasket 241872512, then confirm fit by model number.

Helpful tips to avoid mix-ups

• Match the model number exactly; do not drop digits
• Confirm the part ID and part name before ordering
• Check the diagram location (fresh food section vs freezer section)
• Use Sears PartsDirect to search by the full model number if you are comparing multiple Kenmore appliances in your home

Why this matters

The model number is the fastest way to get the right Kenmore refrigerator parts, correct installation instructions, and the right troubleshooting steps for your exact configuration.

Last updated: February 2026

For Kenmore top-mount refrigerator model 25367172508, the overall cabinet size is typically about 32 in. wide, 65-3/4 in. high, and 26-5/8 in. deep (depth can vary slightly depending on door and handle configuration). For the exact installed clearances and leveling details, use the installation guide.

Dimensions to use for planning

Use these measurements when checking fit through doorways and into the cutout:

• Width: 32 in.
• Height: 65-3/4 in.
• Depth (cabinet): 26-5/8 in.
• Add space for: door swing, handle projection, and rear air clearance

What to measure at home (so the fridge fits)

Even with published specs, we recommend confirming your space and path:

• Measure the opening width at the front and back (walls are often not perfectly square)
• Measure height to the lowest cabinet/trim above the refrigerator
• Measure depth to the wall, then account for baseboards and the power cord
• Measure doorway widths and tight turns on the delivery path
• Plan for ventilation clearance behind and above the refrigerator

Quick reference table

Measurement	What it affects	What to allow for
Width	Cutout fit and side clearance	A little extra space so doors open freely
Height	Overhead cabinet clearance	Room to level the refrigerator
Depth	How far it sticks out	Door thickness, handle, and airflow behind

Why it matters

Correct sizing prevents poor door sealing, restricted airflow, and installation headaches. If the refrigerator is forced into a tight opening, the doors can bind, the gasket may not seal well, and cooling performance can suffer.

If you are also replacing a worn door seal while you are measuring and adjusting fit, the refrigerator gasket 241872512 is a common related part for this model.

You can order replacement parts for model 25367172508 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Most Kenmore refrigerators, including model 25367172508, last 12 to 15 years with normal household use. Consistent airflow, clean condenser areas, and quick fixes for door-seal or cooling-fan problems help you reach that typical service life.

What affects refrigerator lifespan most

A refrigerator lasts longer when the compressor runs less and the cabinet stays sealed.

• Dirty condenser area increases heat and compressor run time
• Poor ventilation around the cabinet traps heat
• Worn door gaskets leak warm, moist air and create frost
• Fan issues reduce airflow and cause temperature swings
• Overloading shelves can block vents and restrict circulation

Maintenance that extends life (high impact)

Use these habits to reduce wear on the sealed system and fans.

• Unplug the refrigerator; vacuum dust from the condenser area regularly
• Keep ventilation space around the refrigerator (especially behind it)
• Clean the gasket sealing surface; confirm doors close firmly
• Keep settings steady; avoid extreme cold settings that force constant running
• Investigate new noises early (rubbing, buzzing, clicking)

Quick “repair vs. replace” guide

Symptom	Common cause	Practical next step
Moisture, frost, or warm spots near door	Door not sealing	Inspect/replace gasket; check door alignment
Rattling in freezer area	Fan blade rubbing	Clear ice; replace blade if damaged
Heavy frost on back wall	Defrost problem	Check defrost components and airflow

Parts that often solve the wear-and-tear issues

• Torn or deformed seal: refrigerator gasket 241872512
• Freezer airflow noise: refrigerator evaporator fan blade 5308000010
• Frost tied to defrost cycling: refrigerator defrost bi-metal thermostat 5303918202

Why it matters

A refrigerator that runs longer than necessary uses more energy and puts extra load on the compressor; basic cleaning, ventilation, and door-seal care prevents premature cooling-system wear.

For model-specific care and safety details, use the 25367172508 owner's manual. To order parts for this refrigerator, use the parts list for model 25367172508 or search by model number on Sears PartsDirect.

Last updated: February 2026