How many cubic feet is a Kenmore 10656876601 refrigerator?
The Kenmore 10656876601 is a side-by-side refrigerator; units in this Kenmore 106 series are typically about 24 to 27 cubic feet. For the exact capacity for your specific configuration, use the specifications section in the owner's manual.
- Check the specifications pages in the owner's manual
- Look for the model and serial label inside the fresh food compartment (often on a side wall or ceiling)
- If the label lists liters (L), convert to cubic feet using the table below
- Match the full model number 10656876601 when comparing specs or ordering parts
| If the label shows | Multiply by | Result |
|---|---|---|
| Liters (L) | 0.0353 | Cubic feet (cu. ft.) |
| Refrigerator type | Typical capacity |
|---|---|
| Kenmore 106 series side-by-side | 24 to 27 cu. ft. |
| Large French door models | 28 to 31 cu. ft. |
Capacity affects how you compare refrigerators and plan storage. It also helps when you are choosing maintenance items and replacements that fit your layout, such as the refrigerator water filter EDR3RXD1.
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
The most common problems we see on Kenmore refrigerators like model 10656876601 are no cooling or warm temperatures, ice maker and dispenser issues, water leaks, excess frost or moisture, and unusual noises. Many of these trace back to airflow restrictions, water supply problems, or normal wear on key components.
- Not cooling or temperature swings: dirty condenser coils, blocked vents, evaporator fan problems, or control issues
- Ice maker not making ice: water supply shutoff closed, kinked water line, ice maker switched off, or a new install that needs time
- Ice tastes bad or looks discolored: old ice, odor transfer from food, or a filter that needs flushing/replacement
- Water leaking or puddles: clogged/iced drain, loose water line connections, or dispenser/ice maker supply issues
- Noisy operation: normal sounds (buzzing, pulsating, sizzling) or rattling from items touching the cabinet
- Confirm the unit is plugged into a grounded 3-prong outlet and the breaker is not tripped.
- Set controls slightly colder; recheck temperatures in 24 hours.
- Make sure doors close fully; reduce door openings to limit moisture buildup.
- If ice is slow after setup, wait 24 hours for initial ice and up to 72 hours for full production.
- Verify the water shutoff valve is fully open and the supply line is not kinked.
If basic checks do not resolve the issue, these model-compatible parts are commonly involved:
| Problem area | What you notice | Example part for 10656876601 |
|---|---|---|
| Water quality and flow | slow water, bad-tasting ice | Genuine Kenmore refrigerator water filter EDR3RXD1 |
| Ice production | no ice or small batches | Refrigerator ice maker WPW10190961 |
| Cooling airflow | warm fridge, freezer OK, fan noise changes | Refrigerator evaporator fan motor WP2315549 |
| Defrost system | heavy frost, warm temps over time | Refrigerator defrost bi-metal thermostat WPW10225581 |
Catching the symptom early helps prevent food spoilage, reduces compressor run time, and avoids secondary problems like moisture buildup, frost blockage, and dispenser clogs.
- Use the troubleshooting section in the 10656876601 owner's manual for power, noise, temperature, and ice/water checks.
- For filter selection and replacement steps, follow how to replace the water filter in a Kenmore refrigerator.
Last updated: February 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore model 10656876601 side-by-side refrigerators, the model number is printed on the appliance identification label inside the fresh food (refrigerator) compartment. Open the refrigerator door and look along the interior side wall near the front edge for a sticker that lists both the model and serial information; confirm the exact format in the 10656876601 owner's manual.
- Open the refrigerator (fresh food) door, not the freezer door.
- Check the inside cabinet wall near the front frame.
- Look around crisper drawer height and the upper side walls.
- Scan the door jamb area where the door gasket seals.
- Use a flashlight; labels can be low-contrast or partially covered.
Most Kenmore refrigerator ID labels include both a model number and a serial number. The serial number format varies by production run, but it is usually a mix of letters and numbers.
| Item on label | What it’s used for | Why you need it |
|---|---|---|
| Model number (example: 10656876601) | Identifies the exact refrigerator design | Ensures parts diagrams and parts fit match your unit |
| Serial number | Identifies the production unit and date code | Helps confirm correct revisions and compatible replacement parts |
Using the exact model number helps us match the correct Kenmore side-by-side refrigerator parts for your unit, such as the correct water filter, ice maker, door bins, and electronic controls.
Last updated: February 2026





