How big is the Whirlpool model ED5HVEXVB02?
The Whirlpool ED5HVEXVB02 is a full-size side-by-side refrigerator. Most Whirlpool side-by-side models of this style measure about 35 1/2 inches wide, 69 to 70 inches tall, and 33 to 35 inches deep (depth varies most depending on handles and door swing). For the exact published dimensions for your unit, check the ED5HVEXVB02 owner's manual.
What to measure (so you get the right fit)
Use a tape measure and record these before ordering parts or planning a move:
- Width: cabinet edge to cabinet edge (and a second measurement including handles)
- Height: floor to top of hinge cover (or highest point)
- Depth: cabinet only, then cabinet plus handles
- Door swing clearance: space needed to fully open both doors
- Ventilation clearance: space behind and above the refrigerator
Typical size ranges for this Whirlpool side-by-side style
These ranges match what we commonly see for Whirlpool side-by-side refrigerators like ED5HVEXVB02.
| Measurement | Typical range | What changes it most |
|---|---|---|
| Width | 35 to 36 in. | Cabinet design, trim |
| Height | 69 to 70 in. | Hinge/leveling leg adjustment |
| Depth | 33 to 35 in. | Handles, door thickness |
Why it matters
Correct dimensions help prevent installation problems like doors hitting walls, poor airflow that reduces cooling performance, and water line kinks that can affect the dispenser and ice maker.
Quick tip if you are replacing parts
If you are working on water or ice issues while you are measuring, the correct filter and water system parts for ED5HVEXVB02 are listed for this model, including the refrigerator water filter housing WPW10121138 and the refrigerator inlet valve W10408179.
Last updated: February 2026
How do I find the model number on my ED5HVEXVB02?
On a Whirlpool ED5HVEXVB02 side-by-side refrigerator, the model number is printed on the appliance’s rating label. We typically find it inside the fresh food compartment on a side wall or near the door opening, and it matches the full model exactly.
Where to look on the refrigerator
Check these common label locations first:
- Inside the refrigerator section on the left or right wall
- Along the front frame near the door gasket (at the door opening)
- Behind the crisper drawers on the side wall
- On the ceiling area inside the fresh food compartment
What the label looks like
The rating label usually includes:
- Model number (for example, ED5HVEXVB02)
- Serial number
- Electrical ratings (volts/amps)
- Sometimes a bar code
Why the exact model number matters
Whirlpool often uses similar-looking model families, but parts can vary by revision. Using the exact model number helps ensure the right fit for items like a water filter, ice maker, inlet valve, or defrost components.
| You need it for | Example |
|---|---|
| Ordering parts | Matching the correct ice maker or water filter housing |
| Using diagrams | Finding the right section and part callouts |
| Troubleshooting | Following the correct wiring and test steps |
If the label is hard to read
- Wipe it gently with a damp cloth and dry it
- Use your phone camera zoom and good lighting
- Copy the model number exactly, including any suffix characters
For a model-specific reference to labeling and documentation, use the ED5HVEXVB02 owner's manual. You can also use our guide: how to find your appliance model number (and what it means for parts).
Last updated: March 2026
What are the most common issues with ED5HVEXVB02?
The most common issues we see on the Whirlpool ED5HVEXVB02 side-by-side refrigerator are warm temperatures from airflow or defrost problems, ice maker or dispenser failures, and water dispensing leaks or low flow. Many fixes start with basic checks, then testing key cooling and water-system parts.
Common symptoms and what they usually point to
- Fridge or freezer not cold enough: dirty condenser coils, evaporator fan not running, defrost system issue
- Frost buildup on the back wall of the freezer: defrost heater, defrost timer, or defrost thermostat problem
- Ice maker not making ice: water supply issue, inlet valve problem, ice maker module failure
- Water dispenser slow or not dispensing: clogged filter, frozen water tube, weak inlet valve
- Door not closing or popping open: hinge/cam wear, door alignment issue
Parts that commonly solve these problems
If troubleshooting points to a failed component, these model-matched parts are frequent replacements:
| Problem area | What fails | Example part for ED5HVEXVB02 |
|---|---|---|
| Defrost system | Heater or timer | Refrigerator defrost heater WP2323198 or refrigerator defrost timer W10822278 |
| Air circulation | Evaporator fan motor | Refrigerator evaporator fan motor WP2315549 |
| Water and ice | Inlet valve or filter | Refrigerator inlet valve W10408179 or everydrop ice & water refrigerator filter 3 - refrigerator filtration part by Whirlpool EDR3RXD1 |
Quick checks we recommend before replacing parts
- Confirm freezer is near 0°F and fresh food is near 37°F (use a thermometer)
- Make sure vents are not blocked by food packages
- Clean condenser coils and verify the condenser fan runs (if equipped)
- Check for a solid frost sheet on the evaporator cover (classic defrost clue)
- For water issues, verify household water supply is fully open and line is not kinked
Why it matters
Cooling, defrost, and water-delivery problems can look similar (warm temps, no ice, leaks). Narrowing the symptom first helps you avoid replacing the wrong part and gets your ED5HVEXVB02 back to stable temperatures faster.
For model-specific diagrams and troubleshooting steps, use the ED5HVEXVB02 owner's manual.
Last updated: March 2026





