Kenmore 79568032215 refrigerator Parts

Your Kenmore refrigerator’s model number is printed on the appliance’s rating label. On Kenmore model 79568032215 top-mount refrigerators, that label is typically inside the fresh food compartment or freezer compartment, often on a side wall, near the crisper area, or behind the lower kickplate. Use the exact model number to match parts and diagrams in our owner's manual.

Check these common spots in this order:

• Inside the refrigerator compartment on the left or right side wall
• Inside the refrigerator compartment behind or beside the crisper drawers
• Inside the freezer compartment on a side wall
• On the door frame (visible when the door is open)
• Behind the lower front kickplate or toe grille
• On the back exterior panel near the power cord

The label usually includes a few different identifiers. For ordering parts, we recommend recording:

• Model number (most important)
• Serial number (helps confirm production run)
• Manufacturing date (if shown)

Kenmore model numbers can look similar, but small differences can change the correct door gasket, shelf, control board, or defrost parts. Using the exact model number helps ensure you get the right replacement the first time.

Last updated: February 2026

Yes. You can still get replacement parts for Kenmore refrigerators, including model 79568032215. We list model-matched parts such as door gaskets, shelves, door bins, switches, and cooling-system components; use the 79568032215 owner's manual to confirm the correct part location and fit before ordering.

Use your model number (79568032215) first, then match by part name and ID.

• Identify the symptom (leaking, warm temps, door not closing, light not working)
• Confirm which compartment is affected (fresh food vs. freezer)
• Compare the part description to what you see on the refrigerator
• Check for left/right or upper/lower placement differences
• Verify mounting style and connector type before you buy

These are examples of parts available for Kenmore 79568032215 that often solve everyday issues:

Using model-specific parts helps restore proper temperature control, reduces frost and leaks, and prevents extra wear on components like the evaporator fan motor and electronic control board.

• Unplug the refrigerator before replacing electrical parts (switches, boards, fan motors)
• Protect floors and food; keep doors closed as much as possible during repairs
• After gasket or door work, recheck door alignment and sealing all the way around

Last updated: February 2026

Your Kenmore refrigerator model 79568032215 has a specific factory-rated capacity (cubic feet), but the most accurate way to confirm it is to read the rating plate inside the fresh food section or freezer, then cross-check the specifications listed in the 79568032215 owner's manual.

Use these methods in order; the first one is the most reliable.

• Check the rating plate (usually on an inside wall of the refrigerator compartment or near a crisper drawer). Look for “Capacity” or “Total capacity” in cu. ft.
• Use the manual specs page; it typically lists total capacity and sometimes breaks it into refrigerator and freezer sections (see the 79568032215 owner's manual).
• Measure and estimate only if you cannot access the label (helpful for planning space, not for exact specs).
• Compare to typical sizes: most Kenmore top-mount refrigerators are commonly in the 18 to 22 cu. ft. range.

If you are trying to plan storage or compare sizes, you can estimate interior volume.

• Measure interior width, height, and depth (in inches) of the usable space.
• Multiply to get cubic inches.
• Divide by 1,728 to convert to cubic feet.
• Subtract a little for shelves, bins, and air channels.

Capacity affects how much food you can store, but it also helps when comparing models, planning kitchen layout, and choosing organization parts like door bins and shelves that fit your exact configuration.

Last updated: February 2026

Most Kenmore refrigerators, including top-mount models like 79568032215, typically last 10 to 15 years with normal household use. Regular maintenance and quick fixes (like replacing a worn door gasket or a failed door switch) help you reach the high end of that range.

A refrigerator’s life is mostly determined by how hard the sealed system and fans have to work to hold temperature.

• 10 to 15 years is the typical lifespan for a household refrigerator
• Heavy use, hot garages, and dusty environments can shorten lifespan
• Good airflow, clean coils, and tight door seals can extend lifespan
• Replacing small wear parts early often prevents bigger failures

Use these habits to reduce compressor run time and prevent icing, leaks, and temperature swings.

• Keep door gaskets clean and sealing evenly; replace if torn or warped (example: lg refrigerator door gasket ADX52752648)
• Confirm the interior light turns off when the door closes; a bad switch can add heat and raise run time (example: lg refrigerator door switch 6600JB1010A)
• Keep vents inside the refrigerator and freezer clear of food packages
• Set stable temps (most homes do best around 37°F fresh food and 0°F freezer)
• Address water under the fridge quickly; a clogged drain can lead to icing and airflow problems

Use this simple rule of thumb to decide whether a repair makes sense.

A refrigerator that runs longer than it should (air leaks, warm light, restricted airflow) puts extra strain on the compressor and evaporator system. Fixing simple issues early can prevent food spoilage, frost buildup, and premature compressor wear.

For model-specific care and cleaning steps, follow the owner's manual.

Last updated: February 2026

Common problems we see in Kenmore Elite refrigerators include warm temperatures (cooling failure), water leaks, excessive frost, noisy operation, and ice maker or dispenser issues. On Kenmore model 79568032215, these symptoms are often tied to airflow restrictions, a clogged defrost drain, worn door gaskets, or a failing fan or control component; use the owner's manual for model-specific checks and settings.

• Not cooling or uneven cooling: blocked air vents, dirty condenser area, evaporator fan problems, or a damper issue
• Water pooling inside or under the unit: defrost drain restriction or a drain tube problem
• Frost buildup on the back wall or in the freezer: defrost heater or defrost system issue
• Door not closing well: gasket not sealing, hinge wear, or door alignment problems
• Lights not working or door alarm issues: door switch problems

1. Confirm temperature settings and allow 24 hours after any adjustment.
2. Make sure food packages are not blocking return vents between compartments.
3. Inspect door seals for gaps, tears, or areas that do not grip paper when the door is closed.
4. Look for ice or debris at the drain opening; clear it and flush with warm water if accessible.
5. Listen for the evaporator fan (freezer) and condenser fan (rear/bottom area) running.

Cooling, defrost, and airflow problems tend to cascade: a small air restriction or drain issue can lead to frost buildup, warmer temperatures, longer run times, and higher energy use. Catching the symptom early helps prevent food spoilage and repeat icing or leaking.

If your refrigerator is showing an error code, use our Kenmore 795 model bottom freezer refrigerator error codes guide to interpret the display and narrow the troubleshooting path.

Last updated: February 2026