Kenmore Elite 66513964K013 undercounter dishwasher Parts

Yes. You can still get replacement parts for a Kenmore dishwasher, including the Kenmore Elite 66513964K013, by matching the exact model number to the correct parts list and diagrams. Commonly replaced items include rack components, filters, pumps, inlet valves, and door seals; use the owner's manual to confirm the right part for your symptom.

How to make sure you order the right part

Kenmore dishwashers often have multiple versions that look similar, so we recommend verifying the model number and then confirming the part by location in the diagrams.

• Match the full model number: 66513964K013
• Compare the part name and part ID, not just the description
• Check whether the issue is mechanical (rack/door) or water-related (fill/drain)
• Inspect for visible wear: cracks, rust, broken clips, or loose rollers
• Confirm compatibility before installing electrical or water parts

Common parts customers replace on model 66513964K013

If your dishwasher is leaking, not draining, not filling, or the racks are hard to roll, these are frequent fixes for this model.

Symptom	Likely area	Example part for this model
Lower rack won’t roll smoothly	Rack wheels/rollers	Dishwasher dishrack roller assembly, lower WPW10195417
Not draining or standing water	Drain system	Dishwasher drain pump (WPW10348269) or drain hose (8269144A)
Not filling or fills slowly	Water supply	Dishwasher water inlet valve W11175771
Poor cleaning, debris in tub	Filtration/spray	Dishwasher filter W10872845 or spray arm (WPW10195601)
Drips at the bottom of the door	Door sealing	Seal WPW10497235

Why it matters

Using the correct model-matched part prevents repeat failures, leaks, and fit issues. It also saves time during installation because the mounting points, electrical connectors, and hose sizes are designed for the exact Kenmore Elite configuration.

Last updated: February 2026

Kenmore model numbers are read left to right; the full model number identifies the exact design so we can match the correct parts and manuals. For your Kenmore Elite undercounter dishwasher, the model number is 66513964K013; use the complete number (including the suffix) when looking up parts in the owner's manual.

What each part of a Kenmore model number usually means

Most Kenmore model numbers have a prefix plus a series of digits/letters:

• Prefix (often the first 3 digits): identifies the manufacturing source for the appliance line.
• Middle digits: identify the base platform or design family.
• Suffix (ending digits/letters): identifies feature packages, color/finish, or production revisions.

Quick example using your dishwasher

Section	Example	What it’s used for	Why you should care
Model number	66513964K013	Full identification	Ensures parts fit and manuals match
Prefix	665	Source identifier	Helps narrow down compatible components
Suffix	K013	Revision/variation	Prevents ordering a similar but incorrect part

Where to find the model number on a dishwasher

On most Kenmore dishwashers, the model/serial tag is typically located in one of these spots:

• Along the inside edge of the door
• On the door frame (left or right side)
• On the tub rim near the latch area
• Occasionally behind the lower kick plate area

Why it matters for parts and troubleshooting

A single digit or suffix change can mean different racks, pumps, or electrical parts. Using the exact model number helps us match items like a drain pump, water inlet valve, or rack hardware to the correct configuration.

Common parts that are model-sensitive

Part type	What can differ by model variation
Rack hardware	Wheel/roller style, adjuster design
Water system	Inlet valve mounting and electrical connector
Drain system	Hose routing, pump style
Controls	Control board version and wiring

Last updated: February 2026

For a Kenmore Elite undercounter dishwasher like model 66513964K013, the model number is typically printed on a rating label around the door area. Open the door fully and check the inner door edge or the tub frame just inside the opening; match the full model string exactly when ordering parts or using the owner's manual.

Where to look on a Kenmore Elite dishwasher

Check these common label locations first:

• Along the top or side edge of the inner door (visible when the door is open)
• On the tub frame just inside the opening (left or right side)
• Behind the toe-kick (lower access) panel area (label may be on the frame)
• On the side of the door near the hinges

What the model number looks like (and why it matters)

Kenmore dishwasher model numbers are usually a long number string. For this page, the correct format is 66513964K013 (all characters matter). Using the exact model number ensures the right fit for parts like a rack adjuster, drain pump, or water inlet valve.

Quick check table

What you see on the label	What to do with it
Model number (example: 66513964K013)	Use it to match parts and diagrams for your exact dishwasher
Serial number	Useful for age tracking and service records, not for part fit
Type or code	Ignore for ordering parts unless the manual asks for it

Tips for using the model number to get the right parts

Once you find the label, we recommend:

• Write the model number down exactly, including any suffix letters/numbers
• Take a clear photo before the label gets worn or unreadable
• Use the model number when selecting common replacement parts such as the dishwasher water inlet valve W11175771 or dishwasher drain pump WPW10348269

Why it matters

Kenmore Elite dishwashers often share similar styling across multiple models, but internal components (like the pump, heater, and rack hardware) can vary by model number. Using 66513964K013 prevents ordering a part that looks right but does not mount or connect correctly.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore Elite dishwasher like model 66513964K013 when the problem is a common wear item (rack hardware, drain issues, fill issues) and the repair cost stays well below the price of a replacement. For major electrical or motor failures, the decision depends on total parts cost and the dishwasher’s overall condition.

Quick way to decide (cost vs. benefit)

Use this checklist before you buy parts:

• If the dishwasher is cleaning well and the tub is solid, repairs are typically a good value.
• If the issue is a single, clear failure (won’t drain, won’t fill, rack won’t roll), repair is usually straightforward.
• If you’re replacing multiple high-cost assemblies at once, replacement often makes more sense.
• If you have active warranty coverage, factor in what parts may be covered.
• If the door won’t stay balanced or racks are failing, those are common, fixable problems.

Common repairs that are usually “worth it” on 66513964K013

These are frequent, targeted fixes that can restore normal operation:

• Won’t drain: check for clogs first; then consider a drain pump such as the dishwasher drain pump WPW10348269.
• Won’t fill or fills slowly: verify water supply and inlet screen; then consider the dishwasher water inlet valve W11175771.
• Poor drying or water not heating: heating circuit issues can involve the dishwasher heater W10703867.
• Racks falling off track or rolling poorly: replace worn rack hardware like the dishwasher dishrack roller assembly, lower WPW10195417 or dishrack adjuster kit W10712394.

Repair cost comparison (typical guidance)

Repair type	Typical effort	Typical value outcome
Rack rollers/adjusters	Low	High (cheap, noticeable improvement)
Drain hose or drain pump	Low to medium	High (restores basic function)
Water inlet valve	Medium	High (restores fill and wash performance)
Control board or pump and motor	Medium to high	Depends on total cost and condition

Why it matters

A dishwasher that won’t drain, won’t fill, or has failing rack components often looks “done,” but those problems are commonly isolated to a single part. Fixing the right component can extend the life of your Kenmore Elite and avoid the hassle of a full replacement.

Use the documentation to confirm symptoms first

Before ordering parts, we recommend matching your symptoms to the troubleshooting steps and installation notes in the owner's manual and the installation guide. This helps you rule out simple causes like a kinked drain hose, a blocked filter area, or an installation clearance issue.

Last updated: February 2026

Common problems with the Kenmore Elite 66513964K013 dishwasher include not starting or stopping mid-cycle (often a door-latch or power issue), poor cleaning from clogged filtration or spray-arm blockage, draining problems from a kinked/blocked hose or weak pump, and hard-water residue or odors from maintenance and detergent issues. For model-specific troubleshooting steps, use the owner's manual.

Most common symptoms and what usually causes them

• Dishwasher does not run or won’t start: door not fully closed/latched, Start/Resume needs to be pressed, or a tripped breaker/fuse.
• Detergent remains in the dispenser: door not latching, or large items interfering with the wash system so the cycle pauses or can’t complete properly.
• Not draining: disposer knockout plug not removed (if connected), kinked drain hose, food blockage in drain/disposer, or a failing drain pump.
• Hard-water film or white residue: very hard water, not using rinse aid, or filters needing regular cleaning.
• Dirty dishes or suds: wrong detergent type (hand dish soap), too much detergent, or rinse aid cap left off.

Quick checks we recommend before replacing parts

1. Confirm the door closes firmly and the Start/Resume behavior matches the manual.
2. Verify household power: check the breaker/fuse and that the dishwasher has power.
3. Check for loading interference (cookie sheets, cutting boards, large casserole dishes) that can prevent proper door closure or spray.
4. Inspect the drain path: disposer inlet knockout (if used), drain hose routing, and clogs.
5. Address water quality and chemistry: incoming water should be about 120°F, use fresh dishwasher detergent, and use rinse aid.

Parts that commonly solve these problems (when a failure is confirmed)

Symptom	Part that often relates	Example part for this model
Not draining	Drain pump or drain hose	Dishwasher drain pump WPW10348269, dishwasher drain hose 8269144A
Not filling or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771
Poor cleaning	Spray arm or filter restriction	Dishwasher spray arm WPW10195601, dishwasher filter W10872845

Why it matters

Catching simple issues early (door latch closure, drain hose kinks, filter cleaning, correct detergent) prevents repeat cycle interruptions, standing water, and mineral buildup that can reduce cleaning performance and strain the pump and motor.

Last updated: February 2026