Owner’s manual
Error Codes
How to tell cubic feet of Kenmore refrigerator by model number?
For Kenmore model 10657362703, the model number by itself usually does not state the exact cubic-foot capacity. The most reliable way is to look up the capacity in the specs section of the owner's manual, or calculate an estimate from the usable interior dimensions.
Fast ways to find capacity for model 10657362703
- Check the specifications section in the owner's manual for listed capacity (refrigerator, freezer, and total).
- Look for a tech/spec sheet stored behind the toe grille or inside the control housing (common on many Kenmore side-by-side models).
- If you only need a close estimate, measure the usable interior space and calculate cubic feet.
- If you are comparing filters or water system parts, use the model number to match parts like the genuine Kenmore refrigerator water filter EDR3RXD1.
How to calculate cubic feet (good estimate)
- Empty one compartment (fresh food or freezer) enough to measure.
- Measure usable interior:
- Height (inches)
- Width (inches)
- Depth (inches)
- Multiply:
H x W x D = cubic inches - Convert to cubic feet:
cubic inches ÷ 1728 = cubic feet
Quick conversion table
| What you have | Convert to | Formula |
|---|---|---|
| Inches (H x W x D) | Cubic inches | H x W x D |
| Cubic inches | Cubic feet | ÷ 1728 |
What to measure (so the number makes sense)
- Measure inside wall to inside wall, not the outside cabinet.
- Subtract space taken by fixed components (air ducts, light housings, ice maker area) because they reduce usable volume.
- Add the refrigerator and freezer results to get total capacity.
Why it matters
Cubic feet helps you compare storage space between refrigerators, but it also affects real-world performance expectations like how full you can pack shelves while still allowing airflow for even cooling.
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
The most common problems we see on Kenmore refrigerators like model 10657362703 are cooling issues, ice maker or dispenser trouble, water leaks, frost buildup, and unusual noises. Many of these come down to airflow being blocked, normal defrost water movement, or a worn water-system component; the 10657362703 owner's manual troubleshooting section helps narrow it fast.
Most common symptoms and what usually causes them
- Not cooling or warm temperatures: blocked vents, dirty condenser area, evaporator fan or defrost problem
- Freezer cold but fresh food warm: airflow from freezer to refrigerator blocked (vents or overpacked shelves)
- Ice maker not making ice: water supply issue, clogged filter, or ice maker failure
- Water dispenser slow or no water: clogged filter, low house water pressure, or inlet valve issue
- Water leaking: loose water line, cracked filter housing, or defrost drain issue
- Noises (popping, running water, fan sounds): often normal refrigerant flow and defrost-cycle sounds
Quick checks we recommend first (before replacing parts)
- Confirm both controls are at the factory mid-settings (a good baseline).
- Make sure air vents are not blocked; the manual notes blocked vents cause temperature and moisture problems.
- After any change (new install, control adjustment, door left open), allow 24 hours for temperatures to stabilize.
- If water or ice performance changed after a filter swap, flush the water system.
- Listen for the type of noise; some sounds are normal during operation and defrost.
Common part fixes for this model
| Problem area | Part that often solves it | When it is a good match |
|---|---|---|
| Bad-tasting/slow water, weak ice production | Genuine Kenmore refrigerator water filter EDR3RXD1 | Filter is overdue or flow dropped noticeably |
| No water to dispenser/ice maker | Refrigerator inlet valve W10408179 | Water supply is on but valve is not opening reliably |
| Ice maker not cycling or not producing | Refrigerator ice maker WPW10190965 | Mold stays dry and basic water supply checks pass |
Why it matters
Cooling and ice/water problems often share the same root causes: airflow (vents and fans) and water flow (filter, valve, housing). Fixing the underlying restriction prevents repeat failures and helps food stay at safe temperatures.
Last updated: February 2026
What is the average lifespan of a Kenmore 10657362703 refrigerator?
A Kenmore side-by-side refrigerator like model 10657362703 typically lasts 10 to 15 years. Regular maintenance (cleaning condenser coils, keeping door seals tight, and changing the water filter on schedule) helps you reach the upper end of that range.
Typical lifespan and what affects it
Most refrigerators fail early due to heat stress, airflow problems, or sealed-system wear. These factors have the biggest impact:
- Condenser coil cleanliness (dirty coils make the compressor run hotter and longer)
- Door gasket condition (air leaks cause longer run times and frost issues)
- Room temperature and ventilation (tight cabinets and hot garages shorten life)
- Ice maker and dispenser use (more cycling and water system wear)
- Water filter changes (protects water flow and reduces valve strain)
Maintenance checklist that extends life
We recommend these habits for Kenmore 106-prefix side-by-sides:
- Vacuum and brush condenser coils every 6 to 12 months
- Keep freezer at 0°F and refrigerator at 37°F to 40°F
- Confirm doors close fully; replace worn gaskets if you feel air leaks
- Replace the water filter about every 6 months (or sooner with slow flow)
- Level the refrigerator so doors self-close and seals seat evenly
Common “repair vs. replace” decision guide
| If your refrigerator is… | Usually makes sense to… |
|---|---|
| Under 8 years old | Repair most issues (especially fans, valves, ice maker) |
| 10 to 15 years old | Compare repair cost vs. overall condition |
| Over 15 years old | Replace if the compressor or sealed system fails |
Why it matters
A refrigerator near the end of its expected lifespan is more likely to develop cooling swings, frost buildup, or ice and water dispenser problems. Staying ahead of airflow and filtration maintenance reduces compressor run time and helps prevent expensive breakdowns.
For model-specific care steps and troubleshooting, use the owner's manual. If you are due for filtration service, the genuine Kenmore refrigerator water filter EDR3RXD1 is a common maintenance item for this model.
Last updated: February 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10657362703, the model number is printed on the appliance identification label inside the fresh food (refrigerator) compartment. Open the refrigerator door and look along the interior walls near the top or around the crisper area; the label lists both the model and serial number. See the 10657362703 owner's manual for the exact label location diagram.
How to find it quickly
- Open the refrigerator (fresh food) door, not the freezer door.
- Look on the left or right interior wall near the top front.
- Check around the crisper drawer frame area if you do not see it up high.
- Look for a white or silver label with MODEL and SERIAL fields.
- Write the model number exactly as shown (letters and numbers).
What the label typically includes
| Label field | What it’s used for | Example for this unit |
|---|---|---|
| Model number | Ordering correct parts and checking fit | 10657362703 |
| Serial number | Identifying production run details | Varies by unit |
| Electrical ratings | Verifying power requirements | Listed on label |
Why it matters
We use the model number to match the correct Kenmore parts diagrams and compatible replacement parts (like a refrigerator water filter, ice maker, or door gasket). Even small model-number differences can change which parts fit.
Last updated: February 2026
