Kenmore 10660233904 refrigerator Parts

Kenmore model numbers are read as a prefix plus a base model and suffix; on Kenmore refrigerator model 10660233904, the 106 prefix identifies the manufacturing source, and the remaining digits narrow down the exact top-mount configuration and color/feature variation. For the most accurate identification, match the full model number exactly as shown on the rating label and in the 10660233904 owner's manual.

We typically see the model and serial tag in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the refrigerator compartment near the control area
• Along the door frame (fresh food door)
• On the back exterior panel (less common)

Kenmore model numbers are usually easiest to interpret in three chunks.

Even small differences in the last digits can change which door gasket, control, or fan motor fits. When ordering parts for 10660233904, we recommend:

• Copy the model number exactly (all digits, no spaces)
• Use the model number when browsing the parts list for this refrigerator
• Confirm the part description matches your symptom and location on the unit
• Cross-check diagrams and notes in the 10660233904 owner's manual

• Door gaskets and gasket panels
• Electronic control components
• Evaporator fan components
• Shelves and crisper pans

Reading the model number correctly prevents ordering the wrong replacement part and helps you troubleshoot faster, especially on cooling and airflow issues where multiple similar-looking parts exist.

Last updated: February 2026

For Kenmore model 10660233904, the most accurate way to get the exact cubic-foot capacity is to use the model’s specifications in the 10660233904 owner's manual or read the rating plate inside the fresh food section. Capacity can vary across closely related 106.6023* models.

• Check the rating plate inside the refrigerator compartment (often on a side wall or near the crisper area); it typically lists capacity and electrical ratings.
• Look up the specs in the manual for your exact model series using the 10660233904 owner's manual.
• Estimate by measuring interior space (useful if the label is missing): measure usable width, depth, and height of the fresh food and freezer sections, then convert to cubic feet.

1. Measure usable interior dimensions in inches (do not count door bins, thick insulation, or unusable corners).
2. Multiply: width x depth x height to get cubic inches.
3. Convert to cubic feet: divide by 1,728.

Most Kenmore top-mount refrigerators in the 106 model family commonly fall in this range:

• About 14 to 22 cubic feet total
• Freezer space is often about 4 to 7 cubic feet within that total

Knowing cubic feet helps us match the right accessories and parts (shelves, bins, door gaskets) and set realistic expectations for cooling recovery after door openings or power interruptions.

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life with normal household use. For your Kenmore 10660233904 top-mount refrigerator, routine care (airflow, clean coils, good door sealing) and timely part replacement are what most directly determine whether it lands closer to 10 years or pushes beyond 15.

• Condenser coil cleanliness (dirty coils make the compressor work harder)
• Door gasket condition (air leaks cause longer run times and moisture issues)
• Evaporator fan performance (poor airflow leads to warm temps and frost problems)
• Stable temperatures (avoid frequent warm-ups from propped doors or overloading)
• Fast response to symptoms (noise, frost buildup, warm fridge section)

Model-matched parts we commonly see replaced on this refrigerator include the evaporator fan motor and door gaskets, depending on the symptom.

• Vacuum the condenser area regularly (more often with pets)
• Keep vents inside the refrigerator and freezer clear
• Confirm doors close on their own and sit level
• Clean and inspect gaskets; replace if torn, hardened, or warped
• Address airflow noises or warming quickly (fan and defrost issues tend to cascade)

For model-specific care and operating guidance (including troubleshooting sections), follow the 10660233904 owner's manual.

A refrigerator usually fails early from heat and run-time stress (dirty coils, air leaks, blocked airflow). Keeping the sealed system from overworking is the most reliable way to reach the typical 10 to 15 year lifespan.

Last updated: February 2026