Kenmore Elite 79579733900 refrigerator Parts

Most Kenmore Elite refrigerators, including model 79579733900, typically last 10 to 15 years with normal household use. With consistent maintenance and quick repairs of small issues, it is common to reach the upper end of that range.

A refrigerator’s life is usually determined by how hard the sealed system works and how well airflow and door sealing are maintained.

• Condenser coil cleanliness (dirty coils make the compressor run hotter and longer)
• Door seal condition and door alignment (warm air leaks increase run time)
• Ice maker and water system leaks (can cause icing, clogs, and corrosion)
• Fan performance (poor airflow can lead to warm temps and frost buildup)
• Room conditions (high ambient heat and tight clearances shorten life)

We recommend these habits to help a Kenmore Elite bottom-mount refrigerator reach its expected lifespan:

• Vacuum and brush the condenser area every 6 to 12 months
• Keep doors closing squarely; avoid overloading door bins
• Set temps to typical targets: 37°F fresh food, 0°F freezer
• Replace water filters on schedule and purge air after changes
• Clear frost and address water puddles quickly (often a drain issue)

Model 79579733900 uses serviceable components that can restore performance when symptoms start, such as the refrigerator evaporator fan motor 4681JB1027C or the refrigerator drain tube 5251JA3003D. For model-specific maintenance steps and access panels, follow the 79579733900 owner's manual.

A refrigerator that runs longer cycles to hold temperature uses more energy and puts extra wear on the compressor and fans, which are among the most expensive repairs.

Last updated: January 2026

If your Kenmore Elite 79579733900 is warm at the bottom, the most common causes are restricted airflow (blocked vents or an iced-up evaporator area) or poor heat removal from dirty condenser coils. Start with cleaning, airflow checks, and listening for the evaporator fan.

• Set the refrigerator to 37°F and freezer to 0°F, then give it 24 hours to stabilize.
• Make sure food packages are not blocking interior air vents (cold air has to circulate down).
• Clean dust and pet hair from the condenser area; poor airflow here reduces cooling everywhere.
• Listen for the evaporator fan running when the doors are closed (a failed fan often causes warm zones).
• Check for heavy frost on the back wall inside the freezer; that points to a defrost problem.

Bottom-area warming usually means cold air is not being moved or shared correctly. Fixing airflow (fan, frost blockage, vent obstruction) and heat removal (condenser cleaning) prevents food spoilage and reduces compressor run time.

Use the 79579733900 manual for vent locations, temperature control guidance, and access notes for service areas.

Last updated: January 2026

Common problems on the Kenmore Elite 79579733900 bottom-mount refrigerator are no cooling or weak cooling, frost buildup, water leaks, dispenser or ice maker issues, and unusual noises. Most fixes start with airflow and defrost checks, then move to parts like fans, the defrost heater, or the water inlet valve.

• Not cooling or warm fridge/freezer: dirty condenser area, failed evaporator fan, sealed-system/compressor issues
• Frost or ice buildup: defrost system failure, door not sealing, frequent door openings
• Water under the refrigerator or in the freezer: clogged/iced drain path, cracked drain tube
• No ice or slow water dispensing: restricted water supply, clogged filter, failing inlet valve, frozen water line
• Buzzing, clicking, or rattling: fan blade hitting ice, failing start components, loose panels

1. Set temps to typical targets: 37°F fresh food and 0°F freezer.
2. Make sure vents inside the refrigerator are not blocked by food packages.
3. Listen for the evaporator fan when the door switch is pressed; a dead fan often means poor cooling.
4. Check for ice or debris in the drain area if you see puddles.
5. Confirm the household water shutoff is fully open and the supply line is not kinked.

Cooling, defrosting, and water delivery are connected systems. A failed evaporator fan can mimic a “not cooling” complaint, and a defrost problem can create ice that blocks airflow, causes noise, and leads to leaks.

• Use the 79579733900 owner's manual for control settings, normal sounds, and care/cleaning guidance.
• If you see an error code, match it using Kenmore 795 model bottom freezer refrigerator error codes.

Last updated: January 2026

Kenmore Elite refrigerator model 79579733900 is a bottom-mount refrigerator; the exact exterior dimensions and capacity depend on the specific door, hinge, and handle configuration listed for your unit. Use the 79579733900 owner's manual to confirm the official height, width, depth, and required clearances.

When customers ask for size, they typically need one or more of these measurements:

• Overall width (cabinet and doors)
• Overall height (to top of hinge cover)
• Overall depth (without handles and with handles)
• Door swing clearance (space needed to open doors fully)
• Installation clearance (airflow space around the cabinet)

Use a tape measure and record in inches.

• Measure width at the widest point across the front
• Measure height from floor to the highest point (often the hinge cover)
• Measure depth from the back to the front edge; note without handles and with handles
• Add clearance for ventilation and door opening

These ranges help you plan space while you verify the exact specs in the manual.

Correct dimensions prevent installation issues like doors hitting cabinets, blocked airflow that causes warm temperatures, and freezer drawers that cannot open fully.

Last updated: January 2026