Craftsman 247289800 tractor Parts

To look up your Craftsman model number, we recommend checking the ID label on the tractor frame under the seat or on the underside of the seat itself. For this parts page, the model number you are matching to is 247289800; confirm the label matches before ordering parts.

Where to find the model and serial number label

On most Craftsman front-engine lawn tractors like model 247289800, the model and serial number are printed on a sticker or metal tag in one of these common spots:

• On the frame under the seat (lift the seat to view)
• On the underside of the seat pan
• Near the rear fender area close to the seat mounting points
• Occasionally on the frame rail near the footrest (varies by build)

For diagrams and model-specific identification details, use the 247289800 operator's manual.

How to use the model number to look up parts

Once you have the model number, use it to ensure you get the correct diagrams and compatible parts for your exact tractor configuration.

• Match the model number exactly (including any dots on the label, such as 247.28980)
• Use the parts diagrams to identify the correct part name and reference number
• Confirm the part number before ordering (belts, pulleys, switches, and deck parts often vary)
• If your label is damaged, compare major assemblies (deck size, engine HP, and controls) to the manual

Quick match guide

What you see	What it means	What to do next
247.28980	Common label format	Use it to confirm you are on the right model
247289800	Parts lookup format	Use it to select diagrams and order parts

Why it matters

Even small differences in a Craftsman riding mower build can change which deck belt, electric PTO clutch, or interlock switch fits. Using the exact model number helps prevent wrong-part returns and downtime during mowing season.

Last updated: February 2026

The most common problems we see on the Craftsman 247289800 front-engine lawn tractor involve drive and deck belt wear, PTO and safety switch no-start conditions, uneven cutting from deck/spindle issues, and steering looseness. Use the 247289800 owner's manual for model-specific checks, adjustments, and maintenance intervals.

Common symptoms and what usually causes them

• Mower deck will not engage or blades stop: worn deck belt, weak idler pulley, or clutch issue
• Tractor will not start or dies when you leave the seat: safety interlock circuit problem (seat switch, brake switch, PTO switch)
• Poor cut quality (scalping, streaks, uneven height): dull blades, deck not leveled, spindle wear
• Squealing, burning rubber smell, or belt keeps coming off: misrouted belt, worn pulleys, bent belt keepers
• Loose steering or wandering: worn steering gears, loose hardware, front-end wear
• Lights not working: bulb failure or wiring/connector issue

Parts that commonly fix these issues

If your symptoms match, these model-compatible parts are common repair items:

• Lawn tractor deck belt 954-04060B for slipping, squealing, or no blade drive
• Lawn mower idler pulley 753-08068 for belt noise, poor tension, or belt derailment
• Lawn tractor electric clutch 917-04163A for PTO engagement problems
• Lawn tractor interlock switch 725-04363 for no-start or sudden shutoff tied to safety circuits
• Lawn mower spindle assembly 618-04950 for vibration, rumbling, or uneven cutting

Quick checks we recommend before ordering parts

1. Park on level ground, set parking brake, remove the key, and let hot parts cool.
2. Inspect belts for glazing, cracking, fraying, or stretched sections.
3. Spin deck pulleys by hand (engine off); listen for grinding or wobble.
4. Confirm the PTO switch and brake/seat safety functions operate consistently.
5. Look for damaged wiring near the frame, battery area, and under the dash.

Symptom-to-part guide

Symptom	Most likely area	Common part to check
Blades will not engage	Belt/PTO drive	Deck belt, electric clutch
Starts intermittently	Safety circuit	Interlock switch, ignition switch
Uneven cut	Deck/spindles	Spindle assembly, deck leveling
Belt keeps jumping	Pulleys/keepers	Idler pulley, pulley alignment

Why it matters

Catching belt, pulley, spindle, and interlock problems early prevents bigger failures like deck housing damage, burned belts, and repeated no-start situations.

Last updated: March 2026

Craftsman model 247289800 is covered by an Operator’s Manual dated September 3, 2010, so this tractor is from the 2010 timeframe. To pin down the exact build date of your specific unit, match the serial number on the product ID label to the identification information in the 247289800 operator’s manual.

How to find the build date on your tractor

The model number identifies the correct parts diagrams; the serial number identifies the specific production run.

• Park on a flat surface, set the parking brake, remove the key, and let hot parts cool.
• Locate the product ID label (commonly under the seat, on the frame rail, or near the rear fender).
• Record the model number 247289800 and the serial number exactly as printed.
• Use the identification section in the 247289800 operator’s manual to interpret the label details.
• If the label is worn, take a clear photo and write down every readable character.

What the manual date tells you (and what it does not)

The manual’s form date is a strong indicator of when the documentation was issued; it helps you stay in the right generation for parts and service procedures.

What you’re checking	What to use	Result
General timeframe	Manual form date (09/03/2010)	Places the tractor in the 2010 era
Exact build date	Serial number on ID label	Identifies the specific build run
Correct replacement parts	Model number 247289800	Matches diagrams and compatibility

Why it matters

Craftsman tractors can have running changes by production run (deck hardware, wiring, safety interlock setup). Confirming the serial number helps you order the right maintenance and repair parts, such as a lawn tractor deck belt 954-04060B or a lawn tractor interlock switch 725-04363.

Last updated: February 2026