Kenmore 1069517650 refrigerator Parts

To identify your Kenmore refrigerator model, we look for the model and serial tag on the cabinet or door area. For Kenmore model 1069517650, the tag is typically inside the fresh food compartment or freezer, or near the lower front kickplate.

Where to find the model number tag

Check these common locations first (use a flashlight and look for a sticker or metal plate):

• Inside the refrigerator compartment on a side wall (often upper right or left)
• Inside the freezer compartment on a side wall or back wall
• On the door frame (visible when you open the refrigerator door)
• Behind the lower crisper drawers on the cabinet wall
• Behind or just above the lower front kickplate (toe grille)

What the label looks like (and what to write down)

The tag usually includes:

• Model number (example format: 106.9517650 or 1069517650)
• Serial number (needed for date and production info)
• Electrical ratings (volts/amps)

Write the model number exactly as shown. If it includes dots, we still recommend searching parts using the full number without changing any digits.

Quick checklist: model number vs. part number

Item	What it identifies	Where you’ll use it
Model number	Your exact refrigerator version	Parts lookup and diagrams
Serial number	Production run details	Service history and compatibility checks
Part number / part ID	A specific replacement part	Ordering the correct part

Why it matters

Kenmore refrigerators can look similar across many series, but parts like an ice maker, thermostat, or inlet valve can vary by model. Using the exact model number helps us match the correct components the first time, such as the refrigerator ice maker 4317943.

Last updated: February 2026

The most common problems we see on Kenmore refrigerators (including model 1069517650) are cooling issues, water leaks, ice maker and dispenser failures, and unusual noises. These usually trace back to airflow restrictions (dirty coils or a stalled fan), defrost system trouble, or worn water and ice components.

Most common symptoms and what they usually mean

• Not cooling or warm fridge/freezer: dirty condenser coils, failed evaporator fan, or a defrost problem causing ice buildup
• Water under the fridge or inside the fresh food section: clogged defrost drain, cracked water line, or a leaking valve
• Ice maker not making ice: no water supply, frozen fill tube, failed ice maker, or a bad inlet valve
• No ice dispensing or clumping ice: dispenser/auger issue, solenoid problem, or ice container problems
• Buzzing, rattling, or clicking: fan blade hitting ice, loose parts, or compressor start components

Quick checks we recommend first (10 to 20 minutes)

• Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
• Clean condenser coils and confirm the unit has good airflow around it.
• Listen for the evaporator fan (freezer) and condenser fan (rear/bottom) running.
• Check door seals for gaps and make sure doors close fully.
• If you have a dispenser, confirm household water supply is on and the line is not kinked.

Parts that commonly solve these problems on model 1069517650

If troubleshooting points to a failed component, these are common replacements for this model:

Problem area	What fails most often	Example model-matched part
Ice production	Ice maker assembly	Refrigerator ice maker 4317943
Water supply to ice maker/dispenser	Dual water inlet valve	Refrigerator inlet valve 4318046
Temperature control	Cold control thermostat	Refrigerator thermostat WP2198202
Ice dispensing	Dispenser solenoid	Refrigerator ice dispenser solenoid WP2152713

Why it matters

Cooling and water/ice problems often start small (restricted airflow, minor seep at a fitting) and then create bigger issues like frost buildup, food spoilage, or recurring leaks. Catching the root cause early helps protect the compressor and keeps temperatures stable.

Helpful DIY guides

• Use Kenmore 106 model refrigerator error codes if your display shows an error.
• For dispenser and ice chute issues, follow how to disassemble a Kenmore refrigerator dispenser.
• For recurring ice maker or water dispenser trouble, use how to prevent water dispenser and ice maker problems.

Last updated: February 2026

Most Kenmore refrigerators, including model 1069517650, typically last 10 to 15 years with normal household use. Reaching the high end of that range depends on steady cooling performance, clean airflow, and keeping the ice and water system leak-free and unclogged.

Typical lifespan ranges (what we see most often)

Refrigerator type	Typical lifespan	Notes
Top-freezer	12 to 18 years	Simplest design; fewer dispenser parts to maintain
Side-by-side	10 to 15 years	More moving parts (ice and water) can add wear points
French door	9 to 14 years	More seals, fans, and controls; maintenance matters more

Maintenance that adds years

• Vacuum condenser coils and the grille area every 6 to 12 months (more often with pets).
• Keep door gaskets clean and sealing tightly; warm air intrusion shortens compressor life.
• Maintain steady temperatures (about 37°F fresh food, 0°F freezer) to reduce run time.
• Replace failed dispenser or ice components promptly to prevent jams and overheating.
• Fix water leaks quickly to avoid corrosion and ice buildup.

Parts that commonly affect longevity

When these parts fail, the refrigerator may still run, but it often works harder and wears faster:

• Refrigerator thermostat WP2198202 (temperature control issues can cause long run times)
• Run capacitor WPW10662129 (starting problems can stress the compressor)
• Refrigerator inlet valve 4318046 (water flow problems can lead to ice maker issues)

Why it matters

A refrigerator that runs longer than it should (from dirty coils, poor door sealing, or temperature control problems) uses more energy and puts extra strain on the sealed system. Preventive care is usually cheaper than replacing major cooling components.

Last updated: February 2026