Kenmore 66513473N413 dishwasher Parts

Yes. We still see strong parts availability for many Kenmore dishwashers, including model 66513473N413, because common wear items and core components are still sold as replacement parts. The key is matching parts by your full model number and confirming fit using the 66513473N413 owner's manual.

How to find the right part for your Kenmore 66513473N413

Use your model number first, then narrow by the symptom (no heat, not draining, leaking, poor cleaning).

• Confirm the full model number on the rating label (inside the door area on most dishwashers)
• Identify the problem symptom (heat, fill, drain, wash, rack hardware)
• Compare the part description to your symptom and the exploded-view diagram
• Check whether you need related items (hose clamp, seals, grommets)
• Follow the safety steps and access panels shown in the 66513473N413 installation guide

Common parts customers replace on this model

These are examples of parts that are commonly replaced on Kenmore dishwashers like 66513473N413.

Symptom	Likely part category	Example part for this model
Dishes not drying or water not heating	Heating circuit	Element assembly W10518394
Dishwasher will not fill or fills slowly	Water supply	Dishwasher water inlet valve W11175771
Water left in tub	Drain system	Dishwasher drain pump W10876537
Poor wash coverage	Spray system	Dishwasher spray arm, lower W10849471
Door won’t latch or cycle won’t start	Door switch/latch	Dishwasher door latch WPW10653840

Why it matters

Ordering by “Kenmore dishwasher” alone often leads to the wrong fit because Kenmore models use different designs across series and years. Using 66513473N413 helps you get the correct OEM-style replacement and avoid repeat repairs.

If you’re troubleshooting (not sure which part failed)

Start with the simplest checks before buying parts.

• Clean the filter area and check for debris restrictions
• Verify the water supply valve is fully open
• Listen for drain pump operation during the drain portion of the cycle
• Check for error codes and match them to the symptom using Kenmore 665 model dishwasher error codes

Last updated: February 2026

Yes, repairing a Kenmore dishwasher is usually worth it when the unit is under about 10 years old and the repair is a common wear item (drain pump, inlet valve, heater, latch). For Kenmore model 66513473N413, we recommend comparing the repair cost to replacement cost and the dishwasher’s overall condition using the 66513473N413 owner's manual.

Quick decision checklist

• If the dishwasher is leaking from the tub or has major structural damage, replacement is often the better value.
• If it won’t drain, won’t fill, won’t heat, or won’t start, repair is typically cost-effective.
• If the problem is intermittent (random stopping, odd beeps), check for an error code first.
• If you’ve already replaced multiple major parts recently, replacement can make more sense.
• If racks are failing but the machine runs well, a rack or track repair is usually a good investment.

Typical “worth it” repairs for this model

Many common failures on Kenmore 665-series dishwashers are straightforward part replacements.

Symptom	Common fix	Example part for 66513473N413
Not draining, standing water	Replace drain pump, clear drain path	Dishwasher drain pump W10876537
Not filling or fills slowly	Replace water inlet valve, verify supply	Dishwasher water inlet valve W11175771
Dishes not drying, water not heating	Replace heater circuit component	Element assembly W10518394
Door won’t latch or starts then stops	Replace latch, check strike alignment	Dishwasher door latch WPW10653840

How we recommend comparing repair vs. replace

1. Estimate total repair cost: parts plus labor (or your DIY time).
2. Check age and usage: heavy daily use pushes you closer to replacement sooner.
3. Confirm the failure: a clogged filter or blocked spray arm can mimic a “bad pump.”
4. Look for error codes: they narrow the diagnosis fast; use Kenmore 665 model dishwasher error codes.

Why it matters

A targeted repair (like a drain pump or inlet valve) can restore full performance for far less than a new dishwasher, while avoiding the extra work of installation changes, leveling, and drain setup.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label. On Kenmore model 66513473N413, that label is typically located on the dishwasher frame around the door opening; open the door and look along the inner edge of the tub or door frame. See the 66513473N413 owner's manual for the exact label location diagram.

Where to look first

Check these common label spots (in order):

• Along the left or right side of the door frame (vertical edge)
• Across the top edge of the tub opening (under the counter lip)
• On the inner door edge near the latch area
• On the side wall of the tub opening, just behind the front gasket

What the label looks like and what to write down

The label usually includes both identifiers you need for parts and service.

Label item	What it’s used for	Example format
Model number	Matching parts and diagrams	66513473N413
Serial number	Production details, version breaks	Letters and numbers

• Copy the model number exactly, including all digits and letters
• Record the serial number too; it helps confirm the correct part variation
• If the label is worn, take a clear photo with the door open and good lighting

Why it matters

Kenmore 665-series dishwashers can look similar across multiple versions. Using the full model number (66513473N413) helps us match the correct parts list, diagrams, and items like the dishwasher water inlet valve, drain pump, or filter.

Last updated: March 2026