Kenmore Elite 66513922K017 undercounter dishwasher Parts

Yes. We still carry replacement parts for Kenmore dishwashers, including the Kenmore Elite 66513922K017. The key is matching parts to your exact model number so you get the correct fit and connections for items like the drain pump, water inlet valve, filter, racks, and door seals.

How to find the right part for your Kenmore Elite 66513922K017

Use your model number (66513922K017) to shop by the exact parts list for your dishwasher, then confirm the part name and ID before ordering.

• Match the full model number on the rating label to 66513922K017
• Look up the symptom first (leaking, not draining, poor cleaning)
• Compare the part description to what you see in the dishwasher
• Use diagrams and notes in the owner's manual to confirm what you are replacing
• Order from the parts list for this model, or search by model on Sears PartsDirect

Common Kenmore dishwasher parts we stock for this model

These are examples of parts available for Kenmore Elite 66513922K017 that cover frequent repairs and maintenance:

Problem you notice	Part that often fixes it	Example part for this model
Not draining, water left in tub	Drain pump or drain hose	Dishwasher drain pump WPW10348269
Poor cleaning, gritty dishes	Filter needs cleaning or replacement	Dishwasher filter W10872845
Leaks at the bottom of the door	Lower door seal	Dishwasher door seal, lower WPW10497235
Upper rack stops sliding smoothly	Rail stop or slide rail	Dishwasher dishrack slide rail stop, upper WPW10195622

Why it matters (model matching and performance)

Kenmore dishwashers are built with model-specific mounting points, hose routing, and electrical connectors. Using the correct 66513922K017 part helps prevent leaks, drainage problems, and repeat failures, and it keeps wash performance consistent.

Last updated: February 2026

Kenmore Elite dishwasher noise levels vary by model and configuration. For Kenmore Elite 66513922K017, the most reliable way to confirm the exact dBA rating is to check the product specifications in the documentation packet that comes with the unit; start with the 66513922K017 owner's manual.

Typical Kenmore Elite dishwasher noise range

Most Kenmore Elite undercounter dishwashers are designed to run in a quiet range; many fall in the low-40s to upper-40s dBA depending on the series and features.

• Low-40s dBA: very quiet, often hard to hear in the next room
• Mid-40s dBA: quiet in most kitchens
• Upper-40s dBA: noticeable but still “quiet class” compared to older models

Where to look for the official dBA rating

Use your model documentation and look for a “Specifications,” “Features,” or “Product data” section.

• Search for keywords: dBA, decibel, sound, noise level
• Check any spec sheet included with the dishwasher paperwork
• If the unit seems louder than expected, verify installation details in the installation guide

Source	What you may see	What it tells you
Owner’s manual	Features, cycle info, maintenance	How the dishwasher is designed to operate and be maintained
Installation guide	Leveling, mounting, drain routing	How to prevent vibration and cabinet-amplified noise
Model/serial tag area	Model identifiers	Confirms you are matching specs to 66513922K017

If your dishwasher sounds louder than it should

A dishwasher can sound “louder” even when it is operating normally; vibration, a dirty filter, or a noisy drain can change what you hear.

• Clean the filter regularly; buildup can increase pump noise (see dishwasher filter W10872845)
• Make sure dishes are not hitting the spray arm
• Confirm the dishwasher is level and firmly secured to the cabinet (use the installation guide)
• If draining is loud or slow, check for kinks or restrictions; a failing pump can also be a cause (see dishwasher drain pump WPW10348269)

Why it matters

The dBA rating is a design spec; installation, loading, and maintenance determine whether your Kenmore Elite 66513922K017 stays close to that quiet performance over time.

You can order replacement parts from the parts list for model 66513922K017, or search by model number on Sears PartsDirect.

Last updated: February 2026

Yes; repairing your Kenmore Elite dishwasher model 66513922K017 is worth it when the failure is a single, common wear part and the total cost stays well below replacement. If multiple major electrical parts are failing or leaks are extensive, replacement is the better value.

Our repair-or-replace checklist

Use these checkpoints before buying parts:

• Age benchmark: Dishwashers typically last 10 years.
• Cost rule: Repair is the better value when the total is under about 50% of replacement cost.
• Failure type: Draining, filling, door sealing, and rack hardware are usually straightforward.
• Repeat breakdowns: A second major repair in a short time points to replacement.
• Maintenance-related symptoms: Odors and white residue often improve with cleaning and rinse aid.

Repairs that are usually worth it on model 66513922K017

These issues often come down to one part or a simple blockage:

• Standing water or not draining (pump or drain path)
• Slow fill or no fill (inlet valve)
• Poor drying (heater plus rinse aid and filter cleaning)
• Rack rolling or alignment problems (rollers, rail stops, clips)
• Small leaks at the bottom of the door (lower door seal)

Examples of model-matched parts

Symptom	Example part on this model	What it affects
Won’t drain	Dishwasher drain pump WPW10348269	Drains water out of the tub
Won’t fill	Dishwasher water inlet valve W11175771	Lets water into the dishwasher
Leaks at door bottom	Dishwasher door seal, lower WPW10497235	Seals the lower edge of the door

Why it matters

A targeted repair prevents secondary problems (odor from poor draining, water damage from leaks) and keeps the 66513922K017 running reliably without the cost and disruption of replacement.

Do these quick checks first

• Use the troubleshooting steps in the owner’s manual.
• If connected to a disposer, make sure the disposer inlet knockout plug is removed.
• Check the drain hose for kinks and clogs.
• For hard-water residue, use rinse aid and clean the filter monthly.
• If you decide to buy parts, order from the parts list for model 66513922K017 or search by model on Sears PartsDirect.

Last updated: February 2026

Your Kenmore Elite dishwasher model number is printed on the model and serial number label located on the inside edge of the dishwasher door (typically along the left side of the tub opening). For this model page, the model number is 66513922K017; match your label to confirm.

How to find the model number on the dishwasher

• Open the dishwasher door fully.
• Look along the inner door frame and tub opening edge.
• Check the left side first; that is the most common location for this Kenmore Elite design.
• Write down the full model number exactly as shown (including all digits and letters).
• Record the serial number too; it helps when selecting the correct replacement parts.

What the model number is used for (and why it matters)

The model number tells us the exact configuration of your dishwasher so we can match the correct parts and diagrams. Small differences in a series can change items like the rack hardware, water inlet valve, or drain pump.

Common label locations (quick reference)

Location	What to look for	Notes
Inside edge of door / tub opening	Model and serial number label	Most common for Kenmore Elite undercounter dishwashers
Side of the inner door frame	Sticker or etched label	Often easiest to read with the door fully open
Behind the toe-kick area	Tech sheet pocket (on some units)	Not the primary model label, but may include service info

After you find it: next best steps

• Use the exact model number to choose parts from the list for this dishwasher.
• If you are ordering common wear items, confirm the part matches your symptom:
  • Poor draining: consider a drain system check and the dishwasher drain pump WPW10348269.
  • Leaks at the bottom of the door: inspect the dishwasher door seal, lower WPW10497235.
  • Racks not rolling smoothly: check the dishwasher dishrack roller assembly, lower WPW10195417.
• For diagrams, safety notes, and feature identification, use the owner's manual.
• If you need to search beyond the parts shown for this model, use Sears PartsDirect and search by 66513922K017.

Why it matters

Using the correct model number prevents ordering the wrong Kenmore dishwasher parts and helps us pinpoint the right repair steps for your exact rack, pump, heater, and control configuration.

Last updated: February 2026