KitchenAid KGYE678BAL0 gas dryer Parts

Dryers use a small set of core parts that move the drum, move air, and control heat. On a KitchenAid gas dryer model KGYE678BAL0, the most common part names you will see include the drum belt, idler pulley, drum support rollers, drive motor, blower wheel, and gas ignition components.

• Drum belt: turns the drum using the motor pulley
• Idler pulley: keeps proper belt tension so the drum can rotate smoothly
• Drum support rollers: support the drum and reduce friction and noise
• Drive motor: powers drum rotation and often the blower
• Blower wheel: pulls air through the drum and pushes it out the vent
• Operating thermostat / thermal safety parts: regulate temperature and prevent overheating
• Igniter, gas valve, and coils (gas models): light and control the burner flame

If you are shopping by symptom (no heat, squealing, not tumbling), these are frequent wear items:

• Drum belt 341241 (belt breaks or slips; drum will not tumble)
• Dryer idler pulley WP691366 (squealing, thumping, belt issues)
• Support WPW10314173 (rumbling or thumping as the drum turns)
• Dryer blower wheel WP694089 (poor airflow, rattling, long dry times)
• Dryer valve coil kit 279834 (heats briefly then stops heating)

Knowing the correct part names helps you match symptoms to the right repair category (tumbling, airflow, or heat). That speeds up troubleshooting and helps you order the correct KitchenAid KGYE678BAL0 replacement parts the first time.

For a deeper overview of dryer components, we recommend what are the main parts of a clothes dryer.

Last updated: February 2026

For the KitchenAid KGYE678BAL0 gas dryer, the most common problem we see is poor airflow, usually from lint buildup in the lint screen area, blower housing, or the vent duct. When airflow drops, drying times get longer and the dryer can run hotter than normal.

• Clean the lint screen before every load; wash it with warm water if you use dryer sheets.
• Check the vent hood outside; the flap should open strongly while the dryer runs.
• Run a timed dry cycle and confirm you have strong airflow at the outside vent.
• Listen for a rumbling or squealing sound (often points to belt, rollers, or idler issues).
• If the drum turns but heat is inconsistent, suspect burner ignition components.

Good airflow is the foundation of dryer performance. When the vent system is restricted, clothes dry slowly, cycles run longer, and components like the blower wheel, thermostat, and gas burner system work harder than they should.

If your main complaint is long dry times or weak airflow, we use the same step-by-step approach shown in dryer takes a long time to dry. If the dryer tumbles but will not heat reliably, follow the checks in gas dryer wont heat troubleshooting video.

Last updated: February 2026

For your KitchenAid gas dryer, the model number is printed on the appliance’s ID tag (model and serial label). On KGYE678BAL0 units, this tag is typically found around the door opening or on the door frame area; match the full model number exactly before ordering parts.

Check these common ID tag locations first:

• Open the dryer door and look along the door frame (left or right side)
• Look on the inside face of the dryer door
• Check the front panel just inside the door opening
• If you have a lower toe panel, check behind it near the front frame

Use the complete model number, including all letters and numbers. For this dryer, it should read KGYE678BAL0.

KitchenAid dryers can use different components depending on the exact model version. Using the correct model number helps us match the right diagrams and parts, such as the drum belt 341241 or igniter 279311.

• Clean the label gently with a damp cloth and mild soap
• Use your phone camera and zoom in to read small print
• Write the model number down before you start disassembly

Last updated: March 2026