How to find Craftsman parts?
To find the right Craftsman parts for your Craftsman model 917299360 (6-hp tiller with reverse), match your model number first, then use the parts diagram to identify the exact part name and part ID before ordering. This prevents fit issues and speeds up repairs.
- Confirm the model number on the tiller’s model tag: 917299360
- Identify the system you’re repairing (tines, drive, reverse, handle controls)
- Use the diagram callouts to match the part’s name to the listing
- Verify the part ID and description match what you need (not just the part number)
- Order the part and compare it to the old part before installing
These examples show how a part listing is typically identified by name plus part ID:
| What it’s used for | Example part name | Example part ID |
|---|---|---|
| Linkage and hardware retention | Spring retainer 532003146 | 532003146 |
| Hitch or attachment connection | Tiller clevis pin 532443676 | 532443676 |
| Cable routing and support | Lawn & garden equipment cable bracket 532009484 | 532009484 |
- Don’t rely on engine HP alone; always use the full model number
- Match the part’s location on the diagram (left/right, upper/lower, front/rear)
- Replace worn fasteners when removing them (nuts, retainers, pins)
- If a control feels stiff or won’t engage, inspect cables, brackets, and pins together
Craftsman tillers often have multiple versions that look similar. Using the 917299360 model number plus the exact part ID helps ensure the replacement fits your reverse drive and control setup correctly.
Last updated: February 2026
Where is the model number on a Craftsman tiller?
On a Craftsman tiller, the model number is printed on the product ID label. For Craftsman model 917299360, you’ll typically find that label on the tine shield (tine guard) area or on/near the fuel tank; some units place it on the front of the frame.
- Tine shield/tine guard behind the tines
- On the fuel tank or just below it on the frame
- Front of the tiller frame (especially on larger units)
- Handle support brackets near the control cables
- Side of the engine mounting plate or nearby frame rail
The ID label is usually a small sticker or metal tag. We recommend recording these items:
| What to capture | Example for this tiller | Why it matters |
|---|---|---|
| Model number | 917299360 | Ensures parts diagrams match your exact tiller |
| Product number (if shown) | Varies | Helps narrow down revisions |
| Serial number | Varies | Useful for service history and exact fit |
- Wipe the area with a damp rag and mild detergent; avoid soaking the label.
- Use a flashlight at a low angle to make faint printing stand out.
- Take a close-up photo and zoom in.
- If the label is missing, match parts by diagram and hardware size; for example, common fasteners like the gripco nut 596322601 can help you confirm you’re in the right section.
Craftsman tillers can look similar across years, but small changes affect cables, brackets, and hardware. Using the correct model number (917299360) helps us point you to the right parts and prevents returns.
Last updated: February 2026
Who builds Craftsman tillers?
Craftsman is the brand name; Craftsman tillers are built by different partner manufacturers depending on the model series. For Craftsman model 917299360 (6-hp tiller with reverse), the most reliable way to identify the builder is the manufacturer information printed on the ID tag and any secondary compliance label on the frame.
Use the tiller’s labels first; they are the definitive source for who built the unit.
- Find the ID tag with the full model number 917299360.
- Look for a second line that lists a manufacturer name, a company address, or an “MFG” code.
- Check for an engine label; the engine brand is not the same as the tiller manufacturer, but it helps when ordering engine parts.
- Compare your tiller’s parts diagrams to what you see on the machine (tine shield, depth stake, reverse linkage).
- Match a few hardware items from the diagrams to confirm you are in the correct parts list.
The prefix helps route you to the right parts system, but the ID tag is what confirms the builder.
| What you’re checking | What it’s good for | What it does not prove |
|---|---|---|
| Model prefix (example: 917) | Narrowing down the correct parts diagrams | The exact manufacturer name by itself |
| ID tag manufacturer line | Identifying who built the unit | Nothing; this is the confirmation |
Knowing the correct model and diagram set prevents ordering the wrong linkage, fasteners, or control hardware for a reverse-equipped tiller.
If you are verifying fitment by matching hardware on your machine, these are examples of model-listed parts:
- Tiller clevis pin 532443676 (clevis-style pin used on tiller linkages)
- Lawn & garden equipment cable bracket 532009484 (bracket that supports/positions a control cable)
- Spring retainer 532003146 (retainer used to secure a pin or linkage point)
Last updated: February 2026
