Kenmore Elite 10657453701 side-by-side refrigerator Parts

Kenmore Elite is a solid appliance line overall, but it is not a “stove” model by itself. For your Kenmore Elite 10657453701, we can say it is a side-by-side refrigerator, and its day-to-day performance depends most on correct setup, maintenance, and using the right replacement parts listed in the owner's manual.

When people say “good stove,” they usually mean cooking performance and reliability. For Kenmore Elite products in general, we recommend evaluating these practical factors:

• Fit and features you actually use (convection, self-clean, burner output, controls)
• Parts availability for common wear items (elements, igniters, knobs, sensors)
• Serviceability (access to components, clear diagnostics)
• Maintenance needs (cleaning, calibration, ventilation)
• Total cost of ownership (parts, repairs, energy use)

Model 10657453701 is a Kenmore Elite side-by-side refrigerator, not a range. If you are trying to evaluate a Kenmore Elite stove/range, the most accurate approach is to compare the exact range model number on its rating plate to reviews and specs.

Kenmore Elite is a brand tier, not a single product. A “good” Kenmore Elite stove depends on the specific range model, while your 10657453701 refrigerator’s “good” performance depends on maintenance items like the water filter and correct operating conditions described in the owner's manual.

For this refrigerator, staying on top of common maintenance and quick fixes prevents most complaints:

• Replace the water filter on schedule (use the correct filter type)
• Flush the water system after a filter change
• Allow 24 hours for water to chill after installation or heavy dispensing
• Discard the first glass if water has not been dispensed recently
• Confirm the unit is connected to a cold water supply

Last updated: February 2026

Common problems on the Kenmore Elite 10657453701 side-by-side refrigerator include warm temperatures from restricted airflow, ice and water dispenser issues after a filter change, moisture or leaks from drainage problems, and defrost-related frost buildup. Our owner's manual troubleshooting section helps you match symptoms to the right checks.

• Not cooling well: blocked air vents, overloaded shelves, dirty condenser area, or a fan/airflow problem
• Frost buildup or warm fridge with cold freezer: defrost system trouble (heater, thermostat, or airflow restriction)
• Ice maker not making ice: water supply issue, frozen fill path, or ice maker component failure
• Water dispenser flow is weak: new filter not flushed, air in the line, or a restriction in the water path
• Water leaks: clogged/iced drain, loose water line, or valve/tubing seepage

1. Confirm airflow: keep vents clear and allow space around items (the manual calls this “ensuring proper air circulation”).
2. After any filter change, flush the system: this clears trapped air and carbon fines.
3. Give temperatures time to stabilize: after changes, allow 24 hours for temperatures to fully normalize.
4. Know what “normal” sounds are: the manual lists normal operating sounds so you can separate normal cycling from a failing fan.

The manual notes that dispenser water is chilled to about 50°F (10°C) and that after installation or heavy dispensing you may need 24 hours for the water supply to cool. It also recommends flushing the water system after a filter change.

If troubleshooting points to a failed component, these model-matched parts are commonly involved:

• Water quality/flow: genuine Kenmore refrigerator water filter EDR3RXD1, refrigerator water filter cap (black) WP2260518B
• Ice production: refrigerator ice maker 2198597
• Leaks/low water to ice maker: refrigerator water inlet valve WPW10159839, refrigerator water tube 8201597
• Frost/defrost symptoms: refrigerator heater WP2323198, refrigerator defrost bi-metal thermostat WPW10225581

Catching airflow restrictions, filter-related flow problems, and early defrost symptoms quickly prevents food temperature swings, repeat ice maker failures, and water damage from slow leaks.

Last updated: February 2026

Your Kenmore Elite model 10657453701 is a side-by-side refrigerator, not a dryer, so dryer capacity (in cubic feet) does not apply to this model. For refrigerator specifications tied to your exact model, we recommend checking the owner's manual.

Model numbers are the fastest way to match specs to the right product. For Kenmore Elite 10657453701, “capacity” typically means refrigerator storage volume, not dryer drum size.

• If you meant a dryer, the model number will be on the dryer door opening or rear panel.
• If you meant this refrigerator, the model tag is usually inside the fresh food section (side wall or ceiling).
• Use the exact model number to avoid ordering the wrong parts or reading the wrong specs.

Using the correct appliance type keeps troubleshooting and parts selection accurate. For example, this refrigerator model commonly uses a water filter and ice maker system; those are unrelated to dryer capacity.

If your question was really about refrigerator performance (ice, water, cooling), these parts are commonly involved:

• Genuine Kenmore refrigerator water filter EDR3RXD1 (water taste, slow dispensing, filter replacement)
• Refrigerator ice maker 2198597 (no ice, small cubes, intermittent ice)
• Refrigerator water inlet valve WPW10159839 (no water to dispenser or ice maker)

Last updated: February 2026

On Kenmore Elite model 10657453701, the model and serial number label is on the refrigerator cabinet (not on a removable part). Common locations include the inside wall of the fresh food section or freezer, along the door opening, or behind the lower toe grille. See the 10657453701 owner's manual for the exact label location and how to record it.

Look for a white or silver sticker or plate with MODEL and SERIAL.

• Inside the refrigerator compartment on a side wall
• Inside the freezer compartment on a side wall
• On the cabinet frame behind the door (door jamb area)
• Behind the lower toe grille (kick plate) at the front
• Near the crisper area (sometimes behind or beside the lower drawers)

• Open both doors and scan the cabinet walls at eye level first
• Check the door frame area where the gasket seals against the cabinet
• Remove the toe grille (if your unit has one) and look for a label on the front frame
• Use a flashlight; labels can be hard to see in low light
• Write down the full model number and serial number exactly as shown

The model number ensures we match the correct Kenmore Elite side-by-side refrigerator parts and diagrams for your exact configuration (ice maker, water filter housing, door style, and internal shelving). It also helps you pull the right procedures from the manual.

If you are locating the model number to order a water filter, this model commonly uses the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: February 2026