Frigidaire FEB24S5ASE electric oven Parts

No. “24-inch” wall ovens like the Frigidaire FEB24S5ASE are designed around a 24-inch cabinet opening, but the exact cutout width, cutout height, and depth clearances can vary by brand and model. Always match your cabinet cutout to the specs in the FEB24S5ASE installation guide.

What “24-inch” usually means (and what it does not)

A 24-inch wall oven is categorized by nominal width, not a universal, identical box size. Installation fit depends on the cabinet cutout and required clearances.

Common differences between 24-inch models include:

• Cutout height requirements (varies by trim and chassis design)
• Cutout depth and rear clearance needs
• Door swing clearance in front of the cabinet
• Electrical junction box location (right vs. left side)
• Trim style and how it sits against the cabinet face

FEB24S5ASE fit details to check before you buy

The installation instructions for this oven call out several fit-critical items:

• Measure your existing cutout first and compare to the cutout chart
• Do not remove side/back spacers (they help center the oven)
• Do not install a 24-inch wall oven in a base cabinet with a countertop above it
• Allow at least 19 3/8 inches of clearance for door depth when open
• Confirm “Dimension G” so the decorative trim sits correctly and to help prevent excess heat buildup

Quick comparison: “nominal size” vs. “installation fit”

Item	What you can assume	What you must verify
24-inch class	Fits many 24-inch cabinet openings	Exact cutout width/height/depth for your model
Door clearance	Door swings outward	Minimum front clearance when the door is open
Electrical hookup	Hardwired junction box	Junction box side and cable routing

Why it matters

If the cutout is even slightly off, the oven may not sit centered, the trim may not butt against the cabinet, and heat can build up around the cabinet opening. Verifying the cutout chart and clearances prevents rework and helps the oven vent properly.

Last updated: January 2026

Most Frigidaire ovens, including model FEB24S5ASE, do not use a dedicated external reset button for normal operation; the standard reset is clearing the control and restoring power. For many control faults, you can press CANCEL to stop beeping and clear the display, then reset power at the breaker if needed (see the FEB24S5ASE owner’s manual).

Quick reset options (in order)

• Press CANCEL to clear an error code and stop the beeping.
• If the display is flashing after a power interruption, set the clock before trying to program bake or broil.
• Turn the oven OFF, then flip the circuit breaker OFF for 1 to 10 minutes, and turn it back ON.
• If the oven is stuck in a self-clean related condition (door left open), close the door and press the required CANCEL pads for the oven(s).
• If the breaker trips again right away, leave it OFF and address the electrical issue before retrying.

What “reset” means on FEB24S5ASE

On this Frigidaire wall oven, “reset” usually means one of these actions:

Situation	What to do	What you should see
Control is beeping and shows F1 to F10	Press CANCEL, then reprogram settings	Beeping stops; display clears
Display is flashing after power loss	Set the clock	Oven accepts programming
Oven will not run at all	Power reset at breaker; check house breaker/fuse	Display returns; functions respond
Self-clean won’t start due to door issue	Close door; press the correct CANCEL pads	Clean cycle cancels or resets

Why it matters

A “reset” can clear a temporary electronic control glitch, but it also helps you identify when the problem is not a glitch (for example, repeated fault codes, a breaker that won’t stay set, or a wiring issue at the terminal block).

When a reset points to a part problem

If the oven still will not heat correctly after a reset, common suspects include the bake circuit and temperature sensing:

• A failed bake element can prevent normal baking (see Frigidaire range bake element 318255101).
• A drifting sensor can cause incorrect temperatures or heating problems (see Frigidaire range oven temperature sensor 316217002).

Last updated: January 2026

On a Frigidaire FEB24S5ASE electric wall oven, an FO45 (often shown as F045) error points to a problem with the electronic oven control or touchpad circuit, typically a stuck or failed key signal. Clearing it may work briefly, but repeated FO45 errors usually mean the control interface needs service or replacement.

What to do first (safe reset and quick checks)

• Press CANCEL/OFF to stop beeping and clear the display.
• Let the oven cool completely; heat can trigger intermittent keypad faults.
• Restore power by turning the breaker OFF for 1 minute, then ON.
• If the code returns immediately, avoid using the oven until the control issue is corrected.
• If the oven was in self-clean, confirm the door is fully closed and cancel the cycle.

For model-specific control and cancel key behavior, follow the steps in the FEB24S5ASE owner’s manual.

What FO45 usually means (and what typically fixes it)

FO45 is most commonly tied to the touch control panel (keypad) signal line. Depending on how your FEB24S5ASE is built, the fix is usually one of these:

Symptom	Most likely cause	Typical fix
FO45 returns right after reset	Stuck/shorted keypad circuit	Replace touchpad/control overlay or control assembly
FO45 appears after heating	Heat-sensitive control/keypad failure	Replace control interface; verify cooling/venting
Random beeping, unresponsive keys	Failing electronic oven control	Replace electronic control and inspect wiring

Why it matters

A failing touchpad or electronic control can cause unintended beeping, canceled cooking cycles, or unreliable temperature control. Addressing the fault early helps prevent no-heat situations and protects other components such as the bake element and temperature sensor.

Related parts that can be involved

If troubleshooting points to temperature regulation or heat complaints along with the error, these parts are commonly checked during diagnosis:

• Frigidaire range oven temperature sensor 316217002
• Frigidaire range bake element 318255101

Last updated: January 2026

Frigidaire wall ovens are a solid, dependable choice for most kitchens; with proper installation and normal maintenance, they typically deliver consistent baking and broiling performance. For the Frigidaire FEB24S5ASE electric wall oven, following the safety, venting, and operating guidance in the FEB24S5ASE owner's manual helps you get the best results and avoid common issues.

What “good” usually means for a wall oven

When customers ask if a wall oven is good, we focus on day-to-day performance and ownership experience:

• Even cooking: stable temperatures and predictable bake results
• Control usability: clear settings and reliable response
• Ventilation and safety: heat vents where expected and stays unobstructed
• Serviceability: common wear parts (like lights and sensors) are replaceable
• Fit and finish: door operation, trim alignment, and overall build quality

Model-specific tips that affect satisfaction (FEB24S5ASE)

A lot of “good vs. bad” comes down to setup and how the oven is used.

• Keep the oven vent area unobstructed; the manual notes the oven vents at the upper control panel or center trim depending on model, and that area can get very hot.
• Place racks while the oven is cool whenever possible; moving racks hot increases burn risk and can lead to damaged rack supports.
• Use the installation cutout and spacing guidance in the FEB24S5ASE installation guide so the oven sits level and has proper clearances.

Common ownership items (parts you may replace over time)

These are normal wear items that can impact your experience if they fail:

• Oven light not working: consider the range oven light bulb 316538904
• Temperature swings or inaccurate baking: consider the Frigidaire range oven temperature sensor 316217002
• Slow heat or no bake heat: bake circuit components (including the bake element) may need diagnosis

Quick comparison: what to expect

Category	What you should see	What suggests a problem
Baking	Consistent browning	Hot spots, underbaking
Preheat	Reaches set temp in a reasonable time	Very long preheat, never reaches temp
Controls	Predictable response	Random beeps, unresponsive keys
Venting	Hot air exits at vent	Melting items near vent, blocked airflow

Why it matters

A wall oven is built into cabinetry, so correct clearances, grounding, and venting are essential for safe operation and consistent cooking performance. When those basics are right, Frigidaire wall ovens typically provide reliable everyday results.

Last updated: January 2026