KitchenAid
Stand Mixer

Model #KSM7581BZ0 Official KitchenAid 7-quart stand mixer

Here are the diagrams and repair parts for KitchenAid KSM7581BZ0 7-quart stand mixer, as well as links to manuals and error code tables, if available.

There are a couple of ways to find the part or diagram you need:

  • Click a diagram to see the parts shown on that diagram.
  • In the search box below, enter all or part of the part number or the part’s name.

Not all parts are shown on the diagrams—those parts are labeled NI, for “not illustrated”.

We encourage you to save the model to your profile, so it’s easy to access parts and manuals for your appliance whenever you log in.

For DIY troubleshooting advice and repair guides, visit our repair help section.

Owner’s manual

Showing 10 of 79 parts

Dryer Drum Support Roller Retainer#16

Case, gearing and planetary unit Diagram

Dryer drum roller ring

Part #9703438
Replaced by #WP9703438
?
Manufacturer substitution
This part replaces 9703438. Substitute parts can look different from the original.
BEST SELLER
This item is not returnable
In Stock
$3.79 | 
21% OFF 
Phone Price: $4.79
Stand Mixer Retainer Pin#19

Case, gearing and planetary unit Diagram

Pin-dowel

Part #9707223
Replaced by #WP9707223
?
Manufacturer substitution
This part replaces 9707223. Substitute parts can look different from the original.
This item is not returnable
In Stock
$4.58 | 
18% OFF 
Phone Price: $5.58
Stand Mixer Retainer Ring#22

Case, gearing and planetary unit Diagram

Retaining ring

Part #9703680
Replaced by #WP9703680
?
Manufacturer substitution
This part replaces 9703680. Substitute parts can look different from the original.
This item is not returnable
In Stock
$5.09 | 
16% OFF 
Phone Price: $6.09
Stand Mixer Speed Control Board and Knob (Silver), 120-volt (replaces W10487697)#12

Case, gearing and planetary unit Diagram

Speed control

Part #W10234530
Replaced by #WPW10487697
?
Manufacturer substitution
This part replaces W10234530. Substitute parts can look different from the original.
In Stock
$96.20 | 
9% OFF 
Phone Price: $106.20
SCREW#8

Case, gearing and planetary unit Diagram

Screw

Part #3400617
This item is not returnable
In Stock
$5.09 | 
16% OFF 
Phone Price: $6.09
Stand Mixer Washer#17

Case, gearing and planetary unit Diagram

Washer

Part #9706090
Replaced by #WP9706090
?
Manufacturer substitution
This part replaces 9706090. Substitute parts can look different from the original.
This item is not returnable
In Stock
$3.79
Stand Mixer Planetary Ring Gear and Plate Assembly#7

Case, gearing and planetary unit Diagram

Gear

Part #W10234493
Replaced by #WPW10234493
?
Manufacturer substitution
This part replaces W10234493. Substitute parts can look different from the original.
In Stock
$36.49 | 
12% OFF 
Phone Price: $41.49
HANDLE, ROTA#23

Base and pedestal unit Diagram

Handle

Part #9703698
Replaced by #W11501449
?
Manufacturer substitution
This part replaces 9703698. Substitute parts can look different from the original.
In Stock
$16.31
Stand Mixer Planetary Assembly (White)#4

Color variation parts Diagram

Planetary

Part #W10234498
Replaced by #WPW10420628
?
Manufacturer substitution
This part replaces W10234498. Substitute parts can look different from the original.
In Stock
$47.42 | 
10% OFF 
Phone Price: $52.42
Stand Mixer Bowl Lift Rod Spring#12

Base and pedestal unit Diagram

Spring

Part #9237
Replaced by #4159622
?
Manufacturer substitution
This part replaces 9237. Substitute parts can look different from the original.
This item is not returnable
In Stock
$5.09 | 
16% OFF 
Phone Price: $6.09

Symptoms common to all stand mixers

Choose a symptom to see related stand mixer repairs.

Main cause: attachment clearance setting needs adjustment
Main causes: lack of electrical power, wiring failure, worn carbon motor brushes, bad drive motor, tripped overload switch, control problems
Main causes: bad lubricating grease, mixer sitting idle for weeks at a time, mixer running constantly for more than 30 minutes
Main cause: worn carbon motor brushes
Main causes: phase control board failure, wiring connection problem, faulty electronic control board
Main causes: bad wiring connections, faulty speed control plate, electronic control board failure
Main causes: bad worm gear, damaged planetary gear assembly

Repair guides common to all stand mixers

These step-by-step repair guides will help you safely fix what’s broken on your stand mixer.

September 20, 2015
By Lyle Weischwill
How to replace a stand mixer worm gear

Here’s how to replace the worm gear in your stand mixer if it’s worn or damaged.

Repair difficulty
Time required
 30 minutes or less
September 20, 2015
By Lyle Weischwill
How to replace a stand mixer phase control board

The phase control board works with the governor and control plate to control motor speed. Replace the phase control board if defective.

Repair difficulty
Time required
 30 minutes or less
September 1, 2015
By Lyle Weischwill
How to replace stand mixer motor brushes

If the carbon brushes are worn and damaged, replace them using these steps.

Repair difficulty
Time required
 15 minutes or less

Articles and videos common to all stand mixers

Use the advice and tips in these articles and videos to get the most out of your stand mixer.

August 30, 2022

How to enjoy all the online benefits we offer on our Sears PartsDirect website

By Lyle Weischwill

Learn about all the convenient features on our Sears PartsDirect website that make your parts purchases easier.

August 18, 2021

Using a wiring schematic to trace a current video

By Lyle Weischwill

Find out what’s wrong with your appliance by following a circuit.

September 1, 2015

Stand mixer common questions

By Lyle Weischwill

These common questions and answers can help you make the most of your stand mixer.