Kenmore Elite 11027062600 washer Parts

Yes. Kenmore Elite is Kenmore’s premium line, and the Kenmore Elite washer model 11027062600 is positioned as a higher-end option because it typically includes upgraded wash performance, cycle selections, and convenience features compared with standard Kenmore washers.

We see “high end” show up in day-to-day use as better cleaning results, more specialized cycles, and more refined operation. Your model’s cycle set (such as Normal, Casual/Wrinkle Free, Express Wash, Bulky/Bedding, Sheets/Towels, and Delicate/Handwash) supports a wider range of loads than basic washers. See the 11027062600 owner’s manual for the full cycle and option list.

• More cycle choices for specific fabrics and load types
• Better load handling for bulky items and sheets (reduced tangling)
• More control through modifiers and options (varies by cycle)
• Lid lock and “add a garment” style pause capability during certain points in the cycle
• High Efficiency detergent use for improved cleaning and efficiency

If you are deciding whether to repair or replace, “Elite” models are often worth repairing when the issue is a common wear item (drain, spin, vibration) because the overall feature set and performance are typically better than entry-level machines.

• Keep the washer level to reduce vibration and noise
• Use only HE detergent and avoid overdosing
• Do not overload above the top of the basket
• Address draining issues early (a weak drain can affect cycle results)

Last updated: January 2026

For the Kenmore Elite washer model 11027062600, a reliable hard reset is to disconnect power long enough to fully reboot the control, then restart a cycle. If the washer is paused or acting “stuck,” using the STOP button correctly can also clear the current cycle state and unlock the lid when safe.

• Press POWER to turn the washer off.
• Unplug the washer (or switch the breaker off).
• Wait 2 minutes.
• Restore power.
• Press POWER, select a cycle, then press START.

Your model uses STOP to pause or end a cycle:

• Press STOP once to pause and (after the Lid Lock light turns off) open the lid to add a garment.
• Press STOP twice to stop the cycle and turn the washer off.
• Close the lid, press POWER, reselect the cycle, then press START.

These items commonly prevent a restart after a reset:

• Lid not fully closed (the lid must be closed for the washer to start)
• Lid Lock light still on (wait for it to turn off before opening or restarting)
• Household breaker or outlet issue
• Drain problem leaving water in the tub (often tied to the drain pump)

A hard reset clears temporary control glitches, but it will not fix a mechanical failure (like a failing drain pump, worn suspension, or a lid that cannot lock). Using the correct STOP/START sequence also prevents lid-lock confusion and incomplete cycles.

For cycle and control-button details specific to this washer, use the 11027062600 owner’s manual.

Last updated: January 2026

The exact tub capacity (in cubic feet) for Kenmore Elite model 11027062600 is listed in the product specifications section of the 11027062600 owner's manual. If you do not see it there, use the measurement method below to estimate capacity accurately enough for load sizing.

We estimate tub volume by measuring the inside of the basket, then converting cubic inches to cubic feet.

• Unplug the washer for safety.
• Measure the inside diameter of the wash basket (in inches).
• Measure the usable depth from the basket bottom to the top rim (in inches).
• Use the formula below.
• Compare your result to common capacity ranges to sanity-check it.

Cubic feet = (3.1416 × (D ÷ 2)² × H) ÷ 1728

Most Kenmore top-load washers fall into these general ranges:

• Compact: ~2.0 to 3.0 cu. ft.
• Standard: ~3.1 to 4.0 cu. ft.
• Large capacity: ~4.1 to 5.0 cu. ft.

Capacity helps you load the washer correctly. Overloading can cause out-of-balance spinning, extra vibration, and wear on suspension and drive components, while underloading can reduce wash performance.

A washer that is not level can act “too small” because it struggles to balance and spin properly. We follow the leveling steps in the 11027062600 installation guide to reduce noise and vibration.

Last updated: January 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore Elite washer model 11027062600, good installation, proper leveling, and routine care help reduce vibration and wear on key components like the tub bearing, drain pump, and suspension.

Most Kenmore washers fall into these ranges:

These are the most common life-reducers we see across Kenmore washers:

• Running unbalanced loads repeatedly (shakes the tub and cabinet)
• Washer not level or not firmly contacting the floor
• Overloading heavy items (blankets, rugs) too often
• Using too much detergent (can leave residue and stress the drain system)
• Ignoring early symptoms (noise, slow drain, burning smell)

Your installation and setup matter because vibration and movement accelerate wear.

• Level the washer so all four feet firmly contact the floor
• Tighten the locknut after leveling (per the installation steps)
• Avoid extension cords; use a grounded 3-prong outlet
• Recheck leveling after the first week if the washer “walks”

For the exact setup and safety steps, follow the 11027062600 installation guide.

When these parts fail, repair cost and labor often determine whether you repair or replace:

• Whirlpool washer tub bearing and drive shaft kit W10435302 (loud roar or grinding in spin)
• Water pump W10536347 (won’t drain, humming, leaks)
• Suspension W10820048 (excessive shaking, out-of-balance issues)

A washer that is level, stable, and draining correctly runs quieter, spins more efficiently, and puts less stress on the drive system. That directly supports reaching the 10 to 15 year lifespan range.

Last updated: January 2026