Kenmore Elite 79571056014 refrigerator Parts

Your Kenmore Elite refrigerator model 79571056014 has a total capacity of 27.7 cubic feet. That total includes both the fresh food compartment and the bottom freezer, and it is the number to use when comparing refrigerator size and storage class.

How to confirm the capacity for model 79571056014

Use the specifications section in the 79571056014 owner's manual and the model tag inside the cabinet to verify you are matching the exact model.

• Find the model and serial tag inside the fresh food section (commonly on a side wall).
• Confirm the model number is 79571056014 (match all digits).
• Check the specs for “total capacity” (listed in cubic feet).
• Use total capacity for comparisons; shelf and bin layout affects usable space.

Total capacity vs. “usable space”

Total capacity is a standardized measurement; usable space depends on features like door bins, crisper drawers, and freezer drawer layout.

Spec you see	What it means	Best use
Total capacity (cu. ft.)	Combined refrigerator + freezer volume	Comparing models
Refrigerator capacity	Fresh food section volume	Planning shelf/bin storage
Freezer capacity	Freezer section volume	Planning frozen storage

Why it matters

Knowing the correct cubic-foot capacity helps you compare Kenmore Elite refrigerators accurately and set realistic expectations for storage, especially when replacing bins, drawers, or door gaskets.

Last updated: January 2026

Yes. For Kenmore Elite refrigerator model 79571056014, the most reliable reset is a power reset: unplug the refrigerator (or switch off the breaker) for about 5 to 10 minutes, then restore power and set the temperature controls back to your normal settings using the 79571056014 owner's manual.

How to do a safe reset (power reset)

• Unplug the refrigerator from the wall outlet; if you cannot access the plug, turn off the circuit breaker.
• Wait 5 to 10 minutes so the control board fully powers down.
• Restore power.
• Reset the refrigerator and freezer controls to the desired settings.
• Keep doors closed for a bit and listen for fans and compressor operation.

Resetting after a power interruption

The manual guidance for power interruptions is to keep doors closed to protect food temperature. After power returns, a quick power reset (above) helps clear minor control glitches.

• If power was out 24 hours or less, keep doors closed as much as possible.
• If power was out more than 24 hours, move frozen food to cold storage.
• After power is stable, restore normal temperature settings.

What a reset will and will not fix

Symptom	Reset helps?	What to check next
Control panel acting “stuck” or unresponsive	Yes	Power reset; then check door closure and wiring at the hinge area
Cooling seems off after an outage	Sometimes	Give it several hours; confirm vents are not blocked
Water or ice issues	Sometimes	Replace filter; check water supply and valve
Door alarm or light issues	Sometimes	Check door switch and door alignment

If the issue is water or ice related

A reset can clear a temporary dispenser or icemaker logic issue, but restrictions in the water path are more common.

• Replace the water filter on schedule; a clogged filter can reduce flow.
• Purge air by dispensing water for a few minutes after filter changes.
• Inspect the water line for kinks or freezing.
• If the dispenser light or door sensing seems inconsistent, test the door switch.

Helpful parts for this model:

• Genuine Kenmore refrigerator water filter 9690 AGF80300801
• Refrigerator door switch 6600JB1010A

Why it matters

Resetting correctly protects the control board and helps you separate a one-time electronic glitch from a real cooling, icemaker, or dispenser problem that needs a part replacement or service.

Last updated: January 2026

On Kenmore Elite refrigerator model 79571056014, the ER FF code points to a freezer evaporator fan problem. That fan moves cold air through the freezer and into the fresh food section, so when it fails or is blocked, cooling performance drops.

What to check first (quick, safe steps)

• Power the refrigerator off at the breaker for 1 minute, then restore power to see if the code clears.
• Make sure the freezer door closes fully and nothing is holding it open.
• Listen for the evaporator fan: a steady fan sound should run when the unit is cooling.
• Check for heavy frost or ice buildup on the freezer back wall (airflow restriction).
• Confirm vents are not blocked by food packages.
• If the fan is noisy, intermittent, or silent during cooling, plan for fan circuit diagnosis.

Common causes behind ER FF

Likely cause	What you typically notice	What usually fixes it
Ice buildup restricting the fan	Rattling, scraping, or fan stops	Defrost and correct the root cause (door seal, defrost issue)
Evaporator fan motor failure	No airflow to refrigerator section	Fan motor replacement (model-specific part lookup)
Door switch not signaling closed	Fan may stop when door is “open”	Test/replace door switch
Control or wiring issue	Fan has power issues or runs erratically	Electrical troubleshooting by a technician

Parts that can be involved

If your symptoms match, these model-specific parts are commonly related to airflow and fan operation:

• Refrigerator door switch 6600JB1010A (fan may not run if the switch fails)
• Refrigerator door gasket, right ADX73550624 (warm air leaks can cause frost that interferes with the fan)

Why it matters

The evaporator fan is the “air mover” for the whole cooling system. When airflow stops, the freezer may still feel cold at times, but the refrigerator section often warms up first, and temperatures become unstable.

For control settings, airflow guidance, and cleaning tips (including condenser coil care), follow the 79571056014 owner's manual.

You can also use our model-family troubleshooting reference for display codes: Kenmore 795 model bottom freezer refrigerator error codes.

Last updated: January 2026